2020 - 02 Dell EMC OpenManage Release Notes Version 9.4 Topics: • • • • • • • Release Type and Definition Importance Platforms Affected What is Supported What’s new in this release Important Notes Known Issues for Server Administrator This document describes the new features, enhancements, and fixed issues in Server Administrator 9.4.
Platforms Affected For a complete list of supported Dell PowerEdge systems and supported Operating systems, see the Dell EMC OpenManage Systems Software Support Matrix available in the required version of OpenManage Software at dell.com/openmanagemanuals. What is Supported Hardware Requirements • • • • Minimum of 2 GB RAM Minimum of 512 MB free hard drive space Administrator rights Monitor with a minimum screen resolution of 800 x 600.
• • Qlogic AH rNIC 10GbE BT OCP3.0 2P • Mellanox CX-5 10/25GbE PCIe 2P • QLogic 2x25GE QL41232HxCU NIC (FH) • QLogic 2x25GE QL41232HxCU NIC (LP) • Mellanox HDR100 • Mellanox CX-5 10/25GbE OCP3.0 2P • Intel Fortville 10GbE SFP+ OCP3.0 2P • Intel 2.i350 1GbE OCP3.0 2P Supported new feature: • • Support for Java Runtime Environment 11.0.4. • Support new BOSS-S1 events (PDR221,PDR222,PDR223,PDR224) in Storage Management. • Added EEMI messages to include the Part Number of the failing component.
• • • • • • If you run Server Administrator when the system is in OS Install Mode, it may report the memory incorrectly. To avoid this issue, you must disable OS Install Mode before running the application. If you have to uninstall and reinstall the operating system SNMP service, then reinstall Server Administrator, so that the Server Administrator SNMP agents are registered with the operating system SNMP agent.
Issues of Server Administrator on SUSE Linux Enterprise Server Linux Operating Systems • • JIT-117641: BIOS Setting page may be missing certain categories while Secure Boot is enabled. This is due to SLES 15 security requirements. JIT-129751: Server Administrator and Storage Management AppLaunch are missing in OpenManage Essentials. Restart DSM SA Data Manager service to resolve this issue.
• • • • • BITS080169: Documentation for Power Supply alerts mentions only AC power supply, but the alerts are valid for both AC and DC power supplies. BITS054513: On a system running Windows, while running CLI commands using telnet from a system running Linux, the telnet session may terminate if the amount of data being transferred is huge.
• • • • • • For complex omconfig CLI commands that contain multiple set commands in one command line, the CLI may report a success status for the command even if a part of the command failed. To avoid this issue, run only one command per command line. The current settings can be confirmed by performing the corresponding omreport command. Some complex omconfig CLI commands that contain multiple set operations have been modified to avoid the above problem.
inaccurate measurement of a short keep alive interval (less than 120 seconds), and the configured action may be triggered. The issue is more prevalent in systems that have only one CPU with hyper-threading unsupported/disabled or systems that are subjected to persistent stressful conditions such as, resource depletion and CPU running at 100% usage with significantly more threads than normal usage. • • • • • • • The Auto Recovery feature is not enabled by default.
• • Rename the file keystore.db.bak at \Dell\SysMgt\apache- tomcat\conf\ to keystore.db On systems running Linux: • • • • • • • • • • • • • • • • Delete the keystore.db file at /opt/dell/srvadmin/lib64/openmanage/apache- tomcat/conf Rename the keystore.db.bak at /opt/dell/srvadmin/lib64/openmanage/apache-tomcat/conf to keystore.db 3. Start the Web server.
• • • 1. Srvadmin-racadm4. 2. Srvadmin-racadm5. Due to fluctuations in the watchdog timer, the Last Crash Screen may not be captured when the Automatic System Recovery is set to a value of less than 30 seconds. To ensure the correct functioning of the Last Crash Screen feature, set the System Reset Timer to at least 30 seconds. DF132894: The cfgDNSServer1 and cfgDNSServer2 properties of group cfgLanNetworking may be set to identical values while swapping addresses.
2020 - 02 • • • • • • • DF384061: Self-signed certificate does not enable the compatibility listener in Windows 2008 R2 managed node. On a Windows 2008 R2 managed node, a valid CA signed certificate is required to create compatibility mode WinRM Listener. You cannot create a compatibility mode listener with a self-signed certificate. DF380725: On Internet Explorer or Firefox Web browsers, you cannot attach files to an e- mail if the filename contains non-ASCII letters.
• • • • • List of firmware for PERC controllers List of firmware for BOSS-S1 controllers Microsoft Windows Drivers for PERC Controllers Linux Drivers for PERC Controllers Installation and Configuration Notes Known Issues and Workarounds for Storage Management Service • With Chinese or Japanese language browser settings, using the Storage Management Service Advanced Create Virtual Disk Wizard may occasionally result in text overflowing to the bottom of the side-by-side blue text boxes.
Solution: Use a supported web browser other than Internet Explorer 9.x or 10.x or use the Storage Management command line interface (CLI) to create the virtual disk. See the Dell EMC OpenManage Server Administrator Release Notes for information on supported browsers. See the Storage Management online Help or the "Server Administrator Command Line Interface User's Guide" for information on using the Storage Management CLI.
• • JIT-8442 (BITS221272): Few enclosure alerts such as Enclosure power on/off and Fan removal, does not appear if the enclosure is connected to the server using a SAS 12 Gbps HBA card. Restart Data Manager Service to update component status. JIT-10933 (BITS240247): Storage Management does not display the Device name on a system where there more than 300 virtual disks. • JIT-16919 (BITS270856): On Precision 7910 running a client operating system (for example, Windows 8.1 x64), the PERC 9.
• JIT-96670: On systems running VMware operating systems if the sfcbd-watchdog is stopped abruptly before completion of the SNMP traps for storage task is logged. Semaphore leak is observed. Workaround: Run the sfcbd-watchdog until SNMP traps for storage task is completed. • JIT-96484: Auto Config RAID 0 task fails and displays improper error message, when there are no free drives to create RAID 0 virtual disks on the server. Exit the wizard of the error page as Server Administrator log out.
• JIT-112768 : On systems running Suse Linux Enterprise 15.0 operating system the device protocol of Intel NVMe P4800x devices displays NVMe 0.0 instead of NVMe 1.0. • JIT-113374: While creation of R10, R50 and R60 virtual disks the Storage Management does not display the dedicated hot-spare suggestions for all disks, if the user selects different size of physical disks as part of virtual disk creation.
• • JIT-155954: While hot-plug-in mulitple drives of MX5016s physically, wait for each insert alert to avoid the wrong enumeration. Work around: Restart the Data manager service to get the updated enumeration. JIT-156411: On PowerEdge R7525 when multiple NVMe drives hot plugged while PTR is in progress, observing wrong enumeration of NVMe drives on OMSA page. This is observing only when Toshiba drive is part of either hot plug operation or PTR (Prepare to remove).
• • • • Solution: If you are using thttpd, upgrade to version 2.0. Else, contact the vendor for a patch or change the web server. CVE on this one is CAN-2000-0359". Enabling Integrated Windows Authentication in Internet Explorer is not required to activate the Single Sign-On feature. The Server Administrator security settings are not applicable for Active Directory users.
Controller Firmware/BIOS PERC H310 Mini Blades 20.12.0-0004 PERC H710 Adapter 21.2.0-0007 PERC H710 Mini Blades 21.2.0-0007 PERC H710 Mini Monolithic 21.2.0-0007 PERC H710P Adapter 21.2.0-0007 PERC H710P Mini Blades 21.2.0-0007 PERC H710P Mini Monolithic 21.2.0-0007 PERC H810 Adapter 21.2.0-0007 PERC S110 3.0.0.0139 PERC S100 2.0.0-0162 PERC S300 2.0.0-0166+00193000 PERC S130 4.2.0-0009 PERC S140 5.1.0.0006 PERC H730P Adapter 25.5.5.000X PERC H730P Mini Blades 25.5.5.
Controller Firmware/BIOS FD33XS-PERC Single 25.5.5.000X 12Gbps SAS HBA 03.17.01.00 HBA 330 MX 15.17.09. 08 HBA 330 MMZ 15.17.09.08 PERC H745P MX 50.3.0-1512 PERC H730P MX 25.5.5-005 FD33XD-HBA Dual 15.17.09.07 FD33XS-HBA Single 15.17.09.07 PERC S150 6.0.0-0011 PERC H745 50.9.0-2949 PERC H345 50.9.0-2949 HBA 345 11.08.01.00 List of firmware for BOSS-S1 controllers Table 4. List of Firmware for BOSS-S1 controllers Controller Firmware/BIOS BOSS-S1 Adapter 2.5.13.
Controller Windows Server 2012 - R2 / 2016 Driver Windows Server 2019 Driver SAS 6/iR Modular Not Applicable Not Applicable LSI 1020 on a PowerEdge 1600SC Not Applicable Not Applicable LSI 1030 on a PowerEdge 1750 Not Applicable Not Applicable PERC H800 Adapter Not Applicable Not Applicable PERC H700 Integrated Not Applicable Not Applicable PERC H700 Adapter Not Applicable Not Applicable PERC H700 Modular Not Applicable Not Applicable PERC H200 Adapter Not Applicable Not Applicable
Controller Windows Server 2012 - R2 / 2016 Driver Windows Server 2019 Driver PERC H730 Mini Blades 6.604.06.00 6.604.06.00 PERC H730 Mini Monolithic 6.604.06.00 6.604.06.00 PERC H740P Adapter 7.703.06.00 7.703.06.00 PERC H740P Mini Monolithic 7.703.06.00 7.703.06.00 PERC H840 Adapter 7.703.06.00 7.703.06.00 PERC H330Adapter 6.604.06.00 6.604.06.00 PERC H330 Mini 6.604.06.00 6.604.06.00 PERC H330 Mini Blades 6.604.06.00 6.604.06.00 PERC H330 Embedded 6.604.06.00 6.604.06.
Controller Windows Server 2016 / 2019 Driver BOSS-S1 Modular 1.2.0.1048 Linux Drivers for PERC Controllers 6/E Adapter, PERC 6/i Integrated, PERC 6/i Adapter, SAS 6/iR Integrated, SAS 6/iR Adapter, SAS 6/int.
Controller Red Hat Linux 7.7 64-Bit Driver Red Hat Linux 8.0 64-Bit Driver VMware ESXi 6.7 Driver VMware ESXi 6.5 Driver SUSE Linux 15 64-Bit Driver UBUNTU 18.04.
Controller Red Hat Linux 7.7 64-Bit Driver Red Hat Linux 8.0 64-Bit Driver VMware ESXi 6.7 Driver VMware ESXi 6.5 Driver SUSE Linux 15 64-Bit Driver UBUNTU 18.04.
Controller Red Hat Linux 7.7 64-Bit Driver Red Hat Linux 8.0 64-Bit Driver VMware ESXi 6.7 Driver VMware ESXi 6.5 Driver SUSE Linux 15 64-Bit Driver UBUNTU 18.04.03 PERC H345 Adapter Native Native Native Native Native Native HBA345 Frnt Native Native Native Native Native Native HBA345 Adp Native Native Native Native Native Native Table 8. Linux Drivers for BOSS-S1 Controller Controller Red Hat Linux 7.7 Red Hat Linux VMware ESXi 6.7 64bit Driver 8.
© 2020 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners. Dell EMC OpenManage Release Notes Version 9.