Operating instructions

Installing the DRAC 2-3
NOTE: The DRAC should only be connected to a switch or hub that supports a
10Base-T Ethernet connection. Figure 2-1 shows the input and output connectors.
9. Replace the computer cover.
10. Plug the external power adapter into the input connector on the DRAC.
The DRAC does not require the external power adapter; however, using it allows
the DRAC to remain operational when the server is off.
11. Reconnect the computer and all associated peripheral devices to their AC power
sources and turn them on.
 
+
After you install the DRAC, you will need to install or upgrade the HP OpenView NNM
SE with Dell OpenManage HIP.
)#
An updated version of the Dell OpenManage HIP is included on the CD that
accompanies the DRAC. Follow the installation instructions provided with the CD.
PC Card socket
external power
input connector
RJ-45 connector
link LED (green)
activity LED (amber)