Operating instructions

Troubleshooting and Maintenance 4-3


 !"
ESM program memory
may be temporarily cor-
rupted, or the communica-
tion path to the ESM may
have been interrupted.
Turn the system off and on
again to reset the ESM.
#



The on-board temperature
of the DRAC has exceeded
its failure range.
Check for a fan failure or
obstructed airflow. If
necessary, replace the fan.
Otherwise, turn off the
system and call Dell for
technical assistance.
#



The on-board temperature
of the DRAC has returned
to its normal range.
No action is required.
!"#$"" 
%
  
#


The on-board temperature
of the DRAC has exceeded
its warning range.
Make sure the user-settable
temperature threshold is set
correctly. Check for a fan
failure or obstructed
airflow. Check that the com-
puter cover is properly
attached. If necessary,
replace the fan. If the
problem persists, turn off
the system and call Dell for
technical assistance.





The voltage of the external
AC power adapter for the
DRAC has exceeded its
failure range.
Make sure the adapter plug
is fully seated in the card
and the power cable is
attached to the electrical
outlet.





The voltage of the external
AC power adapter for the
DRAC has returned to its
normal range.
No action is required.
!"#$"" 
%
  