Operating instructions

4-4 Dell OpenManage Remote Assistant Card Version 2.x User’s Guide
$,
If you get an error message related to the DRAC battery in the Windows NT system
log, the NNM SE event log, or the DRAC event log in the Dell OpenManage Remote
Assistant, the battery pack may need replacement.
1
Follow these instructions to remove the battery pack.
$%&
!"
!

)+,''')+-.''/

1. Turn off the computer and disconnect all peripherals.
/:+);

2. Remove the cover.
3. Remove the DRAC from the system.
For additional instructions, see the section titled “Expansion Cards” in your Dell
PowerEdge system
Installation and Troubleshooting Guide
.
4. Disconnect the battery wire harness from the DRAC.
5. Remove the four screws from the battery housing.
NOTE: The nickel-metal hydride battery pack should be disposed of at the proper
recycling facility.




The voltage of the external
AC power adapter for the
DRAC has exceeded its
warning range.
Make sure the user-settable
voltage threshold is set
correctly. Make sure the
adapter plug is fully seated
in the card and the power
cable is attached to the
electrical outlet.
!"#$"" 
%