Operating instructions

Troubleshooting and Maintenance 4-5
)"#1
Follow these instructions to install the new battery pack:
1. Attach the battery pack to the card using the four screws removed in the previous
section.
Make sure that the battery is oriented with the wire harness toward the PC Card
socket.
2. Connect the battery wire harness to the header (J8).
Press firmly until the connector snaps into place.
3. Reinstall the DRAC in the system.
Verify that the DRAC is installed in the proper slot for the system. For additional
instructions, see the section titled “Expansion Cards” in your Dell PowerEdge
system
Installation and Troubleshooting Guide
.
4. Reconnect the system peripherals and power up the system.