Operating instructions

A-2 Dell OpenManage Remote Assistant Card Version 2.x User’s Guide
+
The network interface on the DRAC is an Institute of Electrical and Electronics
Engineers (IEEE) 802.3I 10Base-T industry standard for a 10 megabits per second
(Mbps) carrier sense multiple access/collision detection (CSMA/CD) local area
network (LAN). The Ethernet address of the card is marked on the back of the card.

The connectors on the DRAC are summarized in Table A-2 and shown in Figure A-1.
 
 
  
J2
RS232 serial port connector 9-pin connector
J4
PCMCIA modem socket 68-pin connector
J5
IPMI connector 20-pin connector
J6
External AC power jack 3-pin connector
J8
Battery connector 3-pin connector
J9
RJ45, for LAN connector 8-pin connector
J10
ESM connector 20-pin connector
J2 serial
connector
J6 power
J9 LAN
J8 battery connector
J8 IPMI connector
J10 ESM connector
J4 PCMCIA socket