USB Enhanced and Integrated Ethernet Service Manual

Beep Codes and Error Messages 3-7
Memory
address line
failure at
address , read
value expect-
ing value
Memory data
line failure
at address ,
read value
expecting value
Memory double
word logic
failure at
address , read
value expect-
ing value
Memory odd/
even logic
failure at
address , read
value expect-
ing value
Memory write/
read failure
at address ,
read value
expecting value
During memory test,
value read at
address
was incorrect.
Faulty or improperly
seated DIMMs or defec-
tive system board.
Memory alloca-
tion error
Software in use con-
flicts with operating
system, application pro-
gram, or utility.
Faulty application pro-
gram or utility.
Memory tests
terminated by
keystroke
Memory test did not
complete.
POST memory test termi-
nated by pressing
<Spacebar>.
"Network card
is not
present in
the system"
System does not detect
NIC.
Incorrect NIC drivers
installed.
Table 3-2. System Error Messages
(continued)
Message Definition Probable Causes