User's Manual


Removing a Hard Drive

1. If you are replacing a hard drive that contains data you want to keep, back up your files before you begin this procedure.

2. Check the documentation for the drive to verify that it is configured for your computer.

3. Follow the procedures in "Before You Begin."

4. Disconnect the power and hard-drive cables from the drive. Disconnect the hard-drive cable from the system board.

5. Press in on the blue release tabs on each side of the drive and slide the drive up and out of the computer.

Installing a Hard Drive

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the computer cover.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently
cushion it.
1
hard-drive cable
2
hard-drive cable on system board
3
power cable
1
hard drive
2
release tabs (2)