Owners Manual

Installing the hard drive into the hard drive bracket

1 Align and insert the pins on the hard drive bracket with the slots on one side of the hard drive.

2 Flex the other side of the hard drive bracket, and align and insert the pins on the bracket into the hard drive.

3 Install the:

a hard drive assembly

b bezel

c cover

4 Follow the procedure in After Working Inside Your Computer.

Installing the hard drive assembly

1 Insert the hard drive assembly into the slot on the computer until it clicks into place.

2 Close the front bezel door.

3 Connect the SATA cable and the power cable to the connectors on the hard drive.

4 Install the:

• bezel

• cover

5 Follow the procedure in After Working Inside Your Computer.

Removing the slim optical drive

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

• cover

• bezel

3 To remove the optical drive:

a Open the front bezel door.

b Disconnect the data cable and power cable from the connectors on the optical drive [1, 2].

c Close the front bezel door [3].

d Press the blue release tab [4] and slide the optical drive out of the computer [5].

Removing and installing components