Owners Manual

Removing the SD card reader

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

• cover

• bezel

3 Open the front bezel door.

4 To remove the SD card reader:

a Disconnect the SD card reader cable from the connector on the system board [1].

b Remove the screw that secures the SD card reader to the computer [2].

c Lift the SD card reader out of the computer [3].

Installing the SD card reader

1 Insert the SD card reader into the slot on the system board.

2 Tighten the screw to secure the SD card reader to the system board

3 Connect the SD card reader cable to the connector on the system board.

4 Close the front bezel door.

5 Install the:

a bezel

b cover

6 Follow the procedure in After Working Inside Your Computer.

Removing the memory module

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

• cover

• bezel

3 Open the front bezel door.

4 To remove the memory module:

a Press the memory module retention tabs on both sides of the memory module.

b Lift the memory module from the memory module connector on the system board.

Removing and installing components