Owners Manual

3 Secure the PCIe expansion card by pushing the card retention latch until it clicks into place.

4 Close the release latch.

5 Close the front bezel door.

6 Install the:

a bezel

b cover

7 Follow the procedure in After Working Inside Your Computer.

Removing the optional Ethernet port card

NOTE: The location of the Ethernet port card may vary from what is displayed in the illustration.

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

• cover

• bezel

3 Open the front bezel door.

4 To remove the Ethernet port card:

a Pull the release latch to open it [1].

b Hold the Ethernet port card and pull it to disengage it from the slot on the system board.

c Lift the Ethernet port card from the computer [2].

Installing the optional Ethernet port card

1 Pull the release latch to open it.

2 Align the Ethernet port card with the slot on the back on the computer and the card connector with the connector on the system

board.

3 Insert the Ethernet port card into the connector on the system board until it clicks into place.

4 Close the release latch.

5 Install the:

a bezel

b cover

6 Close the front bezel door.

7 Follow the procedure in After Working Inside Your Computer.

Removing and installing components