Owners Manual
Option Description
• Processor Information: Displays Processor Type, Core Count, Processor ID, Current Clock
Speed, Minimum Clock Speed, Maximum Clock Speed, Processor L2 Cache, Processor L3
Cache, HT Capable, and 64-Bit Technology.
• Device Information: Displays SATA-0, LOM MAC Address, Video Controller, Audio Controller,
Wi-Fi Device, and Bluetooth Device.
Boot Sequence Allows you to specify the order in which the computer attempts to nd an operating system from the
devices specied in this list.
• Legacy
• UEFI
Advanced Boot Options Allows you to select the Enable Legacy Option ROMs option, when in UEFI boot mode. By default,
this option is enabled.
Date/Time Allows you to set the date and time settings. Changes to the system date and time take eect
immediately.
Table 6. System Conguration
Option Description
Integrated NIC Allows you to control the on-board LAN controller. The options are:
• Disabled
• Enabled (default)
• Enabled w/PXE
• Enabled w/Cloud Desktop
NOTE: Depending on the computer and its installed devices, the items listed in this section
may or may not appear.
WIDI Allows you to connect to display through WiFi. WIDI requires Intel WiFi card, Intel graphics, and WIDI
receiver in display (or WIDI compliant display). To install the WIDI application, see the dell.com/
support site to download the WIDI application.
NOTE: When installing the WIDI application, connect the display to Intel on-board graphic
output.
Serial Port Allows you to determine how the built-in serial port to operate. The options are:
• Disabled
• COM 1 – Default setting
• COM 2
• COM 3
• COM 4
SATA Operation Allows you to congure the operating mode of the integrated hard drive controller.
• Disabled = The SATA controllers are hidden
• AHCI = SATA is congured for AHCI mode
Drives Allows you to enable or disable the various drives on-board:
• SATA-0
• SATA-1
• SATA-2
• SATA-3
32 System Setup