Owners Manual

3 Install the:

a Heat sink assembly

b Hard drive and optical drive module

c HDD assembly

d Front bezel

e Side cover

4 Follow the procedure in After working inside your computer.

Power switch

Removing power switch

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a Side cover

b Front bezel

c HDD assembly

d Hard drive and optical drive module

3 To remove the power switch:

a Disconnect the power switch cable from the system board [1].

b Press the power switch retention tabs and pull the power switch out from the system [2] [3].

Removing and installing components