Owners Manual

Table 29. Maintenance (continued)
Option Description
SERR Messages Controls the SERR message mechanism. This option is set by default. Some graphics cards require that
the SERR message mechanism be disabled.
BIOS Downgrade
Allows you to flash previous revisions of the system firmware.
• Allow BIOS Downgrade
This option is set by default.
Bios Recovery
BIOS Recovery from Hard Drive—This option is set by default. Allows you to recover the corrupted
BIOS from a recovery file on the HDD or an external USB key.
BIOS Auto-Recovery— Allows you to recover the BIOS automatically.
NOTE: BIOS Recovery from Hard Drive field should be enabled.
Always Perform Integrity Check—Performs integrity check on every boot.
First Power On Date Allows you the set Ownership date. The option Set Ownership Date is not set by default.
System logs
Table 30. System Logs
Option Description
BIOS events
Allows you to view and clear the System Setup (BIOS) POST events.
Advanced configuration
Table 31. Advanced configuration
Option Description
ASPM Allows you to set the ASPM level.
• Auto (default) - There is handshaking between the device and PCI Express hub to determine the
best ASPM mode supported by the device
• Disabled - ASPM power management is turned off at all time
• L1 Only - ASPM power management is set to use L1
SupportAssist System Resolution
Option
Description
Auto OS Recovery
Threshold
Allows you to control the automatic boot flow for SupportAssist System. Options are:
• Off
• 1
• 2 (Enabled by default)
• 3
SupportAssist OS
Recovery
Allows you to recover the SupportAssist OS Recovery (Disabled by default)
System setup 25