OptiPlex 3080 Tower Service Manual Regulatory Model: D29M Regulatory Type: D29M002 May 2020 Rev.
Märkused, ettevaatusabinõud ja hoiatused MÄRKUS: MÄRKUS tähistab olulist teavet, mis aitab teil toodet paremini kasutada. ETTEVAATUST: ETTEVAATUST tähistab teavet, mis hoiatab võimaliku riistvarakahju või andmekao eest ja annab juhiseid selle probleemi vältimiseks. HOIATUS: HOIATUS tähistab teavet, mis hoiatab võimaliku varakahju või tervisekahjustuse või surma eest. © 2020 Dell Inc. või selle tütarettevõtted. Kõik õigused kaitstud. Dell, EMC ja muud kaubamärgid on ettevõtte Dell Inc.
Contents Chapter 1: Arvutiga töötamine.......................................................................................................6 Ohutusjuhised....................................................................................................................................................................... 6 Enne arvuti sees toimetamist......................................................................................................................................
Mälumoodulite eemaldamine.....................................................................................................................................35 Mälumoodulite paigaldamine..................................................................................................................................... 36 Protsessori ventilaatori ja jahutusradiaatori koost.....................................................................................................
Süsteemi tõrketeated....................................................................................................................................................... 78 Wi-Fi-toitetsükkel.............................................................................................................................................................. 79 Chapter 6: Abi saamine................................................................................................................80 Delli kontaktteave..
1 Arvutiga töötamine Teemad: • Ohutusjuhised Ohutusjuhised Et kaitsta arvutit viga saamise eest ja tagada enda ohutus, kasutage järgmisi ohutusjuhiseid. Kui pole teisiti märgitud, eeldab iga selles dokumendis sisalduv toode, et olete arvutiga kaasas olevat ohutusteavet lugenud. MÄRKUS: Enne arvuti sisemuses tegutsema asumist tutvuge arvutiga kaasas oleva ohutusteabega. Ohutuse heade tavade kohta leiate enam teavet nõuetele vastavuse kodulehelt veebiaadressil www.dell.com/regulatory_compliance.
3. Ühendage arvuti ja kõik selle küljes olevad seadmed elektrivõrgust lahti. 4. Ühendage arvuti küljest lahti kõik võrgu- ja välisseadmed, nagu klaviatuur, hiir, monitor jne. ETTEVAATUST: Võrgukaabli lahti ühendamiseks ühendage kaabel esmalt arvuti küljest ja seejärel võrguseadme küljest lahti. 5. Kui arvutiga on ühendatud meediumikaarte või optilisi draive, siis eemaldage need.
● Kasutage korralikult maandatud kaabliga ESD-randmerihma. Juhtmeta antistaatiliste rihmade kasutamine ei ole enam lubatud, sest need ei paku piisavat kaitset. Korpuse puudutamine enne osade käsitsemist ei kaitse suurema ESD-tundlikkkusega komponente piisavalt. ● Käsitsege kõiki staatilise elektri suhtes tundlikke komponente antistaatilises piirkonnas. Võimaluse korral kasutage antistaatilisi põranda- ja töölauamatte.
Pärast arvuti sees toimetamist See ülesanne ETTEVAATUST: Arvuti sisse lahtiste kruvide jätmine võib arvutit tõsiselt kahjustada. Sammud 1. Paigaldage kõik kruvid ja veenduge, et arvuti sisse pole jäänud ühtegi lahtist kruvi. 2. Ühendage kõik välisseadmed ja kaablid, mille eemaldasite, kui arvuti kallal töötama hakkasite. 3. Ühendage kõik meediumikaardid, kettad või muud osad, mille eemaldasite, kui arvuti kallal töötama hakkasite. 4. Ühendage arvuti ja kõik selle küljes olevad seadmed toitepistikusse. 5.
2 Tehnoloogia ja komponendid Selles peatükis täpsustatakse süsteemi tehnoloogiat ja saadaolevaid komponente. Teemad: • • Graafikavalikud Süsteemihalduse funktsioonid Graafikavalikud Intel UHD 610 graafika Tabel 1.
Tabel 2. Intel UHD 630 graafika tehnilised andmed (jätkub) Intel UHD 630 graafika Ülekattetasandid Jah Operatsioonisüsteemide graafika / video API tugi DirectX 12, OpenGL (4,5 Intel CML POR-ist) Toetab maksimaalset eraldusvõimet ● DP: 4096 × 2304 sagedusel 60 Hz, 24 bpp ● Valikuline DP: 4096 × 2304 sagedusel 60 Hz ● Valikuline USB-C alternatiivrežiim: 4096 × 2304 sagedusel 60 Hz ● Valikuline VGA: 1920 × 1200 sagedusel 60 Hz ● Valikuline HDMI 2.
Tabel 3. NVIDIA GeForce GT 730 tehnilised andmed (jätkub) Funktsioon Väärtused Maksimaalne eraldusvõime 3840 × 2160 Energiatarve u ● 20 W TDP 30 W TGP 3DMarki jõudlus ● 3DMark 11 (P): E4131 ● 3Dmark Vantage(P): AMD Radeon RX 640 Tabel 4. AMD Radeon RX 640 tehnilised andmed Funktsioon Väärtused GPU sagedus 1,2 GHz DirectX 12 Varjutaja mudel 5,0 Open CL 2,0 Open GL 4,5 GPU mäluliides 128-bitine PCIe-siin PCIe 3.
AMD Radeon R5 430 Tabel 5. AMD Radeon R5 430 tehnilised andmed Funktsioon Väärtused GPU sagedus 780 MHz DirectX 11,2 Varjutaja mudel 5,0 Open CL 1,2 Open GL 4,2 GPU mäluliides 64-bitine PCIe-siin PCIe 3.0 x8 Ekraani tugi Üks DisplayPort 1.
Dell Client Command Suite ribasiseste süsteemide halduseks Dell Client Command Suite on tasuta tööriistakomplekt, mille saab kõigile Latitude Ruggedi tahvelarvutitele aadressilt dell.com/support alla laadida ning mis automatiseerib ja lihtsustab süsteemihalduse ülesandeid, säästes aega, raha ja ressursse. See koosneb järgmistest moodulitest, mida saab kasutada iseseisvalt või mitmesuguste süsteemihalduskonsoolidega, nagu SCCM.
3 Süsteemi peamised komponendid 15
Süsteemi peamised komponendid 16 Süsteemi peamised komponendid
MÄRKUS: Ostetud süsteemi algse konfiguratsiooni komponentide loendi ja komponentide osade numbrid saate Dellilt. Need osad on saadaval kliendi ostetud garantii ulatuse kohaselt. Teabe saamiseks ostmisvõimaluste kohta pöörduge Delli müügiesindaja poole.
4 Lahtivõtmine ja kokkupanek Teemad: • • • • • • • • • • • • • • • • • • • • • Külgkate Esiraam Ventilaatori kanal Kõvakettasõlm 3,5-tolline kõvaketas Välkdraiv Mälumoodulid Protsessori ventilaatori ja jahutusradiaatori koost Protsessor Graafikakaart Graafikaprotsessor Nööppatarei WLAN-kaart Õhuke optiline draiv Õhukese optilise draivi klamber Kõlar Toitenupp Toiteplokk Sissetungilüliti Valikulised I/O-moodulid (tüüp C / HDMI / VGA / DP / jada) Emaplaat Külgkate Külgkatte eemaldamine Eeltingimused 1.
Sammud 1. Keerake lahti käsikruvi (nr 6–32), millega külgkatted on arvuti külge kinnitatud. 2. Lükake katet arvuti tagaosa poole ja tõstke see arvuti küljest ära.
Külgkatte paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmisel pildil on näidatud külgkatte asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Leidke arvutil üles külgkatte pesa. 2. Joondage külgkatte sakid korpuse pesadega. 3. Paigaldamiseks libistage külgkatet arvuti esiosa suunas. 4. Paigaldage käsikruvi (nr 6-32), et külgkate arvuti külge kinnitada. Järgmised sammud 1. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Esiraam Esiraami eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate.
2. Tõmmake ja pöörake esiraami ettevaatlikult, et teised esiraamil olevad sakid arvuti korpuse pesadest vabastada. 3. Eemaldage esiraam arvuti küljest. Esiraami paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmisel pildil on näidatud esiraami asukoht ja kujutatud visuaalselt paigaldamistoimingut. Sammud 1. Joondage esiraami sakid korpusel olevate pesadega. 2. Vajutage raami, kuni sakid klõpsuga kinnituvad.
Ventilaatori kanal Ventilaatori kanali eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. See ülesanne Järgmistel piltidel on näidatud ventilaatori kanali asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Vabastamiseks vajutage ventilaatori kanali mõlemal küljel olevaid kinnitussakke. 2. Tõmmake ja eemaldage ventilaatori kanal arvuti küljest.
Sammud 1. Paigutage ventilaatori kanal nii, et see oleks arvuti korpuse pesadega kohakuti. 2. Suruge ventilaatori kanalit, kuni see klõpsuga kinnitub. Järgmised sammud 1. Paigaldage külgkate. 2. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Kõvakettasõlm 2,5-tollise kõvaketta koostu eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal.
Sammud 1. Ühendage kõvaketta andmekaabel ja toitekaabel 2,5-tollise kõvaketta mooduli liitmike küljest lahti. 2. Vajutage kõvaketta raami mõlemal küljel olevaid vabastussakke, et kõvaketas arvuti korpuse pesadest vabastada. 3. Kallutage kõvaketta koostu, kergelt nurga all. 4. Võtke kõvaketta koost arvutist välja. MÄRKUS: Jätke kõvaketta asend meelde, et saaksite selle õigesti tagasi panna. 2,5-tollise kõvaketta raami eemaldamine Eeltingimused 1. 2. 3. 4.
See ülesanne Järgmistel piltidel on näidatud 2,5-tollise kõvaketta raami asukoht ja need illustreerivad eemaldamistoimingut. Sammud 1. Eemaldage kaks kruvi (M3 × 3,5), millega esimene kõvaketas on kõvaketta raami külge kinnitatud. 2. Lükake kõvaketast ja tõstke see kõvaketta metallraamist välja. 3. Eemaldage kaks kruvi (M3 × 3,5), millega teine kõvaketas on metallraami külge kinnitatud. 4. Lükake teist kõvaketast ja tõstke see kõvaketta metallraamist välja.
. Lahtivõtmine ja kokkupanek 27
Sammud 1. Asetage esimene kõvaketas kõvaketta metallraami ja joondage raami pesad kõvaketta pesadega. 2. Paigaldage kaks kruvi (M3 × 3,5), et esimene kõvaketas metallraami külge kinnitada. 3. Asetage teine kõvaketas kõvaketta metallraami ja joondage raami pesad kõvaketta pesadega. 4. Paigaldage kaks kruvi (M3 × 3,5), et teine kõvaketas metallraami külge kinnitada. Järgmised sammud 1. 2. 3. 4. Paigaldage 2,5-tollise kõvaketta koost. Paigaldage ventilaatori kanal. Paigaldage külgkate.
Sammud 1. Joondage kõvaketta koost nurga all arvutis oleva pesaga. 2. Vajutage kõvaketta raamil olevaid vabastussakke ja liigutage kõvaketta koostu arvuti korpusel olevasse pessa sisestamiseks veidi tahapoole. 3. Ühendage kõvaketta andmekaabel ja toitekaabel 2,5-tollise kõvaketta mooduli liitmike külge. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3.
2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal. See ülesanne Järgmistel piltidel on näidatud 3,5-tollise kõvaketta asukoht ja need illustreerivad eemaldamistoimingut. Sammud 1. Ühendage 3,5-tollise kõvaketta toite- ja andmesidekaabel lahti. 2. Eemaldage korpuse esiküljelt neli kruvi (6–32), millega kõvaketas on korpuse külge kinnitatud. 3. Võtke 3,5-tolline kõvaketas korpusest välja.
paigaldamine Sammud 1. Joondage 3,5-tolline kõvaketas pesaga ja asetage korpusesse. 2. Hoidke kõvaketast vastu korpust ja paigaldage neli kruvi (6–32), et kõvaketas arvuti korpuse külge kinnitada. 3. Ühendage toite- ja andmesidekaabel kõvakettaga. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Välkdraiv M.2 2230 PCIe välkdraivi eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2.
Sammud 1. Eemaldage kruvi (M2 × 3,5), millega pooljuhtketas on emaplaadi külge kinnitatud. 2. Tõstke ja eemaldage pooljuhtketas emaplaadi küljest. M.2 2230 PCIe välkdraivi paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Joonisel on näidatud pooljuhtketta asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Joondage pooljuhtketta sälk pooljuhtketta pistmiku sakiga. 2. Sisestage pooljuhtketas 45-kraadise nurga all emaplaadil olevasse pessa. 3. Paigaldage kruvi (M2 × 3,5), millega M.2 2230 pooljuhtketas emaplaadi külge kinnitatakse. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist M.2 2280 PCIe välkdraivi eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate.
Sammud 1. Eemaldage kruvi (M2 × 3,5), millega välkdraiv on emaplaadi külge kinnitatud. 2. Tõstke ja eemaldage välkdraiv emaplaadi küljest. M.2 2280 PCIe välkdraivi paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Joonisel on näidatud välkdraivi asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Joondage välkdraivi sälk selle pistmiku sakiga. 2. Sisestage välkdraiv 45-kraadise nurga all emaplaadil olevasse pessa. 3. Paigaldage kruvi (M2 × 3,5), millega M.2 2280 välkdraivi emaplaadi külge kinnitatakse. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Mälumoodulid Mälumoodulite eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3.
Sammud 1. Tõmmake mälumooduli mõlemal küljel olevaid kinnitusklambreid, kuni mälumoodul pesast välja hüppab. 2. Nihutage mälumoodul selle pesast välja ja eemaldage. Mälumoodulite paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmisel pildil on näidatud mälumoodulite asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Joondage mälumoodulil olev sälk mälumooduli pesa lapatsiga. 2. Lükake mälumoodul nurga all kindla liigutusega pesasse ja suruge seda allapoole, kuni see oma kohale lukustub. MÄRKUS: Kui te klõpsatust ei kuule, siis eemaldage mälumoodul ja pange uuesti sisse. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3.
See ülesanne Järgmistel piltidel on näidatud protsessori ventilaatori ja jahutusradiaatori asukoht ning kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Eemaldage protsessori ventilaatori kaabel emaplaadil olevast pistmikust. 2. Vabastage neli kinnituskruvi, millega protsessori ventilaatori ja jahutusradiaatori koost on emaplaadi külge kinnitatud. 3. Eemaldage protsessori ventilaatori ja jahutusradiaatori koost emaplaadilt.
Sammud 1. Joondage protsessori ventilaatori ja jahutusradiaatori koostu kruviaugud emaplaadi kruviaukudega. 2. Keerake kinni neli kinnituskruvi, mis kinnitavad protsessori ventilaatori ja jahutusradiaatori koostu emaplaadi külge. 3. Ühendage protsessori ventilaatori kaabel emaplaadil oleva pistmikuga. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Protsessor Protsessori eemaldamine Eeltingimused 1. 2. 3. 4.
Sammud 1. Vajutage vabastushoob alla ja lükake see kinnitussakist vabastamiseks protsessorist eemale. 2. Tõstke hoob üles ja tõstke protsessori katet. ETTEVAATUST: Protsessori eemaldamisel ärge puudutage pesas olevaid kontakte ja vältige nendele esemete kukkumist. 3. Tõstke protsessor õrnalt protsessori pesast välja. Protsessori paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist.
Sammud 1. Veenduge, et protsessori pesa vabastushoob oleks täielikult avatud asendisse tõstetud. 2. Joondage protsessori sälgud protsessori pesa sakkidega ja asetage protsessor selle pessa. MÄRKUS: Protsessori 1. viigu nurgas on kolmnurk, mis joondub protsessori pesa 1. viigu nurgas oleva kolmnurgaga. Kui protsessor on korralikult pesas, asetsevad kõik neli nurka samal kõrgusel. Kui protsessori üks või mitu nurka on teistest kõrgemad, ei ole protsessor korralikult pesas. 3.
Graafikakaart Graafikakaardi eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal. See ülesanne Järgmistel piltidel on näidatud graafikakaardi asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Leidke graafikakaart (PCI-Express). 2. PCIe luugi avamiseks tõstke tõmbesakki. 3. Lükake ja hoidke graafikakaardi pesa kinnitussakki ning tõstke graafikakaart selle pesast välja.
Graafikakaardi paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud graafikakaardi asukoht ja kujutatud visuaalselt paigaldamistoimingut. Sammud 1. Joondage graafikakaart emaplaadil oleva PCI-Expressi kaardipesaga. 2. Ühendage graafikakaart joondusposti abil pesaga ja suruge tugevalt alla. Veenduge, et kaart oleks kindlalt pesas. 3. PCIe luugi sulgemiseks tõstke tõmbesakki. Järgmised sammud 1.
Graafikaprotsessor Toitega GPU eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal. See ülesanne Järgmistel piltidel on näidatud toitega graafikaprotsessori asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Ühendage kaks toitekaablit toitega GPU pistmike küljest lahti. 2. PCIe luugi avamiseks tõstke tõmbesakki. 3.
See ülesanne Järgmistel piltidel on näidatud nööppatarei asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Kangutage nööppatarei plastvardaga ettevaatlikult emaplaadi pesast välja. 2. Eemaldage nööppatarei arvutist. Nööppatarei paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmisel pildil on näidatud nööppatarei asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Hoidke nööppatareid nii, et märk + oleks üleval, ja lükake see pistmiku positiivsel poolel kinnitussakkide alla. 2. Vajutage patarei liidesesse, kuni see paika lukustub. Järgmised sammud 1. Paigaldage toitega GPU. MÄRKUS: See samm on vajalik ainult siis, kui arvutil on toitega GPU. 2. Paigaldage ventilaatori kanal. 3. Paigaldage külgkate. 4. Järgige protseduuri jaotises Pärast arvuti sees toimetamist WLAN-kaart WLAN-kaardi eemaldamine Eeltingimused 1. 2. 3. 4.
Sammud 1. Eemaldage kruvi (M2 × 3,5), millega WLAN-kaart on emaplaadi külge kinnitatud. 2. Eemaldage WLAN-kaardi küljest WLAN-kaardi klamber. 3. Ühendage antennikaablid WLAN-kaardi küljest lahti. 4. Eemaldage WLAN-kaart tõmmates emaplaadil olevast pesast. WLAN-kaardi paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmisel pildil on näidatud WLAN-kaardi asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Ühendage antennikaablid WLAN-kaardiga. Järgmises tabelis on toodud teie arvutis oleva WLAN-kaardi antennikaabli värviskeem. Tabel 6. Antenni kaabli värviskeem Traadita andmeside kaardi liitmikud Antenni kaabli värv Peamine (valge kolmnurk) Valge Abi (must kolmnurk) Must 2. Paigaldage WLAN-kaardi klamber, et WLAN-antennikaablid kinnitada. 3. Sisestage WLAN-kaart emaplaadil olevasse pessa. 4. Paigaldage kruvi (M2 × 3,5), et plastsakk WLAN-kaardi külge kinnitada. Järgmised sammud 1.
Õhuke optiline draiv Õhukese optilise kettaseadme eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal. See ülesanne Järgmistel piltidel on näidatud õhukese optilise kettaseadme asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Ühendage andme- ja toitekaablid õhukese optilise kettaseadme küljest lahti. 2. Tõmmake kinnitussakki, et õhuke optiline kettaseade korpuse küljest vabastada. 3.
Sammud 1. Sisestage õhukese optilise kettaseadme koost ODD-pessa. 2. Libistage õhukese optilise kettaseadme koostu, kuni see klõpsuga kinnitub. 3. Suunake toitekaabel ja andmekaabel läbi kaablisuunajate ning ühendage kaablid õhukese optilise kettaseadmega. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Õhukese optilise draivi klamber Õhukese ODD-klambri eemaldamine Eeltingimused 1. 2. 3. 4.
Sammud 1. Kangutage õhukest ODD-klambrit, et see optilisel kettaseadmel olevast pesast vabastada. 2. Eemaldage õhuke ODD-klamber optiliselt kettaseadmelt. Õhukese ODD-klambri paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud õhukese ODD-klambri asukoht ja kujutatud visuaalselt paigaldamistoimingut. Sammud 1. Joondage õhuke ODD-klamber optilise kettaseadme pesadega ja asetage see nendele. 2.
Kõlar Kõlari eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3. Eemaldage ventilaatori kanal. See ülesanne Järgmistel piltidel on näidatud kõlari asukoht ja kujutatud visuaalselt eemaldamistoimingut. Sammud 1. Eemaldage kõlarikaabel emaplaadil olevast pistmikust. 2. Eemaldage kõlarikaabel korpusel olevatest kaablisuunajatest. 3. Vajutage sakki ja libistage kõlar koos kaabliga korpuse pesast välja.
Sammud 1. Suruge kõlar korpusel olevasse pessa, kuni see klõpsuga kinnitub. 2. Juhtige kõlarikaabel läbi korpusel oleva kaablisuunaja. 3. Ühendage kõlari kaabel emaplaadi liidesega. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Toitenupp Toitenupu eemaldamine Eeltingimused 1. 2. 3. 4. Järgige protseduuri jaotises Enne arvuti sees toimetamist. Eemaldage külgkate. Eemaldage ventilaatori kanal. Eemaldage esiraam.
Sammud 1. Eemaldage toitenupu kaabel emaplaadil asuvast pistmikust. 2. Vajutage toitenupu peaosal olevaid vabastussakke ja suunake toitenupu kaabel arvuti korpuse esiküljelt välja. 3. Tõmmake toitenupu kaabel arvutist välja. Toitenupu paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud toitenupu asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Sisestage toitenupu kaabel arvuti esikülje kaudu pessa ja suruge toitenupu peaosa, kuni see klõpsuga korpuse külge kinnitub. 2. Ühendage toitenupu kaabel emaplaadil oleva pistmikuga. Järgmised sammud 1. 2. 3. 4. Paigaldage esiraam. Paigaldage ventilaatori kanal. Paigaldage külgkate. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Toiteplokk Toiteploki eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. 2. Eemaldage külgkate. 3.
Lahtivõtmine ja kokkupanek
Sammud 1. Seadke arvuti külili. 2. Ühendage toitekaablid emaplaadi küljest lahti ja eemaldage need korpusel olevatest kaablisuunajatest. 3. Eemaldage kolm kruvi (6–32), millega toiteplokk on raami külge kinnitatud. 4. Vajutage kinnitusklambrit ja libistage toiteplokki korpuse tagaküljest eemale. 5. Tõstke toiteplokk korpusest välja. Toiteploki paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist.
Lahtivõtmine ja kokkupanek
Sammud 1. Libistage toiteplokk korpusesse, kuni kinnitussakk klõpsuga kinnitub. 2. Paigaldage kolm kruvi (6–32), millega toiteplokk korpuse külge kinnitatakse. 3. Juhtige toitekaablid läbi korpusel olevate kaablisuunajate ja ühendage need emaplaadi vastavate pistmikega. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Sissetungilüliti Sissetungilüliti eemaldamine Eeltingimused 1.
Sammud 1. Eemaldage sissetungilüliti kaabel emaplaadil olevast pesast. 2. Libistage sissetungilülitit ja eemaldage see korpuse küljest. Sissetungilüliti paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud sissetungilüliti asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Sammud 1. Sisestage sissetungilüliti pessa ja libistage lülitit pessa kinnitamiseks. 2. Ühendage sissetungilüliti kaabel emaplaadil oleva pistmikuga. Järgmised sammud 1. Paigaldage ventilaatori kanal. 2. Paigaldage külgkate. 3. Järgige protseduuri jaotises Pärast arvuti sees toimetamist Valikulised I/O-moodulid (tüüp C / HDMI / VGA / DP / jada) Valikuliste I/O-moodulite (tüüp C / HDMI / VGA / DP / jada) eemaldamine Eeltingimused 1. 2. 3. 4. Järgige protseduuri jaotises Enne arvuti sees toimetamist.
Sammud 1. Eemaldage kaks kruvi (M3 × 3), millega valikuline I/O-moodul on arvuti korpuse külge kinnitatud. 2. Eemaldage I/O-mooduli kaabel emaplaadil olevast pistmikust. 3. Eemaldage I/O-moodul arvutist. Valikuliste I/O-moodulite (tüüp C/HDMI/VGA/DP/jada) paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud emaplaadi asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Lahtivõtmine ja kokkupanek 63
Lahtivõtmine ja kokkupanek
Sammud 1. Metallklambri imitatsiooni eemaldamiseks sisestage klambri avasse lamepea-kruvikeeraja, suruge vabastamiseks klambrit ja seejärel tõstke see arvutist välja. 2. Sisestage valikuline I/O-moodul (tüüp C/HDMI/VGA/DP/jada) arvuti seestpoolt mooduli pessa. 3. Ühendage I/O-mooduli kaabel emaplaadil oleva pistmikuga. 4. Paigaldage kaks kruvi (M3 × 3), et valikuline I/O-moodul emaplaadi külge kinnitada. Järgmised sammud 1. 2. 3. 4. Paigaldage ventilaatori kanal. Paigaldage esiraam. Paigaldage külgkate.
Emaplaat Emaplaadi eemaldamine Eeltingimused 1. Järgige protseduuri jaotises Enne arvuti sees toimetamist. MÄRKUS: Arvuti hooldussilt asub emaplaadi peal. Pärast emaplaadi paigaldust peate hooldussildi BIOS-i häälestusprogrammi sisestama. MÄRKUS: Emaplaadi vahetamisel kaovad kõik muudatused, mille olete BIOS-ile selle häälestusprogrammi abil teinud. Seega peate vajalikud muudatused pärast emaplaadi vahetust uuesti tegema. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Lahtivõtmine ja kokkupanek 67
Sammud 1. Eemaldage kaks (nr 6–32) kruvi, mis kinnitavad eesmise I/O-klambri korpuse külge. 2. Eemaldage I/O-klamber libistades korpuse küljest. 3. Ühendage kõik emaplaadiga ühendatud kaablid lahti. 4. Eemaldage M.2-kaardi kruvi (nr 6–32) ja kaheksa (nr 6–32) kruvi, mis kinnitavad emaplaadi korpuse külge.
5. Tõstke emaplaat nurga all üles ja eemaldage see korpuse küljest. Emaplaadi paigaldamine Eeltingimused Kui asendate komponenti, eemaldage olemasolev komponent enne protseduuri sooritamist. See ülesanne Järgmistel piltidel on näidatud emaplaadi asukoht ja kujutatud visuaalselt paigaldamistoimingut.
Lahtivõtmine ja kokkupanek
Sammud 1. Lükake emaplaadi eesmised I/O-pordid korpuse eesmistesse I/O-pesadesse ja asetage emaplaadi kruviaugud korpuse kruviaukudega kohakuti. 2. Emaplaadi kinnitamiseks korpusele paigaldage M.2-kaardi (nr 6–32) kruvi ja kaheksa (nr 6–32) kruvi. 3. Paigaldage ja ühendage kõik kaablid emaplaadi pistmikega.
4. Joondage eesmine I/O-klamber korpusel olevate pesadega. 5. Paigaldage kaks (nr 6–32) kruvi, et eesmine I/O-klamber korpuse külge kinnitada. Järgmised sammud 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Paigaldage protsessor. Paigaldage protsessori ventilaatori ja jahutusradiaatori koost. Paigaldage nööppatarei. Paigaldage graafikakaart / toitega GPU. Paigaldage M.2 2230 SSD / M.2 2280 SSD. Paigaldage WLAN-kaart. Paigaldage mälumoodul. Paigaldage ventilaatori kanal. Paigaldage esiraam. Paigaldage külgkate.
5 Tõrkeotsing Teemad: • • • • • Dell SupportAssisti algkäivituseelse süsteemi toimivuse kontrolli diagnostika Diagnostika LED-tule käitumine Diagnostilised tõrketeated Süsteemi tõrketeated Wi-Fi-toitetsükkel Dell SupportAssisti algkäivituseelse süsteemi toimivuse kontrolli diagnostika See ülesanne SupportAssisti tugidiagnostika (nimetatakse ka süsteemidiagnostikaks) teeb täieliku riistvarakontrolli.
Diagnostika LED-tule käitumine Tabel 7. Diagnostika LED-tule käitumine Vilkuv muster Merevaigukollane Valge Rikke kirjeldus 1 2 Taastamatu SPI-välkmälu rike 2 1 CPU rike Soovitatud lahendus ● ● 2 2 Emaplaadi rike (hõlmab BIOS-i ● riket või ROM-i tõrget) ● 2 3 Ei leitud mälu/RAM-i ● ● Minge tagasi viimase BIOS-i versiooni juurde Kui probleem kordub, vahetage emaplaat välja. Veenduge, et mälumoodul oleks õigesti paigaldatud. Kui probleem kordub, vahetage mälumoodul välja.
Tabel 7. Diagnostika LED-tule käitumine (jätkub) Vilkuv muster Merevaigukollane Valge 3 6 Rikke kirjeldus SBIOS-i välkmälu rike Soovitatud lahendus ● Kui probleem kordub, vahetage emaplaat välja. ● SBIOS-i tuvastatud välkmälu rike Kui probleem kordub, vahetage emaplaat välja. ● 3 7 Intel ME (Management Engine) tõrge ● ● 4 2 ME-l ootab ajalõpp, et vastata HECI-sõnumile Kui probleem kordub, vahetage emaplaat välja. Protsessori toitekaabli ühenduse probleem Diagnostilised tõrketeated Tabel 8.
Tabel 8. Diagnostilised tõrketeated (jätkub) Tõrketeated Kirjeldus GENERAL FAILURE Operatsioonisüsteem ei suuda käsklust täita. Sellele sõnumile järgneb tavaliselt konkreetne teave. Näiteks Printer out of paper. Take the appropriate action. (Printeril on paber otsas. Tehke vajalik toiming.) HARD-DISK DRIVE CONFIGURATION ERROR Arvuti ei tuvasta ketta tüüpi. Lülitage arvuti välja, eemaldage kõvaketas ja tehke arvuti algkäivitus optiliselt kettalt.
Tabel 8. Diagnostilised tõrketeated (jätkub) Tõrketeated Kirjeldus MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE Mõni mälumoodul võib olla rikkis või valesti paigas. Paigaldage mälumoodul uuesti või asendage see vajaduse korral. MEMORY ALLOCATION ERROR Tarkvara, mida püüate käivitada, on operatsioonisüsteemi, teise programmi või utiliidiga konfliktis. Lülitage arvuti välja, oodake 30 sekundit ja siis taaskäivitage see. Käivitage programm uuesti.
Tabel 8. Diagnostilised tõrketeated (jätkub) Tõrketeated Kirjeldus TIMER CHIP COUNTER 2 FAILED Emaplaadil võib mõne kiibi töö häiritud olla. Käivitage testid System Set (Süsteemi komplekt) jaotises Dell Diagnostics (Delli diagnostika). UNEXPECTED INTERRUPT IN PROTECTED MODE Klaviatuuri kontrolleri talitlus võib olla häiritud või mälumoodul võib olla lahti.
Wi-Fi-toitetsükkel See ülesanne Kui teie arvutil puudub Wi-Fi-ühenduse probleemide tõttu ligipääs internetile, võib teha Wi-Fi-toitetsükli protseduuri. Järgmine protseduur annab juhised Wi-Fi-toitetsükli tegemiseks. MÄRKUS: Mõni internetiteenuse pakkuja ehk ISP (Internet Service Provider) pakub kombineeritud modemi/ruuteri seadet. Sammud 1. Lülitage arvuti sisse. 2. Lülitage modem välja. 3. Lülitage traadita ruuter välja. 4. Oodake 30 sekundit. 5. Lülitage traadita ruuter sisse. 6. Lülitage modem sisse. 7.
6 Abi saamine Teemad: • Delli kontaktteave Delli kontaktteave Eeltingimused MÄRKUS: Kui teil pole aktiivset Interneti-ühendust, võite leida kontaktteavet oma ostuarvelt, saatelehelt, tšekilt või Delli tootekataloogist. See ülesanne Dell pakub mitut veebi- ja telefonipõhist toe- ning teenindusvõimalust. Saadavus võib riigi ja toote järgi erineda ning mõned teenused ei pruugi olla teie piirkonnas saadaval. Delliga müügi, tehnilise toe või klienditeeninduse küsimustes ühenduse võtmiseks: Sammud 1.