OptiPlex 3080 Tower Service Manual Regulatory Model: D29M Regulatory Type: D29M002 May 2020 Rev.
Σημείωση, προσοχή και προειδοποίηση ΣΗΜΕΙΩΣΗ: Η ΣΗΜΕΙΩΣΗ υποδεικνύει σημαντικές πληροφορίες που σας βοηθούν να χρησιμοποιείτε καλύτερα το προϊόν σας. ΠΡΟΣΟΧΗ: Η ΠΡΟΣΟΧΗ υποδεικνύει είτε ενδεχόμενη ζημιά στο υλισμικό είτε απώλεια δεδομένων και σας ενημερώνει για τον τρόπο με τον οποίο μπορείτε να αποφύγετε το πρόβλημα. ΠΡΟΕΙΔΟΠΟΙΗΣΗ: Η ΠΡΟΕΙΔΟΠΟΙΗΣΗ υποδεικνύει ότι υπάρχει το ενδεχόμενο να προκληθεί υλική ζημιά, τραυματισμός ή θάνατος. © 2020 Dell Inc. ή οι θυγατρικές της. Με επιφύλαξη παντός δικαιώματος.
Contents Chapter 1: Εκτέλεση εργασιών στον υπολογιστή σας................................................................... 6 Οδηγίες ασφαλείας............................................................................................................................................................ 6 Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας....................................................... 7 Προφυλάξεις ασφάλειας...................................................................
Αφαίρεση των μονάδων μνήμης........................................................................................................................... 36 Εγκατάσταση των μονάδων μνήμης.................................................................................................................... 37 Διάταξη ανεμιστήρα και ψύκτρας επεξεργαστή......................................................................................................
Διαγνωστικά μηνύματα σφαλμάτων........................................................................................................................... 79 Μηνύματα σφαλμάτων συστήματος...........................................................................................................................83 Απενεργοποίηση και ενεργοποίηση του Wi-Fi.........................................................................................................84 Chapter 6: Λήψη βοήθειας...........................
1 Εκτέλεση εργασιών στον υπολογιστή σας Θέματα: • Οδηγίες ασφαλείας Οδηγίες ασφαλείας Για να προστατεύσετε τον υπολογιστή σας από πιθανή ζημιά και να διασφαλίσετε την ατομική σας προστασία, ακολουθήστε τις παρακάτω οδηγίες για θέματα ασφάλειας. Αν δεν αναφέρεται διαφορετικά, για κάθε διαδικασία που περιλαμβάνεται στο παρόν έγγραφο θεωρείται δεδομένο ότι έχετε διαβάσει τις πληροφορίες ασφαλείας που συνοδεύουν τον υπολογιστή.
Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας Πληροφορίες γι αυτήν την εργασία ΣΗΜΕΙΩΣΗ: Οι εικόνες που θα βρείτε στο έγγραφο ενδέχεται να διαφέρουν από τον υπολογιστή σας, πράγμα που εξαρτάται από τη διαμόρφωση που παραγγείλατε. Βήματα 1. Αποθηκεύστε και κλείστε όλα τα ανοιχτά αρχεία και τερματίστε όλες τις ανοιχτές εφαρμογές. 2. Τερματίστε τη λειτουργία του υπολογιστή σας. Επιλέξτε Start > Power > Shut down.
Προστασία από ηλεκτροστατική εκκένωση—Αντιστατική προστασία (ESD) Η ηλεκτροστατική εκκένωση αποτελεί σημαντικό λόγο ανησυχίας κατά τον χειρισμό ηλεκτρονικών εξαρτημάτων, ιδίως ευαίσθητων εξαρτημάτων, όπως κάρτες επέκτασης, επεξεργαστές, μονάδες μνήμης DIMM και πλακέτες συστήματος. Πολύ μικρά φορτία μπορεί να προκαλέσουν βλάβη στα κυκλώματα με μη εμφανή τρόπο, όπως περιοδικά προβλήματα ή μειωμένη διάρκεια ζωής προϊόντος.
● ● ● ● ● φυσική σύνδεση του περικάρπιου και του καλωδίου πρόσδεσης με το δέρμα σας, το αντιστατικό στρώμα και το υλικό καλείται πρόσδεση. Να χρησιμοποιείτε μόνο κιτ επιτόπου εξυπηρέτησης με περικάρπιο, στρώμα και καλώδιο πρόσδεσης. Μην χρησιμοποιείτε περικάρπια χωρίς καλώδιο. Έχετε υπόψη ότι τα εσωτερικά καλώδια του περικάρπιου είναι επιρρεπή σε βλάβες λόγω φυσιολογικής φθοράς.
4. Συνδέστε τον υπολογιστή σας και όλες τις προσαρτημένες συσκευές στις αντίστοιχες πρίζες. 5. Ενεργοποιήστε τον υπολογιστή σας.
2 Τεχνολογία και εξαρτήματα Αυτό το κεφάλαιο περιγράφει την τεχνολογία και τα εξαρτήματα που διαθέτει το σύστημα. Θέματα: • • Επιλογές γραφικών Δυνατότητες διαχείρισης συστήματος Επιλογές γραφικών Intel UHD 610 Graphics Πίνακας 1.
Πίνακας 2. Προδιαγραφές Intel UHD 630 Graphics (συνεχίζεται) Intel UHD 630 Graphics Επίπεδα επικάλυψης Ναι Υποστήριξη API κάρτας γραφικών/βίντεο λειτουργικών συστημάτων DirectX 12, OpenGL (4,5 από Intel CML POR) Υποστηρίζει μέγιστη ανάλυση ● DP: 4.096 x 2.304 στα 60 Hz, 24 bpp ● Προαιρετικό DP: 4.096 x 2.304 στα 60 Hz ● Προαιρετικό USB type-C με εναλλακτική λειτουργία: 4.096 x 2.304 στα 60 Hz ● Προαιρετική VGA: 1.920 x 1.200 στα 60 Hz ● Προαιρετικό HDMI2.0: 4.096 x 2.
Πίνακας 3. Προδιαγραφές NVIDIA GeForce GT 730 (συνεχίζεται) Δυνατότητα Τιμές Συντελεστής μορφής βάσης στήριξης Χαμηλό προφίλ Μέγιστη ανάλυση 3.840 x 2.160 Κατανάλωση ισχύος u ● 20 W TDP 30 W TGP Απόδοση σήμανσης 3D ● 3DMark 11 (P): E4131 ● 3Dmark Vantage(P): AMD Radeon RX 640 Πίνακας 4. Προδιαγραφές AMD Radeon RX 640 Δυνατότητα Τιμές Συχνότητα GPU 1,2 GHz DirectX 12 Μοντέλο Shader 5,0 Open CL 2,0 Open GL 4,5 Διασύνδεση μνήμης GPU 128 bit Αρτηρία PCIe PCIe 3.
AMD Radeon R5 430 Πίνακας 5. Προδιαγραφές AMD Radeon R5 430 Δυνατότητα Τιμές Συχνότητα GPU 780 MHz DirectX 11,2 Μοντέλο Shader 5,0 Open CL 1,2 Open GL 4,2 Διασύνδεση μνήμης GPU 64 bit Αρτηρία PCIe PCIe 3.0 x8 Υποστήριξη οθόνης 1 DisplayPort 1.
Dell Client Command Suite για διαχείριση συστημάτων εντός εύρους ζώνης Dell Client Command Suite - Μια δωρεάν εργαλειοθήκη διαθέσιμη για λήψη για όλα τα tablet Latitude Rugged στην τοποθεσία dell.com/support. Αυτοματοποιεί και απλοποιεί τις εργασίες διαχείρισης συστημάτων, εξοικονομώντας χρόνο, χρήμα και πόρους. Αποτελείται από τις παρακάτω μονάδες που μπορούν να χρησιμοποιηθούν ανεξάρτητα ή με διάφορες κονσόλες διαχείρισης συστημάτων όπως είναι η SCCM.
3 16 Κύρια στοιχεία του συστήματός σας
Κύρια στοιχεία του συστήματός σας Κύρια στοιχεία του συστήματός σας 17
ΣΗΜΕΙΩΣΗ: Η Dell παρέχει μια λίστα με τα στοιχεία και τους κωδικούς εξαρτημάτων για την αρχική διαμόρφωση συστήματος που αγοράσατε. Τα εξαρτήματα αυτά διατίθενται σύμφωνα με τις καλύψεις εντός εγγύησης που αγοράζει ο πελάτης. Για τις επιλογές αγοράς επικοινωνήστε τον αντιπρόσωπο πωλήσεων της Dell.
4 Αποσυναρμολόγηση και επανασυναρμολόγηση Θέματα: • • • • • • • • • • • • • • • • • • • • • Πλευρικό κάλυμμα Μπροστινή πρόσοψη Αεραγωγός ανεμιστήρα Διάταξη σκληρού δίσκου Σκληρός δίσκος 3,5 ιντσών Μονάδα δίσκου στερεάς κατάστασης Μονάδες μνήμης Διάταξη ανεμιστήρα και ψύκτρας επεξεργαστή Επεξεργαστής Κάρτα γραφικών Μονάδα επεξεργασίας γραφικών Μπαταρία σε σχήμα νομίσματος Κάρτα WLAN Λεπτή μονάδα οπτικού δίσκου Υποστήριγμα λεπτής μονάδας οπτικού δίσκου Ηχείο Κουμπί λειτουργίας Μονάδα τροφοδοτικού Διακόπτη επ
Βήματα 1. Ξεσφίξτε τη χειρόβιδα (#6-32) που συγκρατεί το πλευρικό κάλυμμα στον υπολογιστή. 2. Σύρετε το πλευρικό κάλυμμα προς το πίσω μέρος του υπολογιστή και ανασηκώστε το για να το αφαιρέσετε από τον υπολογιστή.
Εγκατάσταση του πλευρικού καλύμματος Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης. Πληροφορίες γι αυτήν την εργασία Στην παρακάτω εικόνα υποδεικνύεται η θέση του πλευρικού καλύμματος και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης.
Βήματα 1. Εντοπίστε την υποδοχή του πλευρικού καλύμματος στον υπολογιστή σας. 2. Ευθυγραμμίστε τις γλωττίδες στο πλευρικό κάλυμμα με τις υποδοχές στο περίβλημα. 3. Σύρετε το πλευρικό κάλυμμα προς την μπροστινή πλευρά του υπολογιστή για να το εγκαταστήσετε. 4. Επανατοποθετήστε τη χειρόβιδα (#6-32) για να στερεώσετε το πλευρικό κάλυμμα στον υπολογιστή. Επόμενα βήματα 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Μετά την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας.
Βήματα 1. Ξεσφηνώστε τις γλωττίδες συγκράτησης για να αποδεσμεύσετε την μπροστινή πρόσοψη από τον υπολογιστή. 2. Τραβήξτε απαλά την μπροστινή πρόσοψη και περιστρέψτε απαλά για να απελευθερώσετε τις άλλες γλωττίδες στην πρόσοψη από τις υποδοχές στο περίβλημα του υπολογιστή. 3. Αφαιρέστε την μπροστινή πρόσοψη από τον υπολογιστή. Εγκατάσταση της μπροστινής πρόσοψης Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Αεραγωγός ανεμιστήρα Αφαίρεση του αεραγωγού του ανεμιστήρα Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του αεραγωγού του ανεμιστήρα και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1.
Πληροφορίες γι αυτήν την εργασία Στην παρακάτω εικόνα υποδεικνύεται η θέση του αεραγωγού του ανεμιστήρα και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Τοποθετήστε τον αεραγωγό του ανεμιστήρα για να τον ευθυγραμμίσετε με τις εγκοπές στο περίβλημα του υπολογιστή. 2. Πιέστε τον αεραγωγό του ανεμιστήρα μέχρι να κουμπώσει στη θέση του και να ακουστεί το χαρακτηριστικό κλικ. Επόμενα βήματα 1. Εγκαταστήστε το πλευρικό κάλυμμα. 2.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της διάταξης μονάδας σκληρού δίσκου 2,5 ιντσών και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1. Αποσυνδέστε τα καλώδια δεδομένων και τροφοδοσίας του σκληρού δίσκου από τις υποδοχές στη μονάδα σκληρού δίσκου 2,5 ιντσών. 2. Πιέστε τις γλωττίδες απασφάλισης και στις δύο πλευρές της βάσης στήριξης της μονάδας σκληρού δίσκου για να την απελευθερώσετε από τις υποδοχές στο περίβλημα του υπολογιστή. 3.
Αφαίρεση της βάσης στήριξης μονάδας σκληρού δίσκου 2,5 ιντσών Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. 4. Αφαιρέστε τη διάταξη σκληρού δίσκου 2,5 ιντσών.
3. Αφαιρέστε τις δύο βίδες (M3x3,5) που συγκρατούν τη δεύτερη μονάδα σκληρού δίσκου στη μεταλλική βάση στήριξης μονάδας σκληρού δίσκου. 4. Σύρετε και ανασηκώστε τη δεύτερη μονάδα σκληρού δίσκου από τη μεταλλική βάση στήριξης. Εγκατάσταση της βάσης στήριξης της μονάδας σκληρού δίσκου 2,5 ιντσών Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
2. Επανατοποθετήστε τις δύο βίδες (M3x3,5) για να στερεώσετε την πρώτη μονάδα σκληρού δίσκου στη μεταλλική βάση στήριξης μονάδας σκληρού δίσκου. 3. Τοποθετήστε τη δεύτερη μονάδα σκληρού δίσκου μέσα στη μεταλλική βάση στήριξης και ευθυγραμμίστε τις υποδοχές της βάσης στήριξης με τις υποδοχές στη μονάδα σκληρού δίσκου. 4. Επανατοποθετήστε τις δύο βίδες (M3x3,5) για να στερεώσετε τη δεύτερη μονάδα σκληρού δίσκου στη μεταλλική βάση στήριξης μονάδας σκληρού δίσκου. Επόμενα βήματα 1. 2. 3. 4.
Βήματα 1. Ευθυγραμμίστε τη διάταξη του σκληρού δίσκου υπό γωνία με την υποδοχή στον υπολογιστή. 2. Πιέστε τις γλωττίδες απασφάλισης της βάσης στήριξης μονάδας σκληρού δίσκου και ευθυγραμμίστε ελαφρώς προς τα πίσω για να τοποθετήσετε τη διάταξη μονάδας σκληρού δίσκου στην υποδοχή στο περίβλημα του υπολογιστή. 3. Συνδέστε το καλώδιο δεδομένων και το καλώδιο τροφοδοσίας του σκληρού δίσκου στις υποδοχές στη μονάδα σκληρού δίσκου 2,5 ιντσών. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2.
Σκληρός δίσκος 3,5 ιντσών Αφαίρεση του σκληρού δίσκου 3,5 ιντσών Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του σκληρού δίσκου 3,5 ιντσών και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του σκληρού δίσκου 3,5 ιντσών και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Ευθυγραμμίστε και τοποθετήστε τον σκληρό δίσκο 3,5 ιντσών μέσα στην υποδοχή στο περίβλημα. 2. Κρατήστε τον σκληρό δίσκο στο περίβλημα και επανατοποθετήστε τις τέσσερις βίδες (#6-32) για να ασφαλίσετε τον σκληρό δίσκο στο περίβλημα του υπολογιστή. 3. Συνδέστε το καλώδιο τροφοδοσίας και το καλώδιο δεδομένων στον σκληρό δίσκο.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της μονάδας δίσκου στερεάς κατάστασης και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1. Αφαιρέστε τη βίδα (M2x3.5) που συγκρατεί τη μονάδα δίσκου στερεάς κατάστασης στην πλακέτα συστήματος. 2. Σύρετε και σηκώστε τη μονάδα δίσκου στερεάς κατάστασης για να την αφαιρέσετε από την πλακέτα συστήματος. Εγκατάσταση της μονάδας δίσκου στερεάς κατάστασης M.
Βήματα 1. Ευθυγραμμίστε την εγκοπή στη μονάδα δίσκου στερεάς κατάστασης με τη γλωττίδα στην υποδοχή της μονάδας. 2. Εισαγάγετε τη μονάδα δίσκου στερεάς κατάστασης με κλίση 45 μοιρών στην υποδοχή στην πλακέτα συστήματος. 3. Επανατοποθετήστε τη βίδα (M2x3,5) για να ασφαλίσετε τη μονάδα δίσκου στερεάς κατάστασης M.2 2230 στην πλακέτα συστήματος. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3.
Βήματα 1. Αφαιρέστε τη βίδα (M2x3.5) που συγκρατεί τη μονάδα δίσκου στερεάς κατάστασης στην πλακέτα συστήματος. 2. Σύρετε και σηκώστε τη μονάδα δίσκου στερεάς κατάστασης για να την αφαιρέσετε από την πλακέτα συστήματος. Εγκατάσταση της μονάδας δίσκου στερεάς κατάστασης M.2 2280 PCIe Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Βήματα 1. Ευθυγραμμίστε την εγκοπή στη μονάδα δίσκου στερεάς κατάστασης με τη γλωττίδα στην υποδοχή της μονάδας. 2. Εισαγάγετε τη μονάδα δίσκου στερεάς κατάστασης με κλίση 45 μοιρών στην υποδοχή στην πλακέτα συστήματος. 3. Επανατοποθετήστε τη βίδα (M2x3,5) για να ασφαλίσετε τη μονάδα δίσκου στερεάς κατάστασης M.2 2280 στην πλακέτα συστήματος. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3.
Βήματα 1. Τραβήξτε τα κλιπ συγκράτησης και στις δύο πλευρές της μονάδας μνήμης, μέχρι η μονάδα μνήμης να αναπηδήσει προς τα πάνω. 2. Μετακινήστε συρτά τη μονάδα μνήμης και αφαιρέστε την από την υποδοχή της. Εγκατάσταση των μονάδων μνήμης Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Βήματα 1. Ευθυγραμμίστε την εγκοπή στη μονάδα μνήμης με τη γλωττίδα στην υποδοχή της μονάδας. 2. Περάστε σταθερά, συρτά και γυρτά τη μονάδα μνήμης μέσα στην υποδοχή και πιέστε την προς τα κάτω τόσο ώστε να κουμπώσει στη σωστή της θέση και να ακουστεί το χαρακτηριστικό κλικ. ΣΗΜΕΙΩΣΗ: Αν δεν ακουστεί το χαρακτηριστικό κλικ, αφαιρέστε τη μονάδα μνήμης και εγκαταστήστε την ξανά. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3.
ΠΡΟΣΟΧΗ: Για να επιτευχθεί η μέγιστη ψύξη του επεξεργαστή, μην αγγίζετε τις περιοχές μεταφοράς θερμότητας επάνω στην ψύκτρα. Το λίπος της επιδερμίδας σας μπορεί να μειώσει την ικανότητα μεταφοράς θερμότητας της θερμοαγώγιμης πάστας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του ανεμιστήρα και της ψύκτρας του επεξεργαστή και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1.
Πληροφορίες γι αυτήν την εργασία Στην παρακάτω εικόνα υποδεικνύεται η θέση της διάταξης του ανεμιστήρα και της ψύκτρας του επεξεργαστή και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Ευθυγραμμίστε τις οπές για τις βίδες στη διάταξη ανεμιστήρα και ψύκτρας του επεξεργαστή με τις αντίστοιχες οπές στην πλακέτα συστήματος. 2. Σφίξτε τις τέσσερις μη αποσπώμενες βίδες που συγκρατούν τη διάταξη ανεμιστήρα και ψύκτρας του επεξεργαστή στην πλακέτα συστήματος. 3.
3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. 4. Αφαιρέστε τη διάταξη ανεμιστήρα και ψύκτρας του επεξεργαστή. ΣΗΜΕΙΩΣΗ: Μετά τον τερματισμό λειτουργίας του υπολογιστή ο επεξεργαστής μπορεί να εξακολουθεί να είναι ζεστός. Αφήστε τον να κρυώσει προτού τον αφαιρέσετε. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του επεξεργαστή και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1.
Εγκατάσταση του επεξεργαστή Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης. Πληροφορίες γι αυτήν την εργασία Η παρακάτω εικόνα υποδεικνύει τη θέση του επεξεργαστή και παρέχει μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Βεβαιωθείτε ότι ο μοχλός αποδέσμευσης στην υποδοχή του επεξεργαστή είναι τραβηγμένος ως το τέρμα στη θέση ανοίγματος. 2.
3. Αφού ο επεξεργαστής εφαρμόσει πλήρως στην υποδοχή, περιστρέψτε τον μοχλό συγκράτησης προς τα κάτω και τοποθετήστε τον κάτω από την γλωττίδα του καλύμματος του επεξεργαστή. Επόμενα βήματα 1. 2. 3. 4. Εγκαταστήστε τη διάταξη του ανεμιστήρα και της ψύκτρας του επεξεργαστή. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. Εγκαταστήστε το πλευρικό κάλυμμα. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Μετά την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας.
Βήματα 1. Εντοπίστε την κάρτα γραφικών (PCI-Express). 2. Ανασηκώστε τη συρόμενη γλωττίδα για να ανοίξετε τη θύρα PCIe. 3. Σπρώξτε και κρατήστε τη γλωττίδα συγκράτησης πάνω στην υποδοχή της κάρτας γραφικών και σηκώστε την κάρτα γραφικών από την υποδοχή της. Εγκατάσταση της κάρτας γραφικών Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Βήματα 1. Ευθυγραμμίστε την κάρτα γραφικών με τον σύνδεσμο της κάρτας PCI-Express στην πλακέτα συστήματος. 2. Χρησιμοποιώντας το σημείο ευθυγράμμισης, συνδέστε την κάρτα γραφικών στην υποδοχή και πιέστε σταθερά προς τα κάτω. Σιγουρευτείτε ότι η κάρτα είναι καλά στερεωμένη στη θέση της. 3. Ανασηκώστε τη συρόμενη γλωττίδα για να κλείσετε τη θύρα PCIe. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3.
Μονάδα επεξεργασίας γραφικών Αφαίρεση της τροφοδοτούμενης GPU Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της τροφοδοτούμενης μονάδας επεξεργασίας γραφικών και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1.
Μπαταρία σε σχήμα νομίσματος Αφαίρεση της μπαταρίας σε σχήμα νομίσματος Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα. 4. Αφαιρέστε την τροφοδοτούμενη GPU. ΣΗΜΕΙΩΣΗ: Αυτό το βήμα απαιτείται μόνο εάν το σύστημα έχει διαμορφωθεί με τροφοδοτούμενη GPU.
Βήματα 1. Εισαγάγετε την μπαταρία σε σχήμα νομίσματος με το σύμβολο "+" στραμμένο προς τα πάνω και σύρετέ την κάτω από τις γλωττίδες ασφάλισης στην πλευρά του θετικού πόλου στην υποδοχή. 2. Πιέστε την μπαταρία μέσα στον σύνδεσμο τόσο ώστε να ασφαλίσει στη σωστή θέση. Επόμενα βήματα 1. Εγκαταστήστε την τροφοδοτούμενη GPU. ΣΗΜΕΙΩΣΗ: Αυτό το βήμα απαιτείται μόνο εάν το σύστημα έχει διαμορφωθεί με τροφοδοτούμενη GPU. 2. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 3. Εγκαταστήστε το πλευρικό κάλυμμα. 4.
Βήματα 1. Αφαιρέστε τη βίδα (M2x3,5) που συγκρατεί την κάρτα WLAN στην πλακέτα συστήματος. 2. Αφαιρέστε τη βάση στήριξης της κάρτας WLAN από την κάρτα WLAN. 3. Αποσυνδέστε τα καλώδια της κεραίας από την κάρτα WLAN. 4. Σύρετε και αφαιρέστε την κάρτα WLAN από την υποδοχή στην πλακέτα συστήματος. Εγκατάσταση της κάρτας WLAN Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Βήματα 1. Συνδέστε τα καλώδια της κεραίας στην κάρτα WLAN. Στον πίνακα που ακολουθεί παρατίθεται η χρωματική κωδικοποίηση των καλωδίων των κεραιών για την κάρτα WLAN του υπολογιστή σας. Πίνακας 6. Χρωματική κωδικοποίηση καλωδίων κεραίας Σύνδεσμοι στην κάρτα ασύρματης επικοινωνίας Χρώμα καλωδίου κεραίας Κύριος (λευκό τρίγωνο) Λευκό Βοηθητικός (μαύρο τρίγωνο) Μαύρο 2. Τοποθετήστε τη βάση στήριξης της κάρτας WLAN για να στερεώσετε τα καλώδια της κεραίας WLAN. 3.
4. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Μετά την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. Λεπτή μονάδα οπτικού δίσκου Αφαίρεση της λεπτής μονάδας οπτικού δίσκου Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. 2. Αφαιρέστε το πλευρικό κάλυμμα. 3. Αφαιρέστε τον αεραγωγό του ανεμιστήρα.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της λεπτής μονάδας οπτικού δίσκου και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Τοποθετήστε τη διάταξη της λεπτής μονάδας οπτικού δίσκου στην υποδοχή της μονάδας οπτικού δίσκου. 2. Σύρετε τη διάταξη της λεπτής μονάδας οπτικού δίσκου μέχρι να κουμπώσει στη θέση της. 3. Περάστε τα καλώδια τροφοδοσίας και δεδομένων μέσα από τους οδηγούς δρομολόγησης και συνδέστε τα στη λεπτή μονάδα οπτικού δίσκου.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της βάσης στήριξης της λεπτής μονάδας οπτικού δίσκου και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1. Ξεσφηνώστε τη βάση στήριξης της λεπτής μονάδας οπτικού δίσκου και αφαιρέστε την από την υποδοχή στη μονάδα οπτικού δίσκου. 2. Αφαιρέστε τη βάση στήριξης της λεπτής μονάδας οπτικού δίσκου από τη μονάδα οπτικού δίσκου.
2. Κουμπώστε τη βάση στήριξης της λεπτής μονάδας οπτικού δίσκου στη λεπτή μονάδα οπτικού δίσκου. Επόμενα βήματα 1. 2. 3. 4. Εγκαταστήστε τη λεπτή μονάδα οπτικού δίσκου. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. Εγκαταστήστε το πλευρικό κάλυμμα. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Μετά την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. Ηχείο Αφαίρεση του ηχείου Προϋποθέσεις 1.
Εγκατάσταση του ηχείου Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης. Πληροφορίες γι αυτήν την εργασία Στην παρακάτω εικόνα υποδεικνύεται η θέση του ηχείου και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης. Βήματα 1. Πιέστε και σύρετε το ηχείο μέσα στην υποδοχή στο περίβλημα μέχρι να κουμπώσει στη θέση του. 2. Περάστε το καλώδιο των ηχείων μέσα από τον οδηγό δρομολόγησης στο περίβλημα. 3.
4. Αφαιρέστε την μπροστινή πρόσοψη. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του κουμπιού λειτουργίας και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1. Αποσυνδέστε το καλώδιο του κουμπιού λειτουργίας από τον σύνδεσμο στην πλακέτα συστήματος. 2. Πιέστε τις γλωττίδες απασφάλισης στην κεφαλή του κουμπιού λειτουργίας και σύρετε το καλώδιο του κουμπιού λειτουργίας για να το αφαιρέσετε από το μπροστινό περίβλημα του υπολογιστή. 3.
Βήματα 1. Τοποθετήστε το καλώδιο του κουμπιού λειτουργίας στην υποδοχή στην μπροστινή πλευρά του υπολογιστή και πιέστε την κεφαλή του κουμπιού λειτουργίας μέχρι να κουμπώσει στη θέση του στο περίβλημα και να ακουστεί το χαρακτηριστικό κλικ. 2. Ευθυγραμμίστε και συνδέστε το καλώδιο του κουμπιού λειτουργίας στην υποδοχή στην πλακέτα συστήματος. Επόμενα βήματα 1. 2. 3. 4. Εγκαταστήστε την μπροστινή πρόσοψη. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. Εγκαταστήστε το πλευρικό κάλυμμα.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση της μονάδας του τροφοδοτικού και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης.
Βήματα 1. Ακουμπήστε τον υπολογιστή στη δεξιά πλευρά. 2. Αποσυνδέστε τα καλώδια τροφοδοσίας από την πλακέτα συστήματος και αφαιρέστε τα από τους οδηγούς δρομολόγησης πάνω στο περίβλημα. 3. Αφαιρέστε τις τρεις βίδες (#6-32) που συγκρατούν τη μονάδα του τροφοδοτικού στο περίβλημα. 4. Πιέστε τον συνδετήρα συγκράτησης και σύρετε τη μονάδα τροφοδοτικού μακριά από το περίβλημα. 5. Σηκώστε τη μονάδα του τροφοδοτικού για να την αφαιρέσετε από το περίβλημα.
Αποσυναρμολόγηση και επανασυναρμολόγηση
Βήματα 1. Σύρετε τη μονάδα του τροφοδοτικού μέσα στο περίβλημα, μέχρι η γλωττίδα συγκράτησης να κουμπώσει στη θέση της. 2. Επανατοποθετήστε τις τρεις βίδες (#6-32) για να ασφαλίσετε τη μονάδα του τροφοδοτικού στο περίβλημα. 3. Περάστε το καλώδιο τροφοδοσίας μέσα στους οδηγούς δρομολόγησης στο περίβλημα και συνδέστε τα καλώδια τροφοδοσίας στους αντίστοιχους συνδέσμους στην πλακέτα συστήματος. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3.
Βήματα 1. Αποσυνδέστε το καλώδιο του διακόπτη επισύνδεσης από την υποδοχή στην πλακέτα συστήματος 2. Σύρετε και αφαιρέστε τον διακόπτη επισύνδεσης από το περίβλημα. Εγκατάσταση του διακόπτη επισύνδεσης Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης. Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση του διακόπτη επισύνδεσης και παρέχεται μια οπτική αναπαράσταση της διαδικασίας εγκατάστασης.
Βήματα 1. Τοποθετήστε τον διακόπτη επισύνδεσης στην υποδοχή του και σύρετε τον διακόπτη για να τον ασφαλίσετε στην υποδοχή. 2. Συνδέστε το καλώδιο του διακόπτη επισύνδεσης στην υποδοχή στην πλακέτα συστήματος. Επόμενα βήματα 1. Εγκαταστήστε τον αεραγωγό του ανεμιστήρα. 2. Εγκαταστήστε το πλευρικό κάλυμμα. 3. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Μετά την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας.
Πληροφορίες γι αυτήν την εργασία Στις παρακάτω εικόνες υποδεικνύεται η θέση των προαιρετικών μονάδων εισόδου/εξόδου και παρέχεται μια οπτική αναπαράσταση της διαδικασίας αφαίρεσης. Βήματα 1. Αφαιρέστε τις δύο βίδες (M3X3) που συγκρατούν την προαιρετική μονάδα εισόδου/εξόδου στο περίβλημα του υπολογιστή. 2. Αποσυνδέστε το καλώδιο της μονάδας εισόδου/εξόδου από την υποδοχή του στην πλακέτα συστήματος. 3. Αφαιρέστε τη μονάδα εισόδου/εξόδου από τον υπολογιστή.
Αποσυναρμολόγηση και επανασυναρμολόγηση 65
Αποσυναρμολόγηση και επανασυναρμολόγηση
Αποσυναρμολόγηση και επανασυναρμολόγηση 67
Βήματα 1. Για να αφαιρέσετε το ομοίωμα μεταλλικής βάσης στήριξης, τοποθετήστε ένα κατσαβίδι με επίπεδη μύτη στην οπή της βάσης στήριξης, πιέστε τη βάση στήριξης για να την αποδεσμεύσετε και, στη συνέχεια, ανασηκώστε τη βάση στήριξης και αφαιρέστε την από το σύστημα. 2. Τοποθετήστε την προαιρετική μονάδα εισόδου/εξόδου (Type-C/HDMI/VGA/DP/Σειριακή) στην υποδοχή της από το εσωτερικό του υπολογιστή σας. 3. Συνδέστε το καλώδιο εισόδου/εξόδου στην υποδοχή του στην πλακέτα συστήματος. 4.
Πλακέτα συστήματος Αφαίρεση της πλακέτας συστήματος Προϋποθέσεις 1. Ακολουθήστε τη διαδικασία που παρατίθεται στην ενότητα Πριν από την εκτέλεση εργασιών στο εσωτερικό του υπολογιστή σας. ΣΗΜΕΙΩΣΗ: Η ετικέτα εξυπηρέτησης του υπολογιστή σας είναι αποθηκευμένη στην πλακέτα συστήματος. Αφού επανατοποθετήσετε την πλακέτα συστήματος, πρέπει να καταχωρίσετε την ετικέτα εξυπηρέτησης στο πρόγραμμα ρύθμισης του BIOS.
Αποσυναρμολόγηση και επανασυναρμολόγηση
Βήματα 1. Αφαιρέστε τις δύο βίδες (#6-32) που συγκρατούν την μπροστινή βάση στήριξης πλακέτας εισόδου/εξόδου στο περίβλημα. 2. Σύρετε και αφαιρέστε τη μπροστινή βάση στήριξης εισόδου/εξόδου από το περίβλημα. 3. Αποσυνδέστε όλα τα καλώδια που είναι συνδεδεμένα στην πλακέτα συστήματος.
4. Αφαιρέστε τη μία βίδα της προεξοχής στήριξης κάρτας M.2 (#6-32) και τις οκτώ βίδες (#6-32) που συγκρατούν την πλακέτα συστήματος στο περίβλημα. 5. Ανασηκώστε υπό γωνία την πλακέτα συστήματος και αφαιρέστε την από το περίβλημα. Εγκατάσταση της πλακέτας συστήματος Προϋποθέσεις Σε περίπτωση αντικατάστασης στοιχείου, αφαιρέστε το υπάρχον στοιχείο προτού εκτελέσετε τη διαδικασία εγκατάστασης.
Αποσυναρμολόγηση και επανασυναρμολόγηση 73
Βήματα 1. Σύρετε τις μπροστινές θύρες εισόδου/εξόδου της πλακέτας συστήματος μέσα στις μπροστινές υποδοχές εισόδου/ εξόδου στο περίβλημα και ευθυγραμμίστε τις οπές για τις βίδες της πλακέτας συστήματος με τις αντίστοιχες οπές στο περίβλημα.
2. Επανατοποθετήστε τη μία βίδα της προεξοχής στήριξης κάρτας M.2 (#6-32) και τις οκτώ βίδες (#6-32) που συγκρατούν την πλακέτα συστήματος στο περίβλημα. 3. Δρομολογήστε και συνδέστε όλα τα καλώδια στις υποδοχές τους επάνω στην πλακέτα συστήματος. 4. Ευθυγραμμίστε το μπροστινό υποστήριγμα εισόδου/εξόδου με τις υποδοχές στο περίβλημα. 5. Επανατοποθετήστε τις δύο βίδες (#6-32) για να στερεώσετε την μπροστινή βάση στήριξης πλακέτας εισόδου/εξόδου στο περίβλημα. Επόμενα βήματα 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
5 Αντιμετώπιση προβλημάτων Θέματα: • • • • • Διαγνωστικοί έλεγχοι Dell SupportAssist για την απόδοση του συστήματος πριν από την εκκίνηση Συμπεριφορά LED διαγνωστικού ελέγχου Διαγνωστικά μηνύματα σφαλμάτων Μηνύματα σφαλμάτων συστήματος Απενεργοποίηση και ενεργοποίηση του Wi-Fi Διαγνωστικοί έλεγχοι Dell SupportAssist για την απόδοση του συστήματος πριν από την εκκίνηση Πληροφορίες γι αυτήν την εργασία Ο διαγνωστικός έλεγχος SupportAssist (γνωστός και ως διαγνωστικός έλεγχος συστήματος) εκτελεί έναν ολοκληρ
8. Αν υπάρξουν προβλήματα, παρουσιάζονται κωδικοί σφαλμάτων. Σημειώστε τον κωδικό του κάθε σφάλματος και τον αριθμό επικύρωσης και επικοινωνήστε με την Dell. Συμπεριφορά LED διαγνωστικού ελέγχου Πίνακας 7.
Πίνακας 7. Συμπεριφορά LED διαγνωστικού ελέγχου (συνεχίζεται) Μοτίβο αναβοσβησίματος Κεχριμπαρένιο χρώμα Λευκό Περιγραφή προβλήματος 3 1 Αποτυχία μπαταρίας CMOS Προτεινόμενη λύση ● ● 3 2 Αποτυχία PCI ή κάρτας/chip γραφικών 3 3 Το είδωλο αποκατάστασης του BIOS δεν βρέθηκε Επανατοποθετήστε την πλακέτα συστήματος.
Διαγνωστικά μηνύματα σφαλμάτων Πίνακας 8. Διαγνωστικά μηνύματα σφαλμάτων Μηνύματα σφαλμάτων Περιγραφή AUXILIARY DEVICE FAILURE Η επιφάνεια αφής ή το εξωτερικό ποντίκι μπορεί να είναι ελαττωματικά. Αν έχετε εξωτερικό ποντίκι, ελέγξτε τη σύνδεση του καλωδίου του. Ενεργοποιήστε την επιλογή Pointing Device (Συσκευή κατάδειξης) στο πρόγραμμα εγκατάστασης του συστήματος.
Πίνακας 8. Διαγνωστικά μηνύματα σφαλμάτων (συνεχίζεται) Μηνύματα σφαλμάτων Περιγραφή λειτουργία του υπολογιστή, επανεγκαταστήστε τη μονάδα σκληρού δίσκου και επανεκκινήστε τον υπολογιστή. Εκτελέστε τους ελέγχους Hard Disk Drive (Mονάδα σκληρού δίσκου) από το πρόγραμμα Dell Diagnostics (Διαγνωστικό πρόγραμμα Dell). HARD-DISK DRIVE CONTROLLER FAILURE 0 Η μονάδα σκληρού δίσκου δεν αποκρίνεται σε εντολές από τον υπολογιστή.
Πίνακας 8. Διαγνωστικά μηνύματα σφαλμάτων (συνεχίζεται) Μηνύματα σφαλμάτων Περιγραφή (Ελεγκτής πληκτρολογίου) στο πρόγραμμα Dell Diagnostics (Διαγνωστικό πρόγραμμα Dell). KEYBOARD STUCK KEY FAILURE Αν έχετε εξωτερικό πληκτρολόγιο, ελέγξτε τη σύνδεση του καλωδίου. Επανεκκινήστε τον υπολογιστή και αποφύγετε να αγγίξετε το πληκτρολόγιο στη διάρκεια της ρουτίνας εκκίνησης. Εκτελέστε τον έλεγχο Stuck Key (Κολλημένο πλήκτρο) στο πρόγραμμα Dell Diagnostics (Διαγνωστικό πρόγραμμα Dell).
Πίνακας 8. Διαγνωστικά μηνύματα σφαλμάτων (συνεχίζεται) Μηνύματα σφαλμάτων Περιγραφή εκχώρησης αρχείων) στον σκληρό δίσκο. Εκτελέστε τη βοηθητική εφαρμογή των Windows για έλεγχο σφαλμάτων, προκειμένου να ελέγξετε τη δομή των αρχείων στον σκληρό δίσκο. Για οδηγίες ανατρέξτε στο Windows Help and Support (Βοήθεια και Υποστήριξη των Windows) (κάντε κλικ στις επιλογές Start (Έναρξη) > Help and Support (Βοήθεια και υποστήριξη)).
Μηνύματα σφαλμάτων συστήματος Πίνακας 9. Μηνύματα σφαλμάτων συστήματος Μήνυμα συστήματος Περιγραφή Alert! Previous attempts at booting this system have failed at checkpoint [nnnn]. For help in resolving this problem, please note this checkpoint and contact Dell Technical Support (Ειδοποίηση! Οι προηγούμενες προσπάθειες για την εκκίνηση του συστήματος απέτυχαν στο σημείο ελέγχου [nnnn].
Απενεργοποίηση και ενεργοποίηση του Wi-Fi Πληροφορίες γι αυτήν την εργασία Εάν δεν είναι δυνατή η πρόσβαση του υπολογιστή σας στο Internet εξαιτίας προβλημάτων συνδεσιμότητας του Wi-Fi, μπορείτε να εκτελέσετε μια διαδικασία απενεργοποίησης και ενεργοποίησης του Wi-Fi. Η παρακάτω διαδικασία παρέχει οδηγίες για τον τρόπο διεξαγωγής της απενεργοποίησης και ενεργοποίησης του Wi-Fi: ΣΗΜΕΙΩΣΗ: Ορισμένοι ISP (Πάροχοι υπηρεσιών Internet) παρέχουν μια συσκευή συνδυασμένης λειτουργίας μόντεμ/ δρομολογητή. Βήματα 1.
6 Λήψη βοήθειας Θέματα: • Επικοινωνία με την Dell Επικοινωνία με την Dell Προϋποθέσεις ΣΗΜΕΙΩΣΗ: Αν δεν έχετε ενεργή σύνδεση στο Ίντερνετ, μπορείτε να βρείτε τις πληροφορίες επικοινωνίας στο τιμολόγιο αγοράς, στο δελτίο αποστολής, στον λογαριασμό ή στον κατάλογο προϊόντων της Dell. Πληροφορίες γι αυτήν την εργασία Η Dell παρέχει αρκετές επιλογές για υποστήριξη και εξυπηρέτηση μέσω Ίντερνετ και τηλεφώνου.