OptiPlex 3080 Micro Service Manual Regulatory Model: D14U Regulatory Type: D14U002 November 2020 Rev.
Catatan, perhatian, dan peringatan CATATAN: Sebuah CATATAN menandakan informasi penting yang membantu Anda untuk menggunakan yang terbaik dari produk Anda. PERHATIAN: PERHATIAN menunjukkan kemungkinan terjadinya kerusakan pada perangkat keras atau hilangnya data, dan memberi tahu Anda mengenai cara menghindari masalah tersebut. PERINGATAN: PERINGATAN menunjukkan potensi kerusakan harta benda, cedera pribadi, atau kematian © 2020 Dell Inc. atau anak-anak perusahaannya. Hak cipta dilindungi undang-undang.
Contents Chapter 1: Mengerjakan komputer Anda........................................................................................ 5 Petunjuk keselamatan.........................................................................................................................................................5 Sebelum mengerjakan bagian dalam komputer.......................................................................................................5 Pencegahan untuk keselamatan...........................
Removing the speaker................................................................................................................................................ 37 Installing the speaker.................................................................................................................................................. 38 Modul I/O opsional (Tipe C/ HDMI/VGA/DP/Serial)..............................................................................................
1 Mengerjakan komputer Anda Topik: • Petunjuk keselamatan Petunjuk keselamatan Gunakan panduan keselamatan berikut untuk melindungi komputer dari kemungkinan kerusakan dan memastikan keselamatan diri Anda. Kecuali disebutkan sebaliknya, setiap prosedur yang termasuk dalam dokumen ini mengasumsikan bahwa Anda telah membaca informasi keselamatan yang dikirimkan bersama dengan komputer Anda.
2. Matikan komputer Anda. Klik Start (Mulai) > Power (Daya) > Shut down (Matikan). CATATAN: Jika Anda menggunakan sistem operasi yang berbeda, lihat dokumentasi sistem operasi Anda untuk instruksi mematikan komputer. 3. Lepaskan komputer dan semua perangkat yang terpasang dari stopkontak. 4. Lepaskan sambungan semua perangkat jaringan dan periferal yang terpasang, seperti keyboard, mouse, dan monitor dari komputer Anda.
● Intermiten – Kegagalan intermiten menunjukkan sekitar 80 persen kegagalan terkait ESD. Tingkat tinggi dari kegagalan intermiten berarti bahwa sebagian besar waktu saat kegagalan terjadi, ini tidak segera dapat dideteksi. DIMM menerima guncangan statis, namun pelacakan hanya bersifat lemah dan tidak segera menghasilkan gejala terkait kerusakan.
atas tas ESD karena hanya bagian dalam tas yang terlindungi. Selalu letakkan komponen di tangan Anda, di alas ESD, di sistem, atau di dalam tas anti-statis. ● Mengangkut Komponen Sensitif – Saat mengangkut komponen sensitif ESD seperti suku cadang pengganti atau suku cadang yang akan dikembalikan ke Dell, penting untuk menempatkan suku cadang ini dalam tas anti-statis untuk transportasi yang aman.
2 Membongkar dan merakit kembali Topik: • • • • • • • • • • • • • • • • Recommended tools Screw List Komponen utama sistem Anda Penutup samping Bezel depan Unit hard disk Solid-state drive Unit kipas Kartu WLAN Unit pendingin Baterai sel berbentuk koin Modul memori Speaker Modul I/O opsional (Tipe C/ HDMI/VGA/DP/Serial) Prosesor Board sistem Recommended tools The procedures in this document require the following tools: ● Phillips #0 screwdriver ● Phillips #1 screwdriver ● Plastic scribe - Recommended for
Table 1. Screw list (continued) Component Screw type Quantity WLAN card M2x3.
Komponen utama sistem Anda 1.
2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Unit kipas Unit pendingin Speaker Rak hard disk Board sistem Sasis Prosesor WLAN M.2 Modul memori Solid-state drive M.2 Unit hard disk CATATAN: Dell menyediakan daftar komponen dan nomor komponennya untuk konfigurasi sistem asli yang dibeli. Komponen-komponen ini tersedia sesuai dengan cakupan garansi yang dibeli oleh pelanggan. Hubungi perwakilan penjualan Dell Anda untuk opsi pembelian. Penutup samping Removing the side cover Prerequisites 1.
Steps 1. Loosen the thumbscrew (6x32) that secures the side cover to the system.
2. Slide the side cover towards the front of the system and lift the cover. Installing the side cover Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the side cover and provides a visual representation of the installation procedure.
Steps 1. Align the side cover with the grooves on the chassis. 2. Slide the side cover towards the back of the system to install it. 3. Tighten the thumbscrew (6x32) to secure the side cover to the system. Next steps 1. Follow the procedure in after working inside your computer. Bezel depan Melepaskan bezel depan prasyarat 1. Ikuti prosedur dalam sebelum mengerjakan bagian dalam komputer Anda. 2. Lepaskan penutup samping.
langkah 1. Cungkil tab penahan untuk melepaskan bezel depan dari sistem. 2. Lepaskan bezel depan dari sistem. Memasang bezel depan prasyarat Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. tentang tugas ini Gambar berikut menunjukkan lokasi bezel depan dan merupakan representasi visual tentang prosedur pemasangan.
langkah 1. Posisikan bezel untuk menyejajarkan tab dengan slot pada sasis. 2. Tekan bezel hingga tab pelepas terpasang pada tempatnya ditandai dengan bunyi klik. langkah berikutnya 1. Pasang penutup samping. 2. Ikuti prosedur dalam setelah mengerjakan bagian dalam komputer Anda. Unit hard disk Removing the hard-drive assembly Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover.
Steps 1. Press the release tabs on the hard-drive assembly and slide it towards the front of the system to disconnect it from the connector on the system board. 2. Lift the hard drive assembly from the system. NOTE: Note the orientation of the hard drive so that you can replace it correctly. Removing the hard-drive bracket Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the 2.5 in. hard-drive assembly.
Steps 1. Pull one side of the hard-drive bracket to disengage the pins on the bracket from the slots on the drive. 2. Lift the hard-drive out of the bracket. Installing the hard-drive bracket Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the hard-drive bracket and provides a visual representation of the installation procedure.
Steps 1. Place the hard-drive into the bracket. 2. Align and insert the pins on the drive bracket with the slots on the drive. NOTE: Note the orientation of the hard-drive so that you can replace it correctly. Next steps 1. Install the 2.5 in. hard-drive assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Installing the 2.5 in. hard-drive assembly Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
Steps 1. Insert the hard-drive assembly into the slot on the system. 2. Slide the hard-drive assembly towards the connector in the system board until the release tabs clicks into place. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Solid-state drive Removing the M.2 2230 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the hard-drive assembly.
About this task The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure. Steps 1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board. 2. Slide and lift the solid-state drive off the system board. Installing the M.2 2230 PCIe solid-state drive Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board. 2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector. 3. Replace the screw (M2x3.5) that secures the M.2 2230 PCIe solid-state drive to the system board. Next steps 1. Install the hard-drive assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2280 PCIe solid-state drive Prerequisites 1.
Steps 1. Remove the screw (M2x3.5) that secures the solid-state drive to the system board. 2. Slide and lift the solid-state drive off the system board. Installing the M.2 2280 PCIe solid-state drive Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the solid-state drive and provides a visual representation of the installation procedure.
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board. 2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector. 3. Replace the screw (M2x3.5) that secures the M.2 2280 PCIe solid-state drive to the system board. Next steps 1. Install the hard-drive assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Unit kipas Removing the fan assembly Prerequisites 1.
Membongkar dan merakit kembali
Steps 1. Unroute the speaker cable from the routing guide on the fan assembly. 2. Press the blue tabs on both sides of the fan, and slide to lift the fan to release it from the system. 3. Turn the fan assembly over. 4. Disconnect the fan cable from the connector on the system board. Lift the fan assembly out of the system. Installing the fan assembly Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan.
Membongkar dan merakit kembali
Steps 1. Connect the fan cable to the connector on the system board. 2. Turn the fan assembly over. 3. Press the release tab on the fan assembly and place it on the system until it clicks into place. 4. Route the speaker cable through the routing guides on the fan assembly. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Kartu WLAN Removing the WLAN card Prerequisites 1. Follow the procedure in before working inside your computer.
2. Remove the side cover. 3. Remove the hard-drive assembly. About this task The following images indicate the location of the wireless card and provide a visual representation of the removal procedure. Steps 1. Remove the (M2x3.5) screw that secures the WLAN card bracket to the system board. 2. Slide and lift the WLAN card bracket away from the WLAN card. 3. Disconnect the antenna cables from the WLAN card. 4. Slide and remove the WLAN card from the connector on the system board.
Steps 1. Connect the antenna cables to the WLAN card. The following table provides the antenna-cable color scheme for the WLAN card of your computer. Table 2. Antenna-cable color scheme Connectors on the wireless card Antenna-cable color Main (white triangle) White Auxiliary (black triangle) Black 2. Place the WLAN card bracket to secure the antenna cables. 3. Align the notch on the WLAN card with the tab on the WLAN card slot. Insert the WLAN card into the connector on the system board. 4.
Unit pendingin Removing the heat sink Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan assembly. About this task The following images indicate the location of the heat sink and provide a visual representation of the removal procedure. Steps 1. Loosen the three captive screws that secure the heat sink to the system. NOTE: Loosen the screw in the sequential order (1,2,3) as printed on the heat sink. 2.
Installing the heat sink Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the heat sink and provides a visual representation of the installation procedure. Steps 1. Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor. 2. Tighten the captive screws that secure the heat sink to the system board.
Baterai sel berbentuk koin Removing the coin-cell battery Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. NOTE: Removing the coin-cell battery resets the BIOS setup program settings to default. It is recommended that you note the BIOS setup program settings before removing the coin-cell battery. About this task The following images indicate the location of the coin-cell battery and provide a visual representation of the removal procedure. Steps 1.
Steps 1. Insert the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector. 2. Press the battery into the connector until it locks into place. Next steps 1. Install the side cover. 2. Follow the procedure in after working inside your computer. Modul memori Removing the memory modules Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the fan assembly.
Steps 1. Pull the securing clips from the memory module until the memory module pops up. 2. Slide and remove the memory module from the memory-module slot. Installing the memory modules Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the memory modules and provides a visual representation of the installation procedure.
Steps 1. Align the notch on the memory module with the tab on the memory-module slot. 2. Slide the memory module firmly into the slot at an angle and press the memory module down until it clicks into place. NOTE: If you do not hear the click, remove the memory module and reinstall it. Next steps 1. Install the fan assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Speaker Removing the speaker Prerequisites 1.
Steps 1. Disconnect the speaker cable from the system board. 2. Press the release tab and lift the speaker along with the cable from the system board. Installing the speaker Prerequisites Jika Anda mengganti komponen, lepaskan komponen yang ada sebelum melakukan prosedur pemasangan. About this task The following image indicates the location of the speaker and provides a visual representation of the installation procedure.
Steps 1. Align and insert the speaker into the slot and press it until the release tab clicks. 2. Connect the speaker cable to the system board. Next steps 1. Install the fan assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Modul I/O opsional (Tipe C/ HDMI/VGA/DP/Serial) Removing optional I/O modules (Type C/ HDMI/VGA/DP/Serial) Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover.
Installing optional I/O modules (Type C/ HDMI/VGA/DP/Serial) Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the system board and provide a visual representation of the installation procedure.
Membongkar dan merakit kembali 41
Membongkar dan merakit kembali
Steps 1. To remove the dummy metal bracket, insert a flat-head screwdriver in the hole of the bracket. Push the bracket to release the bracket, and then lift the bracket out from the system. 2. Insert the optional I/O module (Type-C/HDMI/VGA/DP/Serial) into its slot from the inside of your computer. 3. Connect the I/O cable to the connector on the system board. 4. Replace the two (M3X3) screws to secure the optional I/O module to the system. Next steps 1. Install the side cover. 2.
2. Remove the side cover. 3. Remove the fan assembly. 4. Remove the heat sink. About this task The following images indicate the location of the processor and provide a visual representation of the removal procedure. Steps 1. Press down and push the release lever away from the processor to release it from the securing tab. 2. Lift the lever upward to lift the processor cover.
About this task The following image indicates the location of the processor and provides a visual representation of the installation procedure. Steps 1. Align the pin-1 corner of the processor with the pin 1 corner of the processor socket, and then place the processor in the processor socket. NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height.
Board sistem Removing the system board Prerequisites 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. Follow the procedure in before working inside your computer. Remove the side cover. Remove the hard drive assembly. Remove the solid-state drive. Remove the WLAN card. Remove the fan assembly. Remove the heat sink. Remove the memory modules. Remove the speaker. Remove the optional IO module. Remove the processor.
Membongkar dan merakit kembali 47
Steps 1. Remove the screw (6-32) that secures the hard drive caddy support to the system board. 2. Lift the hard drive caddy support away from the system board. 3. Remove the two (M3x4) screws and three (6-32) screws that secure the system board to the chassis. 4. Lift the system board away from the chassis. Installing the system board Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure.
Membongkar dan merakit kembali 49
Steps 1. Align and lower the system board into the system until the connectors at the back of the system board align with the slots on the chassis, and the screw holes on the system board align with the standoffs on the system. 2. Replace the two (M3x4) screws and three (6-32) screws to secure the system board to the chassis. 3. Align the slot on the hard drive caddy support with system board and place the hard drive caddy on the system board. 4.
3 Pemecahan Masalah Topik: • • • • • Diagnostik Pemeriksaan Kinerja Sistem Pra-boot SupportAssist Dell Perilaku LED Diagnostik Pesan galat diagnostik Pesan galat sistem Siklus daya WiFi Diagnostik Pemeriksaan Kinerja Sistem Pra-boot SupportAssist Dell tentang tugas ini Diagnostik SupportAssist (juga dikenal sebagai diagnostik sistem) melakukan pemeriksaan lengkap perangkat keras Anda.
Perilaku LED Diagnostik Tabel 3. Perilaku LED Diagnostik Pola berkedip Kuning Putih Uraian masalah 1 2 Unrecoverable SPI Flash Failure (Kegagalan Flash SPI yang tidak dapat dipulihkan) 2 1 Kegagalan CPU Resolusi yang disarankan ● ● 2 2 Kegagalan board sistem ● (termasuk masalah BIOS atau kesalahan ROM) ● 2 3 Tidak ada memori/RAM yang terdeteksi ● ● Lakukan flash ke BIOS versi terbaru Jika masalah berlanjut, ganti board sistem. Konfirmasi bahwa modul memori dipasang dengan benar.
Tabel 3. Perilaku LED Diagnostik (lanjutan) Pola berkedip Kuning Putih Uraian masalah 3 6 Korupsi Flash SBIOS Resolusi yang disarankan ● Korupsi flash dideteksi oleh SBIOS Jika masalah berlanjut, ganti board sistem. ● 3 7 Kesalahan ME (Management Engine/Manajemen Mesin) Intel ● ● 4 2 Waktu menunggu habis pada ME untuk membalas pesan HECI Jika masalah berlanjut, ganti board sistem. Masalah Sambungan Kabel Daya CPU Pesan galat diagnostik Tabel 4.
Tabel 4. Pesan galat diagnostik (lanjutan) Pesan Galat Deskripsi GENERAL FAILURE Sistem pengoperasian tidak dapat menjalankan perintah. Pesan biasanya diikuti dengan informasi spesifik. Misalnya, Printer out of paper. Take the appropriate action. HARD-DISK DRIVE CONFIGURATION ERROR Komputer tidak dapat mengidentifikasi tipe drive. Matikan komputer, lepaskan hard drive, dan lakukan booting komputer dari drive optis. Lalu, matikan komputer, pasang kembali hard drive, dan nyalakan kembali komputer.
Tabel 4. Pesan galat diagnostik (lanjutan) Pesan Galat Deskripsi LICENSED CONTENT IS NOT ACCESSIBLE IN MEDIADIRECT Dell MediaDirect tidak dapat memverifikasi pembatasan Digital Rights Management (DRM) pada file, jadi file tidak dapat diputar. MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE Modul memori mungkin rusak atau dipasang tidak benar. Pasang kembali modul memori atau ganti jika perlu.
Tabel 4. Pesan galat diagnostik (lanjutan) Pesan Galat Deskripsi komputer Anda ke outlet listrik untuk mengisi daya baterai. Jika masalah tetap muncul, Hubungi Dell. TIME-OF-DAY NOT SET-PLEASE RUN THE SYSTEM SETUP PROGRAM Waktu atau tanggal yang tersimpan pada Pengaturan Sistem tidak cocok dengan jam komputer. Perbaiki pengaturan untuk opsi Date and Time (Tanggal dan Waktu). TIMER CHIP COUNTER 2 FAILED Chip pada board sistem mungkin tidak berfungsi.
Siklus daya WiFi tentang tugas ini Jika komputer Anda tidak dapat mengakses internet karena masalah konektivitas WiFi, prosedur siklus daya WiFi dapat dilakukan. Prosedur berikut ini memberikan petunjuk tentang cara melakukan siklus daya WiFi: CATATAN: Beberapa ISP (Penyedia Layanan Internet) menyediakan perangkat kombo modem/router. langkah 1. Matikan komputer Anda. 2. Matikan modem. 3. Matikan router nirkabel. 4. Tunggu selama 30 detik. 5. Nyalakan router nirkabel. 6. Nyalakan modem. 7.
4 Mendapatkan bantuan Topik: • Menghubungi Dell Menghubungi Dell prasyarat CATATAN: Jika Anda tidak memiliki koneksi internet aktif, Anda dapat menemukan informasi kontak pada tagihan pembelian, slip kemasan, kuitansi, atau katalog produk Dell. tentang tugas ini Dell menyediakan beberapa dukungan berbasis online dan telepon serta opsi servis. Ketersediaan bervariasi menurut negara dan produk, dan sebagian layanan mungkin tidak tersedia di daerah Anda.