Owners Manual

5 Repeat the steps to remove any additional PCIe expansion cards.

Installing PCIe expansion card

1 Insert the expansion card into the connector on the system board.

2 Press the expansion card until it clicks into place.

3 Close the expansion card latch and press it until it clicks into place.

4 Install the:

a front bezel

b cover

5 Follow the procedure in After working inside your computer.

Cooling shroud

Removing the cooling shroud

NOTE

: Cooling shroud is encompasses the processor assembly and it must be removed to access the processor.

1 Follow the procedure in Before working inside your computer.

2 Remove the cover.

3 To remove cooling shroud:

a Holding the touch points, pull the fan duct bracker outwards to release the cooling shroud.

Disassembly and reassembly