Owners Manual

Installing M.2 PCIe SSD

1 Insert the M.2 PCIe SSD to the connector

2 Press the blue plastic tab to secure the M.2 PCIe SSD.

3 Install the:

a optical drive

b cooling shroud

c 2.5 inch hard drive assembly

d front bezel

e cover

4 Follow the procedure in After working inside your computer.

Heat sink assembly

Removing heat sink assembly

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a cover

b front bezel

c 2.5 inch hard drive assembly

d cooling shroud

e optical drive

3 To remove the heat sink assembly:

a Disconnect the heat sink assembly cable from the connector on the system board [1].

b Loosen the 6 captive screws that secure the heat sink assembly to the system board [2].

NOTE

: Loosen the screws based on the numbers available on the system board.

c Lift the heat sink assembly away from the computer [3].

Disassembly and reassembly