Owners Manual

VGA Daughterboard

Removing the VGA daughter board

1 Follow the procedure in Before Working Inside Your Computer.

2 Remove the:

a Back Cover

b Bezel

3 Open the Front Bezel Door

4 To remove the VGA daughter board:

a Remove the screws that secure the VGA connector to the computer [1].

b Slide the VGA connector to release it from the computer [2].

c Remove the screw that secures the VGA daughter board to the computer [3].

d Lift the VGA daughter board using the handle to remove it from the computer [4].

Installing the VGA daughter board

1 Align the VGA daughter board with the screw holder on the system board.

2 Tighten the screw to secure the VGA daughter board to the system board.

3 Insert the VGA connector into the slot at the back of the computer.

4 Tighten the screws to secure the VGA connector to the computer.

5 Install the:

a Bezel

b Cover

6 Follow the procedure in After Working Inside Your Computer.

SD card

Removing SD card reader

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a cover

b front bezel

c 2.5 inch hard drive assembly

d cooling shroud

e optical drive

f M.2 PCIe SSD

3 To remove the SD card reader:

a Release the power cables from the retention clips on the SD card reader enclosure [1].

b Remove the 6 screws that secure the SD card reader [2].

c Lift the SD card reader away from the computer [3].

Disassembly and reassembly