Owners Manual

Installing power supply unit — PSU

1 Insert the PSU into the slot.

2 Slide the PSU towards the back of the computer until it clicks into place.

3 Replace the screws( 6lbs) to secure the PSU to the computer.

4 Route the PSU cables through the retention clips.

5 Connect the PSU cables to the connectors on the system board.

6 Install the:

a optical drive

b cooling shroud

c 2.5 inch hard drive assembly

d front bezel

e cover

7 Follow the procedure in After working inside your computer.

Power switch

Removing power switch

1 Follow the procedure in Before working inside your computer.

2 Remove the:

Disassembly and reassembly