Owners Manual

a cover

b front bezel

c 2.5 inch hard drive assembly

d cooling shroud

e optical drive

3 To release the power switch:

a Disconnect the power switch cable from the system board [1].

b Press the power switch retention tabs and pull out from the computer [2, 3].

Installing power switch

1 Slide the power switch module into the slot on the chassis until it clicks into place.

2 Connect the power switch cable to the connector on the system board.

3 Install the:

a optical drive

b cooling shroud

c 2.5 inch hard drive assembly

d front bezel

Disassembly and reassembly