Owners Manual

Option Description
Fan Control Override Allows you to determine the speed of the system fan. When this option is enabled, the system fan
runs at the maximum speed. This option is disabled by default.
USB Wake Support Allows you to enable the USB devices to wake the computer from standby mode. The option "Enable
USB Wake Support" is selected by default
Wake on LAN/WWAN This option allows the computer to power up from the o state when triggered by a special LAN
signal. This feature only works when the computer is connected to AC power supply.
• Disabled - Does not allows the system to power on by special LAN signals when it receives a
wake-up signal from the LAN or wireless LAN.
• LAN - Allows the system to be powered on by special LAN signals.
• WLAN Only - Allows the system to be powered on by special WLAN signals.
• LAN or WLAN- Allows the system to be powered on by special LAN signals or WLAN signals.
• LAN with PXE Boot - A wakeup packet sent to the system in either the S4 or S5 state, that will
cause the system to wake-up and immediately boot to PXE.
This option is Disabled by default.
Block Sleep Allows you to block entering to sleep (S3 state) in OS environment. This option is disabled by default.
Table 12. POST Behavior
Option Description
Numlock LED Allows you to enable or disable the Numlock feature when your computer starts. This option is
enabled by default.
Keyboard Errors Allows you to enable or disable the keyboard error reporting when the computer starts. This option is
enabled by default.
Warnings and Errors This option can speed up the boot process by bypassing some compatibility steps:
• Prompt on Warnings and Errors (enabled by default)
• Continue on Warnings
• Continue on Warnings and Errors
Extend BIOS POST Time The options are:
• 0 seconds (default)
• 5 seconds
• 10 seconds
Full Screen Logo This options is disabled by default.
Table 13. Virtualization Support
Option Description
AMD-V Technology This option is enabled by default.
AMD-VI Technology This option is enabled by default.
Table 14. Maintenance
Option Description
Service Tag Displays the Service Tag of your computer.
Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is set by default.
56 System setup