Owners Manual

Installing 3.5–inch hard drive into the hard drive bracket

1 Flex the side of the hard drive bracket, to align and insert the pins on the bracket into the hard drive.

2 Insert the hard drive into the hard drive bracket until it clicks into place.

3 Install the:

a Hard drive assembly

b Front bezel

c Back Cover

4 Follow the procedure in After working inside your computer.

Installing 3.5–inch hard drive assembly

1 Insert the hard drive assembly into the slot on the computer until it clicks into place.

2 Place the HDD ller brcaket.

3 Connect the SATA cable and the power cable to the connectors on the hard drive and re-route the cables along the caddy.

4 Install the:

a Front bezel

b Back cover

5 Follow the procedure in After working inside your computer.

Removing 2.5–inch hard drive assembly

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a Back cover

b Front bezel

3 Open the Front panel door.

4 To remove hard drive assembly:

a Disconnect the hard drive's data and power cables from their respective connectors on the hard drive [1].

b Press the blue tabs on both sides [2] and pull the drive assembly out of the computer [3].

Disassembly and reassembly