Owners Manual

Installing 2.5–inch hard drive into the hard drive bracket

1 Flex the side of the hard drive bracket, to align and insert the pins on the bracket into the hard drive.

2 Insert the hard drive into the hard drive bracket until it clicks into place.

3 Install the:

a 2.5 inch hard drive assembly

b Front bezel

c Back cover

4 Follow the procedure in After working inside your computer.

Installing 2.5–inch hard drive assembly

1 Insert the drive assembly into the slot on the computer until it clicks into place.

2 Close the front panel door.

3 Connect the SATA cable and the power cable to the connectors on the hard drive.

4 Install the:

a Front bezel

b Cover

5 Follow the procedure in After working inside your computer.

Optical drive

Removing optical drive

1 Follow the procedure in Before working inside your computer.

2 Remove the:

a Back cover

b Front bezel

3 Open the Front panel door.

4 To remove optical drive assembly:

a Disconnect the data cable and power cable from the connectors on the optical drive [1].

NOTE

: You may need to unroute the cables from the tabs under the drive cage to allow you to disconnect the cables

from the connectors.

b Close the front panel door [2].

Disassembly and reassembly