Owners Manual

c Expansion card

3 Open the Front panel door.

4 To remove the coin cell battery:

a Using a plastic scribe press the release latch until the coin cell battery pops out [1].

b Remove the coin cell battery from the connector on the system board [2].

Installing coin cell battery

1 Hold the coin cell battery with the "+" sign facing up and slide it under the securing tabs at the positive side of the connector.

2 Press the battery into the connector until it locks into place.

3 Close the front panel door.

4 Install the:

a Expansion card

b Front bezel

c Back cover

5 Follow the procedure in After working inside your computer.

Disassembly and reassembly