OptiPlex 5070בתצורת Tower מדריך שירות דגם תקינהD18M : סוג תקינהD18M005 :
הערות ,התראות ואזהרות הערה "הערה" מציינת מידע חשוב שמסייע להשתמש במוצר ביתר יעילות. התראה "זהירות" מציינת נזק אפשרי לחומרה או אובדן נתונים ,ומסבירה כיצד ניתן למנוע את הבעיה. אזהרה אזהרה מציינת אפשרות לנזקי רכוש ,נזקי גוף או מוות. © .Dell Inc 2019 - 2018או חברות הבת שלה .כל הזכויות שמורות EMC ,Dell .וכן סימנים מסחריים נוספים הם סימנים מסחריים של Dell Inc.או חברות הבת שלה .סימנים מסחריים נוספים עשויים להיות סימנים מסחריים של בעליהם בהתאמה.
תוכן עניינים 1עבודה על המחשב7............................................................................................................................. הוראות בטיחות7 ......................................................................................................................................................................... לפני העבודה על חלקיו הפנימיים של המחשב7 .....................................................................................................................
הוצאת כרטיס ה32 ...............................................................................................................................................M.2 SSD- התקנת כונן ה33 ..................................................................................................................................................M.2 SSD- קורא כרטיסי 34 .....................................................................................................................................................
מכלול כונן קשיח בגודל 2.5אינץ'74 ............................................................................................................................................ הסרת מכלול כונן קשיח בגודל 2.5אינץ'74 ............................................................................................................................ התקנת מכלול הכונן בגודל 2.5אינץ'74 .........................................................................................................................
הסרת לוח המערכת112 ......................................................................................................................................................... התקנת לוח המערכת115 ....................................................................................................................................................... 5פתרון בעיות118.................................................................................................................................
1 עבודה על המחשב הוראות בטיחות היעזר בהוראות הבטיחות הבאות כדי להגן על המחשב מפני נזק אפשרי וכדי להבטיח את ביטחונך האישי .אלא אם צוין אחרת ,כל הליך מניח שמתקיימים התנאים הבאים: • • קראת את הוראות הבטיחות המצורפות למחשב. ניתן להחליף רכיב או ,אם נרכש בנפרד ,להתקין אותו על ידי ביצוע הליך ההסרה בסדר הפוך. הערה נתק את כל מקורות החשמל לפני פתיחה של כיסוי המחשב או של לוחות .
• • • • נתק את כל קווי הרשת ,הטלפון והתקשורת מהמערכת. השתמש בערכת השירות בשטח ESDבעת עבודה בתוך כדי למנוע נזק עקב פריקה אלקטרוסטטית ).(ESD אחרי הוצאת רכיב המערכת ,הנח בזהירות את הרכיב שהוסר על שטיחון אנטי-סטטי. יש לנעול נעליים עם סוליות גומי שאינן מוליכות חשמל כדי להפחית את הסיכוי להתחשמל. מצב המתנה מוצרי Dellעם מצב המתנה חייבים להיות מנותקים מהחשמל לפני שתוכל לפתוח את המארז .במערכות הכוללות מצב המתנה למעשה יש זרם חי גם כאשר הן כבויות .
• • • • • רצועת ההארקה ותיל הקישור לבין עורך ,מרבד ה ESD-ופריטי החומרה – מכונה קישור .השתמש רק בערכות לשירות בשטח שיש בהן רצועת פרק יד, מרבד ותיל קישור .לעולם אל תשתמש ברצועות פרק יד ללא תיל .זכור תמיד שהחיווט הפנימי ברצועת כף היד מועד לנזק משחיקה ובלאי תוך כדי השימוש הרגיל ,לכן חובה לבדוק אותם באופן סדיר עם טסטר לרצועות פרק יד ,כדי למנוע נזקי חשמל סטטי לא מכוונים לפריטי חומרה .מומלץ לבדוק את הרצועה לפרק כף היד ואת כבל המחבר לפחות פעם בשבוע.
2 טכנולוגיה ורכיבים בפרק זה נמצא פירוט של הטכנולוגיה והרכיבים הזמינים במערכת. נושאים: • • • • • • DDR4 תכונות USB USB Type-C היתרונות של DisplayPort over USB Type-C יציאת HDMI 2.0 זיכרון Intel Optane DDR4 זיכרון (double data rate fourth generation) DDR4הוא ממשיכן של טכנולוגיות DDR2ו DDR3-ומאפשר קיבולת של עד 512גיגה סיביות ,בהשוואה לקיבולת המרבית של DDR3-שעמדה על 128גיגה סיביות-לכל .
קצה מעוקל מודולי DDR4כוללים קצה מעוקל שמקל על הכנסתם ומפחית את הלחץ על ה PCB-במהלך התקנת הזיכרון. איור .3קצה מעוקל שגיאות זיכרון במקרה של שגיאות זיכרון במערכת ,יוצג קוד התקלה החדש באמצעות הנורית :יציב-מהבהב-מהבהב או יציב-מהבהב-יציב .במקרה של כשל בכל רכיבי הזיכרון ,ה LCD-לא יידלק כלל .נסה לאתר תקלות הכרוכות בכשל זיכרון על ידי התקנת מודולי זיכרון הידועים כתקינים במחברי הזיכרון שבתחתית המערכת או מתחת למקלדת ,כפי שנהוג בחלק מהמערכות הניידות.
מהירות נכון לכרגע ,ישנם 3מצבי מהירות שהוגדרו על-ידי המפרט העדכני ביותר של USB 3.1 / USB 3.0מדור .1מצבי המהירות הםHi-Speed ,Super-Speed : ו .Full-Speed-מצב SuperSpeedהחדש מצויד בקצב העברת נתונים של .4.8Gbpsבעוד שהמפרט כולל את מצבי ה Hi-Speed USB-ו,Full-Speed- המוכרים יותר כ USB 2.0-ו 1.1-בהתאמה ,המצבים האיטיים יותר עדיין פועלים בקצב של 480Mbpsו ,12Mbps-בהתאמה ,ונשמרים כדי לאפשר תאימות לאחור. רמת הביצועים של USB 3.1 / USB 3.
תאימות החדשות הטובות הן ש USB 3.1 / USB 3.0-מדור 1תוכנן בקפידה מההתחלה להתקיים בשלום לצד .USB 2.0ראשית ,בעוד ש USB 3.1 / USB 3.0-מדור 1כולל חיבורים פיזיים חדשים ועקב כך כבלים חדשים שנועדו להפיק את המרב מיכולת המהירות החדשה שהפרוטוקול החדש מעניק ,המחבר עצמו נותר באותה צורה מלבנית עם אותם ארבעה מגעים שהיו ב USB 2.0-ובאותו מיקום בדיוק ,כפי שהיה בעבר .חמישה חיבורים חדשים שנועדו לשאת ,לקבל ולשדר נתונים באופן עצמאי לבצע קליטה נתונים משודרים באופן עצמאי קיימים בכבלים של USB 3.
(High-Definition Multimedia Interface) HDMIהוא ממשק שמע/וידאו דיגיטלי מלא ,לא דחוס בתקן הנתמך על ידי התעשייה HDMI .הוא ממשק שמתווך בין כל מקור שמע/וידאו דיגיטלי תואם ,כגון נגני DVDאו מקלטי ,A/Vלבין צג שמע ו/או וידאו דיגיטלי תואם ,כגון טלוויזיה דיגיטלית ).(DTV היישומים המיועדים עבור טלוויזיות עם חיבור HDMIונגני .DVDהיתרון העיקרי של HDMIהוא צמצום כמות הכבלים והשימוש בו להגנה על תוכןHDMI .
.4במסך האזהרה ,בחר בכונן מהיר מתאים ולאחר מכן לחץ על ) Yesכן( כדי להמשיך להפעיל את זיכרון .Intel Optane .5לחץ על ) Reboot < Intel Optane memoryזיכרון < Intel Optaneאתחול( כדי להפעיל את זיכרון .Intel Optane הערה ייתכן שיישומים יזדקקו לעד שלוש הפעלות לאחר הפעלת הזיכרון כדי ליהנות מביצועים אופטימאליים. השבתת זיכרון Intel Optane התראה אחרי השבתת זיכרון ,Intel Optaneאל תסיר את מנהל ההתקן של טכנולוגיית ,Intel Rapid Storageאחרת הדבר יוביל לשגיאת מסך כחול .
3 רכיבי המערכת העיקריים .1 .2 .3 .4 .5 .6 .7 .8 .9 .10 .11 .12 .13 .14 .15 כיסוי צד מכלול כונן קשיח בגודל 3.5אינץ' כונן אופטי מכלול גוף הקירור מעבד מודול זיכרון ) M.2 PCIe SSDכונן SSDמסוג (M.2 PCIe לחצן הפעלה לוח המערכת דלת הלוח הקדמי מסגרת צג מכלול כונן קשיח בגודל 2.5אינץ' רמקול מאוורר המערכת יחידת ספק זרם הערה Dellמספקת רשימה של רכיבים ומספרי החלקים שלהם עבור תצורת המערכת המקורית שנרכשה .
4 הסרה והתקנה של רכיבים כיסוי צד הסרת הכיסוי הצדדי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2להסרת הכיסוי: (aהחלק את לשונית השחרור כדי לשחרר את הכיסוי מהמערכת ].[1 (bהחלק את הכיסוי לעבר חלקה האחורי של המערכת ,והרם אותו מהמערכת ].[2 התקנת הכיסוי הצדדי .1כדי להתקין את הכיסוי הצדדי: (aהנח את הכיסוי על המערכת והחלק אותו קדימה עד שייכנס למקומו בנקישה.
.2בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. לוח קדמי הסרת המסגרת הקדמית .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את כיסוי הצד. .3להסרת המסגרת הקדמית: (aהרם את לשוניות ההחזקה כדי לשחרר את המסגרת הקדמית מהמערכת. (bהסר את מסגרת הצג הקדמית מהמערכת.
התקנת המסגרת הקדמית .1כדי להתקין את המסגרת הקדמית: (aמקם את מסגרת הצג בהתאם למחזיקי הלשוניות עם החריצים על מארז המערכת. (bלחץ על המסגרת עד שהלשוניות ייכנסו למקומן בנקישה .
.2התקן את הכיסוי הצדדי. .3בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. דלת הלוח הקדמי פתיחת הדלת של הלוח הקדמי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי התראה דלת הלוח הקדמי נפתחת במידה מוגבלת בלבד .עיין בתמונה המודפסת על דלת הלוח הקדמי כדי לראות עד כמה ניתן לפתוח את הדלת. .3משוך את הכיסוי של הלוח הקדמי כדי לפתוח אותו.
סגירת דלת הלוח הקדמי .1הפוך את דלת הלוח הקדמי כדי לסגור אותה.
.2התקן את: (aהלוח הקדמי (bכיסוי צד .3בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מכלול הכונן הקשיח 3.5 -אינץ' ו 2.5-אינץ' הסרת מכלול הכונן הקשיח בגודל 3.5אינץ' .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3כדי להסיר את מכלול הכונן הקשיח: (aנתק את כבל ה SATA-ואת כבל החשמל מהמחברים של הכונן הקשיח.
(bהסר את תושבת המילוי של הכונן הקשיח מהמערכת ].[1 (cלחץ על הלשוניות הכחולה ] [2ומשוך את מכלול הכונן הקשיח אל מחוץ למערכת ].[3 הסרת הכונן הקשיח בגודל 3.5אינץ' מתושבת הכונן הקשיח .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .
(aכיסוי צד (bהלוח הקדמי (cמכלול כונן קשיח בגודל 3.5אינץ' .3כדי להסיר את הכונן הקשיח: (aמשוך בצד אחד של תושבת הכונן הקשיח כדי לנתק את הפינים שבתושבת מהחריצים שבכונן הקשיח ].[1 (bהרם את הכונן הקשיח והוצא אותו מתושבת הכונן הקשיח ].[2 התקנת הכונן הקשיח בגודל 3.5אינץ' לתוך תושבת הכונן הקשיח .1כדי להתקין את הכונן הקשיח: (aישר את הכונן הקשיח מול צדה של תושבת הכונן הקשיח ,משוך את הלשוניות בקצה השני כדי להכניס את הפינים על התושבת לכונן הקשיח ].
.3חבר את כבל ה SATA-ואת כבל החשמל למחברים של הכונן הקשיח. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב.
הסרת מכלול כונן קשיח בגודל 2.5אינץ' .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול הכונן הקשיח: (aנתק את כבל הנתונים וכבל החשמל של הכונן הקשיח מהמחברים של הכונן הקשיח בגודל 2.5אינץ' ].[1 (bדחף את הלשוניות של המכלול שבשני הצדדים ] [2ומשוך את מכלול הכונן הקשיח אל מחוץ למערכת ].[3 הסרת הכונן בגודל 2.5אינץ' מתושבת הכונן .
התקנת הכונן הקשיח בגודל 2.5אינץ' לתוך תושבת הכונן הקשיח .1כדי להתקין את הכונן הקשיח: (aישר את הכונן הקשיח מול צדה של תושבת הכונן הקשיח ,משוך את הלשוניות בקצה השני כדי להכניס את הפינים על התושבת לכונן הקשיח. (bהכנס את הכונן הקשיח לתושבת הכונן הקשיח עד שיינעל במקומו בנקישה ].[1 (cהכנס את הכונן הקשיח לתושבת הכונן הקשיח עד שיינעל במקומו בנקישה ].[2 .2התקן את: (aמכלול כונן קשיח בגודל 2.5אינץ' (bהלוח הקדמי (cכיסוי צד .
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולה המפורטת בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. כונן אופטי הסרת הכונן האופטי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול הכונן האופטי: (aנתק את כבל הנתונים וכבל החשמל של הכונן האופטי מהמחברים בכונן האופטי ].
(cלחץ על לשונית השחרור הכחולה ] [1והחלק את הכונן האופטי אל מחוץ למערכת ].
התקנת הכונן האופטי .1להתקנת הכונן האופטי: (aסגור את דלת הלוח הקדמי. (bהכנס את הכונן האופטי לתוך תא הכונן האופטי עד שייכנס למקומו בנקישה.
(cפתח את דלת הלוח הקדמי ].[1 (dנתב את הכבלים מתחת לכלוב הכונן. (eחבר את כבל הנתונים האופטי ואת כבל החשמל למחברים של הכונן האופטי ].
.2התקן את: (aהלוח הקדמי (bכיסוי צד .3בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. M.2 PCIe SSD הוצאת כרטיס הM.2 SSD- .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כונן ה:M.2 SSD- (aהסר את הבורג היחיד שמהדק את כונן ה SSD-ללוח המערכת ].[1 (bנתק את כונן ה M.2 SSD-מהמחבר שלו בלוח המערכת ].
התקנת כונן הM.2 SSD- .1הכנס את כרטיס ה M.2 SSD-למחבר שבלוח המערכת ].[1 .2החזר את הבורג הבודד כדי לקבע את כרטיס ה SSD-ללוח המערכת ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. קורא כרטיסי SD הסרת קורא כרטיס הSD- .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כרטיס ה:SD- (aנתק את קורא כרטיסי ה SD-מהמחבר שבלוח המערכת ].
התקנת קורא כרטיס הSD- .1כדי להתקין את קורא כרטיסי ה:SD- (aהכנס את קורא כרטיסי ה SD-לתוך החריץ בדלת הלוח הקדמי ].[1 (bהחזר את הבורג כדי להדק את קורא כרטיסי ה SD-לדלת הלוח הקדמי ].[2 (cחבר את כבל לוח קורא כרטיסי ה SD-אל המחבר שבלוח המערכת ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מודול זיכרון הסרת מודול זיכרון .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מודול הזיכרון: (aמשוך את התפסים שמקבעים את מודול הזיכרון ,עד שהמודול יקפוץ ממקומו כלפי מעלה ].
התקנת מודול הזיכרון .1כדי להתקין את מודול הזיכרון: (aישר את החריץ שבמודול הזיכרון עם הלשונית שבמחבר מודול הזיכרון. (bהכנס את מודול הזיכרון לתוך שקע מודול הזיכרון ].[1 (cלחץ על מודול הזיכרון עד שלשוניות ההחזקה שלו ייכנסו למקומן בנקישה ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. כרטיס הרחבה הסרת כרטיס ההרחבה מסוג PCIe .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כרטיס ההרחבה מסוג :PCIe (aמשוך את תפס השחרור כדי לשחרר את כרטיס ההרחבה מסוג .
.5חזור על השלבים כדי להסיר כרטיס הרחבה מסוג PCIeנוסף. התקנת כרטיס ההרחבה PCIe .1כדי להתקין את כרטיס ההרחבה מסוג :PCIe (aהכנס את כרטיס ההרחבה מסוג PCIeלמחבר בלוח המערכת ].[1 (bהדק את כרטיס ההרחבה מסוג PCIeעל-ידי דחיפת תפס ההחזקה של הכרטיס עד שייכנס למקומו בנקישה . הערה שלב זה רלוונטי רק למחבר עם תפס החזקת כרטיס .אחרת ,דלג על שלב זה.
(cמשוך את תפס השחרור קדימה כדי לסגור ].[2 (dחזור על השלבים כדי להתקין כרטיס הרחבה מסוג PCIeנוסף. .2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מודול VGAאופציונלי הסרת מודול VGAאופציונלי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .
(bנתק את כבל ה VGA-מהמחבר בלוח המערכת ].[1 (cהסר את מודול ה VGA-מהמערכת ].[2 התקנת מודול VGAאופציונלי .1כדי להסיר את תושבות המתכת כמוצג להלן ,הכנס מברג שטוח לתוך החור בתושבת ] ,[1לחץ על התושבת כדי לשחרר את התושבת ] ,[2ולאחר מכן הרם את התושבת אל מחוץ למערכת. .2הכנס את מודול ה VGA-אל תוך החריץ שלו מתוך פנים המחשב ] [1וחבר את כבל ה VGA-למחבר בלוח המערכת ].
.3השב את שני הברגים ) (M3X3למקומם כדי לקבע את מודול ה VGA-האופציונאלי למערכת. .4התקן את מאוורר המערכת. .5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. יחידת ספק זרם הסרת יחידת ספק הכוח או PSU .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .
.5כדי להסיר את ה:PSU- (aהסר את 3הברגים שמהדקים את ספק הכוח למערכת ].[1 (bלחץ על לשונית השחרור ].[2 (cהחלק והרם את ה PSU-מהמחשב ].
התקנת יחידת ספק הכוח או PSU .1כדי להתקין את ספק הכוח: (aהכנס את ה PSU-לתוך חריץ ה PSU-והחלק אותו לכיוון גב המערכת עד שייכנס למקומו בנקישה ].[1 (bהברג חזרה את הברגים כדי להדק את ספק הכוח למחשב ].
(cחבר את כבלי ספק הכוח למחברים בלוח המערכת ].[1 (dנתב את כבלי ספק הכוח דרך תפסי ההחזקה ].[5 ,4 ,3 ,2 (eחבר את כבלי ספק הכוח למחברים בלוח המערכת ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מתג חדירה הסרת מתג החדירה .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מתג החדירה: (aנתק את כבל מתג החדירה מהמחבר שבלוח המערכת ].[1 (bשחרר את הכבל של מתג החדירה מלולאות המאוורר ].
התקנת מתג הפגיעה במארז .1הכנס את מתג החדירה לחריץ שבמערכת ].[1 .2נתב את הכבל של מתג החדירה דרך לולאת המאוורר ].[2 .3חבר את כבל מתג החדירה למחבר שבלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. לחצן הפעלה הסרת לחצן ההפעלה .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי לשחרר את לחצן ההפעלה: (a (b (c (d 48 נתק את כבל לחצן ההפעלה מלוח המערכת ].
.5משוך את לחצן ההפעלה אל מחוץ למחשב.
התקנת לחצן ההפעלה .1הכנס את מתג ההפעלה לתוך החריץ מכיוון החלק הקדמי של המחשב ולחץ עליו עד שייכנס למקומו בנקישה.
.2פתח את דלת הלוח הקדמי ].[1 .3נתב את כבל מתג ההפעלה מלחצן ההפעלה דרך תפס ההצמדה ].[3 ,2 .4ישר את הכבל עם הפינים במחבר ,וחבר את כבל לחצן ההפעלה ].
.5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. רמקול הסרת הרמקול .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את הרמקול: (aנתק את כבלי הרמקולים מהמחבר שבלוח המערכת ].[1 (bהרם את הלשונית ] ,[2והחלק את הרמקול אל מחוץ לחריץ ].
התקנת הרמקול .1הכנס את הרמקול לתוך החריץ ולחץ עליו עד שייכנס למקומו בנקישה ].[1 .2חבר את כבל הרמקול למחבר בלוח המערכת ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. סוללת מטבע הסרת סוללת המטבע .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את סוללת המטבע: (aלחץ על תפס השחרור עד שסוללת המטבע תשתחרר ממקומה ].[1 (bהסר את סוללת המטבע מהמחבר בלוח המערכת ].
הערה הסרת סוללת המטבע עשויה לאתחל את הגדרות לוח המערכת /BIOSהגדרות התקנת סוללת המטבע .1אחוז את סוללת המטבע כאשר הסמל " "+כלפי מעלה ,והחלק אותה תחת לשוניות ההצמדה בצד החיובי של המחבר ].[1 .2לחץ את הסוללה לתוך המחבר עד שתינעל במקומה בנקישה ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מאוורר גוף הקירור הסרת מאוורר גוף הקירור .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול מאוורר גוף הקירור: (aנתק את כבל המכלול של מאוורר של גוף הקירור מהמחבר שבלוח המערכת ].
התקנת המאוורר של גוף הקירור .1הנח את המאוורר על מכלול גוף הקירור ].[1 .2חזק את הברגים ) (4כדי להדק את המאוורר למכלול גוף הקירור ].[2 .3חבר את כבל המכלול של מאוורר גוף הקירור למחבר בלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. גוף קירור הסרת מכלול גוף הקירור .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול גוף הקירור: (aנתק את כבל המכלול של מאוורר של גוף הקירור מהמחבר שבלוח המערכת ].
התקנת מכלול גוף הקירור .1יישר את הברגים של מכלול גוף הקירור עם המחזיקים בלוח המערכת והנח את מכלול גוף הקירור על המעבד ].[1 .2חזק את בורגי החיזוק כדי להדק את מכלול גוף הקירור ללוח המערכת ].[2 הערה חזק את הברגים לפי סדר עוקב ) (4,৺3,2,1כפי שמצוין בלוח המערכת. .3חבר את כבל המכלול של מאוורר גוף הקירור למחבר בלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. ) Processorמעבד( הסרת המעבד .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4הסר את מכלול גוף הקירור. .
התראה אל תיגע בפינים של שקע המעבד ,הם שבירים ועלולים להינזק לצמיתות .היזהר שלא לכופף את הפינים בשקע המעבד בעת הסרת המעבד מהשקע. התקנת המעבד .1הנח את המעבד על השקע כך שהחריצים במעבד יהיו מיושרים עם הבליטות בשקע ].[1 התראה אל תנסה להושיב את המעבד בכוח .כאשר מציבים אותו נכון ,המעבד נכנס בקלות לשקע. .2סגור את מגן המעבד על ידי החלקתו תחת בורג הקיבוע ].[2 .3הורד את ידית השקע ודחף אותה מתחת ללשונית כדי לנעול אותה ].
.4התקן את מכלול גוף הקירור. .5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מאוורר מערכת הסרת מאוורר המערכת .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מאוורר המערכת: (aנתק את כבל מתג החדירה מהמחבר שבלוח המערכת ].
(cנתק את כבל מאוורר המערכת מהמחבר שבלוח המערכת ].[1 (dמתח את הלולאות שמחברות את המאוורר למחשב כדי להקל על הסרת המאוורר ].[2 (eהרם את מאוורר המערכת והוצא אותו מהמחשב ].
התקנת מאוורר המערכת .1הכנס את הלולאות לתוך החריצים שבחלקו האחורי של המחשב. .2החזק את מאוורר המערכת כאשר הכבל פונה כלפי החלק התחתון של המחשב. .3ישר את המסילות שבמאוורר המערכת ביחס ללולאות הגומי שבדופן המארז .4העבר את הלולאות דרך החריצים המתאימים שבמאוורר המערכת ].[1 .5מתח את הלולאות והחלק את מאוורר המערכת לכיון המחשב עד שיינעל במקומו בנקישה ].[2 הערה תחילה התקן את שתי הלולאות התחתונות. .6חבר את כבל מאוורר המערכת למחבר בלוח המערכת ].
.7נתב את הכבל של מתג החדירה דרך לולאת המאוורר ].[2 .8הכנס את כבל מתג החדירה ללוח המערכת ].
.9סגור את דלת הלוח הקדמי. .10התקן את: (aהלוח הקדמי (bכיסוי צד .11בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. לוח המערכת הסרת לוח המערכת .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4הסר את: (a (b (c (d (e (f (g מכלול גוף הקירור מעבד כרטיס הרחבה M.
.6נתק את הכבלים הבאים מלוח המערכת: (a (b (c (d (e מתח ה[1] CPU- נתוני כונן קשיח ונתוני כונן אופטי ][2 רמקול ][3 אספקת חשמל למערכת ][4 [5] SATA .7כדי להסיר את לוח המערכת: (aהסר את הברגים שמהדקים את לוח המערכת למחשב ].
(bהחלק והרם את לוח המערכת והוצא אותו מהמחשב ].
דלת הלוח הקדמי פתיחת הדלת של הלוח הקדמי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי התראה דלת הלוח הקדמי נפתחת במידה מוגבלת בלבד .עיין בתמונה המודפסת על דלת הלוח הקדמי כדי לראות עד כמה ניתן לפתוח את הדלת. .3משוך את הכיסוי של הלוח הקדמי כדי לפתוח אותו. סגירת דלת הלוח הקדמי .1הפוך את דלת הלוח הקדמי כדי לסגור אותה.
.2התקן את: (aהלוח הקדמי (bכיסוי צד .3בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. כונן קשיח בגודל 3.5אינץ' הסרת מכלול הכונן הקשיח בגודל 3.5אינץ' .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3כדי להסיר את מכלול הכונן הקשיח: (aנתק את כבל ה SATA-ואת כבל החשמל מהמחברים של הכונן הקשיח.
(bהסר את תושבת המילוי של הכונן הקשיח מהמערכת ].[1 (cלחץ על הלשוניות הכחולה ] [2ומשוך את מכלול הכונן הקשיח אל מחוץ למערכת ].[3 התקנת מכלול הכונן הקשיח בגודל 3.5אינץ' .1הכנס את מכלול הכונן הקשיח לתוך החריץ במערכת עד שייכנס למקומו בנקישה ].[1 .2הברג חזרה את תושבת מילוי ה.
.3חבר את כבל ה SATA-ואת כבל החשמל למחברים של הכונן הקשיח. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב.
כונן קשיח בגודל 3.5אינץ' הסרת הכונן הקשיח בגודל 3.5אינץ' מתושבת הכונן הקשיח .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי (cמכלול כונן קשיח בגודל 3.5אינץ' .3כדי להסיר את הכונן הקשיח: (aמשוך בצד אחד של תושבת הכונן הקשיח כדי לנתק את הפינים שבתושבת מהחריצים שבכונן הקשיח ].[1 (bהרם את הכונן הקשיח והוצא אותו מתושבת הכונן הקשיח ].[2 התקנת הכונן הקשיח בגודל 3.
מכלול כונן קשיח בגודל 2.5אינץ' הסרת מכלול כונן קשיח בגודל 2.5אינץ' .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול הכונן הקשיח: (aנתק את כבל הנתונים וכבל החשמל של הכונן הקשיח מהמחברים של הכונן הקשיח בגודל 2.5אינץ' ].[1 (bדחף את הלשוניות של המכלול שבשני הצדדים ] [2ומשוך את מכלול הכונן הקשיח אל מחוץ למערכת ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולה המפורטת בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. כונן קשיח בגודל 2.5אינץ' הסרת הכונן בגודל 2.5אינץ' מתושבת הכונן .1בצע את הפעולות המפורטות בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי (cמכלול כונן קשיח בגודל 2.5אינץ' .
התקנת הכונן הקשיח בגודל 2.5אינץ' לתוך תושבת הכונן הקשיח .1כדי להתקין את הכונן הקשיח: (aישר את הכונן הקשיח מול צדה של תושבת הכונן הקשיח ,משוך את הלשוניות בקצה השני כדי להכניס את הפינים על התושבת לכונן הקשיח. (bהכנס את הכונן הקשיח לתושבת הכונן הקשיח עד שיינעל במקומו בנקישה ].[1 (cהכנס את הכונן הקשיח לתושבת הכונן הקשיח עד שיינעל במקומו בנקישה ].[2 .2התקן את: (aמכלול כונן קשיח בגודל 2.5אינץ' (bהלוח הקדמי (cכיסוי צד .
(cלחץ על לשונית השחרור הכחולה ] [1והחלק את הכונן האופטי אל מחוץ למערכת ].
התקנת הכונן האופטי .1להתקנת הכונן האופטי: (aהכנס את הכונן האופטי לתוך תא הכונן האופטי עד שייכנס למקומו בנקישה ].[1 (bפתח את דלת הלוח הקדמי ].
(cנתב את הכבלים מתחת לכלוב הכונן. (dחבר את כבל הנתונים האופטי ואת כבל החשמל למחברים של הכונן האופטי ].[1 (eסגור את הכיסוי של הלוח הקדמי ].
.2התקן את: (aהלוח הקדמי (bכיסוי צד .3בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. M.2 SSD הוצאת כרטיס הM.2 SSD- .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כונן ה:M.2 SSD- (aהסר את הבורג היחיד שמהדק את כונן ה SSD-ללוח המערכת ].[1 (bנתק את כונן ה M.2 SSD-מהמחבר שלו בלוח המערכת ].
התקנת כונן הM.2 SSD- .1הכנס את כרטיס ה M.2 SSD-למחבר שבלוח המערכת ].[1 .2החזר את הבורג הבודד כדי לקבע את כרטיס ה SSD-ללוח המערכת ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. קורא כרטיסי SD הסרת קורא כרטיס הSD- .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כרטיס ה:SD- (aנתק את קורא כרטיסי ה SD-מהמחבר שבלוח המערכת ].
התקנת קורא כרטיס הSD- .1כדי להתקין את קורא כרטיסי ה:SD- (aהכנס את קורא כרטיסי ה SD-לתוך החריץ בדלת הלוח הקדמי ].[1 (bהחזר את הבורג כדי להדק את קורא כרטיסי ה SD-לדלת הלוח הקדמי ].[2 (cחבר את כבל לוח קורא כרטיסי ה SD-אל המחבר שבלוח המערכת ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מודול זיכרון הסרת מודול זיכרון .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מודול הזיכרון: (aמשוך את התפסים שמקבעים את מודול הזיכרון ,עד שהמודול יקפוץ ממקומו כלפי מעלה ].
התקנת מודול הזיכרון .1כדי להתקין את מודול הזיכרון: (aישר את החריץ שבמודול הזיכרון עם הלשונית שבמחבר מודול הזיכרון. (bהכנס את מודול הזיכרון לתוך שקע מודול הזיכרון ].[1 (cלחץ על מודול הזיכרון עד שלשוניות ההחזקה שלו ייכנסו למקומן בנקישה ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. כרטיס הרחבה הסרת כרטיס ההרחבה מסוג PCIe .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את כרטיס ההרחבה מסוג :PCIe (aמשוך את תפס השחרור כדי לשחרר את כרטיס ההרחבה מסוג .
.5חזור על השלבים כדי להסיר כרטיס הרחבה מסוג PCIeנוסף. התקנת כרטיס ההרחבה PCIe .1כדי להתקין את כרטיס ההרחבה מסוג :PCIe (aהכנס את כרטיס ההרחבה מסוג PCIeלמחבר בלוח המערכת ].[1 (bהדק את כרטיס ההרחבה מסוג PCIeעל-ידי דחיפת תפס ההחזקה של הכרטיס עד שייכנס למקומו בנקישה ].[2 (cחזור על השלבים כדי להתקין כרטיס הרחבה מסוג PCIeנוסף.
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. יחידת ספק זרם הסרת יחידת ספק הכוח או PSU .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי לשחרר את ה:PSU- (aנתק את כבלי ה PSU-מהמחברים על לוח המערכת ].[1 (bהוצא את כבלי ספק הכוח מתפסי ההחזקה ].
.5כדי להסיר את ה:PSU- (aהסר את 3הברגים שמהדקים את ספק הכוח למערכת ].[1 (bלחץ על לשונית השחרור ].[2 (cהחלק והרם את ה PSU-מהמחשב ].
התקנת יחידת ספק הכוח או PSU .1כדי להתקין את ספק הכוח: (aהכנס את ה PSU-לתוך חריץ ה PSU-והחלק אותו לכיוון גב המערכת עד שייכנס למקומו בנקישה ].[1 (bהברג חזרה את הברגים כדי להדק את ספק הכוח למחשב ].
(cחבר את כבלי ספק הכוח למחברים בלוח המערכת ].[1 (dנתב את כבלי ספק הכוח דרך תפסי ההחזקה ].[5 ,4 ,3 ,2 (eחבר את כבלי ספק הכוח למחברים בלוח המערכת ].
.2סגור את דלת הלוח הקדמי. .3התקן את: (aהלוח הקדמי (bכיסוי צד .4בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מתג חדירה הסרת מתג החדירה .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מתג החדירה: (aנתק את כבל מתג החדירה מהמחבר שבלוח המערכת ].[1 (bשחרר את הכבל של מתג החדירה מלולאות המאוורר ].
התקנת מתג הפגיעה במארז .1הכנס את מתג החדירה לחריץ שבמערכת ].[1 .2נתב את הכבל של מתג החדירה דרך לולאת המאוורר ].[2 .3חבר את כבל מתג החדירה למחבר שבלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. לחצן הפעלה הסרת לחצן ההפעלה .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי לשחרר את לחצן ההפעלה: (a (b (c (d 94 נתק את כבל לחצן ההפעלה מלוח המערכת ].
.5משוך את לחצן ההפעלה אל מחוץ למחשב.
התקנת לחצן ההפעלה .1הכנס את מתג ההפעלה לתוך החריץ מכיוון החלק הקדמי של המחשב ולחץ עליו עד שייכנס למקומו בנקישה ].[1 .2פתח את דלת הלוח הקדמי ].
.3נתב את כבל מתג ההפעלה מלחצן ההפעלה דרך תפס ההצמדה ].[2 .4ישר את הכבל עם הפינים במחבר ,וחבר את כבל לחצן ההפעלה ].
.5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. רמקול הסרת הרמקול .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את הרמקול: (aנתק את כבלי הרמקולים מהמחבר שבלוח המערכת ].[1 (bהרם את הלשונית ] ,[2והחלק את הרמקול אל מחוץ לחריץ ].
התקנת הרמקול .1הכנס את הרמקול לתוך החריץ ולחץ עליו עד שייכנס למקומו בנקישה ].[1 .2חבר את כבל הרמקול למחבר בלוח המערכת ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. סוללת מטבע הסרת סוללת המטבע .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את סוללת המטבע: (aלחץ על תפס השחרור עד שסוללת המטבע תשתחרר ממקומה ].[1 (bהסר את סוללת המטבע מהמחבר בלוח המערכת ].
הערה הסרת סוללת המטבע עשויה לאתחל את הגדרות לוח המערכת /BIOSהגדרות התקנת סוללת המטבע .1אחוז את סוללת המטבע כאשר הסמל " "+כלפי מעלה ,והחלק אותה תחת לשוניות ההצמדה בצד החיובי של המחבר ].[1 .2לחץ את הסוללה לתוך המחבר עד שתינעל במקומה בנקישה ].
.3סגור את דלת הלוח הקדמי. .4התקן את: (aהלוח הקדמי (bכיסוי צד .5בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מאוורר גוף הקירור הסרת מאוורר גוף הקירור .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול מאוורר גוף הקירור: (aנתק את כבל המכלול של מאוורר של גוף הקירור מהמחבר שבלוח המערכת ].
התקנת המאוורר של גוף הקירור .1הנח את המאוורר על מכלול גוף הקירור ].[1 .2חזק את הברגים ) (4כדי להדק את המאוורר למכלול גוף הקירור ].[2 .3חבר את כבל המכלול של מאוורר גוף הקירור למחבר בלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מכלול גוף הקירור הסרת מכלול גוף הקירור .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4כדי להסיר את מכלול גוף הקירור: (aנתק את כבל המכלול של מאוורר של גוף הקירור מהמחבר שבלוח המערכת ].
התקנת מכלול גוף הקירור .1יישר את הברגים של מכלול גוף הקירור עם המחזיקים בלוח המערכת והנח את מכלול גוף הקירור על המעבד ].[1 .2חזק את בורגי החיזוק כדי להדק את מכלול גוף הקירור ללוח המערכת ].[2 הערה חזק את הברגים לפי סדר עוקב ) (4,৺3,2,1כפי שמצוין בלוח המערכת. .3חבר את כבל המכלול של מאוורר גוף הקירור למחבר בלוח המערכת ].
.4סגור את דלת הלוח הקדמי. .5התקן את: (aהלוח הקדמי (bכיסוי צד .6בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. ) Processorמעבד( הסרת המעבד .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4הסר את מכלול גוף הקירור. .
התראה אל תיגע בפינים של שקע המעבד ,הם שבירים ועלולים להינזק לצמיתות .היזהר שלא לכופף את הפינים בשקע המעבד בעת הסרת המעבד מהשקע. התקנת המעבד .1הנח את המעבד על השקע כך שהחריצים במעבד יהיו מיושרים עם הבליטות בשקע ].[1 התראה אל תנסה להושיב את המעבד בכוח .כאשר מציבים אותו נכון ,המעבד נכנס בקלות לשקע. .2סגור את מגן המעבד על ידי החלקתו תחת בורג הקיבוע ].[2 .3הורד את ידית השקע ודחף אותה מתחת ללשונית כדי לנעול אותה ].
.4התקן את מכלול גוף הקירור. .5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מאוורר מערכת הסרת מאוורר המערכת .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי (cמתג חדירה .3כדי להסיר את מאוורר המערכת: (aנתק את כבל מאוורר המערכת מהמחבר שבלוח המערכת ].
התקנת מאוורר המערכת .1הכנס את הלולאות לתוך החריצים מחלקו האחורי של המחשב. הערה תחילה התקן את שתי הלולאות התחתונות. .2החזק את מאוורר המערכת כאשר הכבל פונה כלפי החלק התחתון של המחשב. .3ישר את המסילות שבמאוורר המערכת ביחס ללולאות הגומי שבדופן המארז .4העבר את הלולאות דרך החריצים המתאימים שבמאוורר המערכת ].[1 .5מתח את הלולאות והחלק את מאוורר המערכת לכיוון המחשב עד שיינעל במקומו בנקישה ].[2 .6חבר את כבל מאוורר המערכת למחבר בלוח המערכת ].
.7סגור את דלת הלוח הקדמי. .8התקן את: (aמתג חדירה (bהלוח הקדמי (cכיסוי צד .9בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. מודול VGAאופציונלי הסרת מודול VGAאופציונלי .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .4הסר את מאוורר המערכת. .
(bנתק את כבל ה VGA-מהמחבר בלוח המערכת ].[1 (cהסר את מודול ה VGA-מהמערכת ].[2 התקנת מודול VGAאופציונלי .1כדי להסיר את תושבות המתכת כמוצג להלן ,הכנס מברג שטוח לתוך החור בתושבת ] ,[1לחץ על התושבת כדי לשחרר את התושבת ] ,[2ולאחר מכן הרם את התושבת אל מחוץ למערכת. .2הכנס את מודול ה VGA-אל תוך החריץ שלו מתוך פנים המחשב ] [1וחבר את כבל ה VGA-למחבר בלוח המערכת ].
.3השב את שני הברגים ) (M3X3למקומם כדי לקבע את מודול ה VGA-האופציונאלי למערכת. .4התקן את מאוורר המערכת. .5סגור את דלת הלוח הקדמי. .6התקן את: (aהלוח הקדמי (bכיסוי צד .7בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב. לוח המערכת הסרת לוח המערכת .1בצע את ההליך המפורט בסעיף לפני העבודה על חלקיו הפנימיים של המחשב. .2הסר את: (aכיסוי צד (bהלוח הקדמי .3פתח את הכיסוי של הלוח הקדמי. .
(fמודול זיכרון (gמאוורר גוף הקירור .5נתק את הכבלים הבאים: (aמתג חדירה (bמתג הפעלה .6נתק את הכבלים הבאים מלוח המערכת: (a (b (c (d (e מתח ה[1] CPU- נתוני כונן קשיח ונתוני כונן אופטי ][2 רמקול ][3 אספקת חשמל למערכת ][4 [5] SATA .7כדי להסיר את לוח המערכת: (aהסר את הברגים שמהדקים את לוח המערכת למחשב ].
(bהחלק והרם את לוח המערכת והוצא אותו מהמחשב ].
התקנת לוח המערכת .1החזק את לוח המערכת בקצותיו והכנס אותו בזווית לכיוון גב המחשב. .2הורד את לוח המערכת לתוך המחשב עד שהמחברים שבגב לוח המערכת יתיישרו ביחס לחריצים שבמארז וחורי הברגים שבלוח המערכת יתיישרו ביחס לבורגי ה Standoff-שבמחשב ].[2 ,1 .3הברג חזרה את הברגים כדי להדק את לוח המערכת למחשב ].
.4נתב את כל הכבלים דרך תפסי הניתוב. .
.6התקן את: (a (b (c (d (e (f מודול זיכרון M.2 SSD כרטיסי הרחבה קורא כרטיסי SD מעבד מכלול גוף הקירור .7חבר את הכבלים הבאים: (aמתג הפעלה (bמתג חדירה .8סגור את דלת הלוח הקדמי .9התקן את: (aהלוח הקדמי (bכיסוי צד .10בצע את הפעולות המפורטות בסעיף לאחר העבודה על חלקיו הפנימיים של המחשב.
5 פתרון בעיות הערכת מערכת משופרת לפני אתחול ePSA - תוכנית האבחון ) ePSAהידועה גם כ'אבחון מערכת'( מבצעת בדיקה מקיפה של החומרה .תוכנית האבחון ePSAמובנית ב BIOS-ומופעלת על ידו כתהליך פנימי .תוכנית אבחון המערכת המובנית מספקת מערך אפשרויות עבור קבוצות התקנים או התקנים מסוימים המאפשר לך: ניתן להפעיל את תוכנית אבחון הערכת מערכת משופרת לפני אתחול באמצעות המקשים FN+PWRבמהלך הפעלת המחשב.
מצב נורית כתום מצב נורית לבן מצב מערכת הערות מצב קודם מצב קודם S3, no PWRGD_PS רשומה זו מספקת את האפשרות לבצע עיכוב ממצב SLP_S3#פעיל למצב PWRGD_PSלא פעיל. מהבהבת כבויה S0, no PWRGD_PS כשל אתחול -המחשב מקבל אספקת חשמל ,והחשמל שמסופק על-ידי ספק הכוח תקין .ייתכן שאירעה תקלה בהתקן או שהוא מותקן באופן שגוי .עיין בטבלה להלן עבור הצעות לכלי אבחון של תבנית ההבהוב של נורית כתומה וכשלים אפשריים.
הערות מצב נורית כתום מצב נורית לבן מצב מערכת 3 3 מצב 6 BIOS קוד ) BIOS POSTדפוס נורית ישן (1000תהליך הגדרת ,MEMלא זוהה זיכרון. 3 4 מצב 7 BIOS קוד ) BIOS POSTדפוס נורית ישן (1001שגיאת לוח אם חמורה. 3 5 מצב 8 BIOS קוד ) BIOS POSTדפוס נורית ישן (1010תהליך הגדרת ,MEM מודולים לא תואמים או לא חוקיים לתהליך הגדרה.
הודעות שגיאה תיאור GENERAL FAILURE מערכת ההפעלה אינה יכולה לבצע את הפקודה .לאחר ההודעה מופיעים בדרך כלל פרטים ספציפיים .לדוגמהPrinter out of paper. , , ) .Take the appropriate actionאזל הנייר .בצע את הפעולה המתאימה( HARD-DISK DRIVE CONFIGURATION ERROR המחשב אינו יכול לזהות את סוג הכונן .כבה את המחשב ,הסר את הכונן הקשיח ואתחל את המחשב דרך כונן אופטי .לאחר מכן ,כבה את המחשב, התקן מחדש את הכונן הקשיח והפעל מחדש את המחשב .
הודעות שגיאה תיאור NO BOOT DEVICE AVAILABLE המחשב אינו מוצא את הכונן הקשיח .אם הכונן הקשיח הוא התקן האתחול שלך ,ודא שהכונן מותקן כהלכה ,ושהוא מחולק למחיצות כהתקן אתחול. NO BOOT SECTOR ON HARD DRIVE ייתכן שמערכת ההפעלה נפגמה ,פנה אל .Dell NO TIMER TICK INTERRUPT ייתכן ויש תקלה באחד השבבים בלוח המערכת .הפעל בדיקות הגדרת מערכת תחת תוכנית האבחון של .Dell NOT ENOUGH MEMORY OR RESOURCES.
הודעת מערכת תיאור ) System fan failureכשל במאוורר המערכת( כשל במאוורר המערכת. ) Hard-disk drive failureכשל בכונן הקשיח( כשל אפשרי של כונן קשיח במהלך .POST ) Keyboard failureכשל במקלדת( כשל במקלדת או כבל רופף .אם חיבור מחדש של הכבל אינו פותר את הבעיה ,החלף את המקלדת. ) No boot device availableאין התקן אתחול זמין( אין מחיצה שניתנת לאתחול בכונן הקשיח ,כבל הכונן הקשיח רופף ,או שלא קיים התקן הניתן לאתחול.
6 קבלת עזרה נושאים: • פנייה אל Dell פנייה אל Dell הערה אם אין לך חיבור אינטרנט פעיל ,תוכל למצוא את פרטי ההתקשרות בחשבונית הקנייה שלך ,בתעודת האריזה ,בחשבון או בקטלוג מוצרי .Dell חברת Dellמציעה מספר אפשרויות לתמיכה ,בטלפון או דרך האינטרנט .הזמינות משתנה בהתאם למדינה ולשירות ,וייתכן כי חלק מהשירותים לא יהיה זמינים באזורך .כדי ליצור קשר עם Dellבנושאי מכירות ,תמיכה טכנית או שירות לקוחות: .1עבור אל .Dell.com/support .2בחר קטגוריית תמיכה. .