Service Manual

L2 Cache
Displays the amount of processor Level 2 cache
L3 Cache
Displays the amount of processor Level 3 cache
Installed Memory
Indicates the amount of installed memory
Memory Speed
Indicates the frequency of installed memory
Memory Technology
Indicates the type of installed memory
SATA 0
Displays the SATA drives connected to the SATA 0 connector
SATA 1
Displays the SATA drives connected to the SATA 1 connector
SATA 2
Displays the SATA drives connected to the SATA 2 connector
SATA 3
Displays the SATA drives connected to the SATA 3 connector
Keyboard Errors
Displays keyboard errors when set to Report. Default is Report

Advanced Settings
CPU Information
Allows you to enable or disable the following functions:
l Virtualization (enabled by default)
l  Cool & Quiet (enabled by default)
l C1E (enabled by default)
Onboard Device
Allows you to set the mode of operation of the following devices on the system board:
l GFX/DisplayPort
¡ x6 —GFX with x16
¡ x8+Display Port (default) — integratedvideocard
l Surround View— Enable ; Disable (default)
l Integrated Audio— Auto; Off; On (default)
l Integrated NIC— Off; On (default); On w/PXE; On w/RPL
l Video Memory Size— Auto (default); 32 MB; 64 MB; 128 MB; 256 MB; 512 MB
l Serial Port #1 — Off; 3F8/IRQ4 (default); 3E8/IRQ4; 2E8/IRQ3
l LPT Port Mode — AT; PS/2 (default); EPP; ECP
l LPT Port Address — 378h (default); 278h; 3BCh
l USBcontroller— On (default); Off; No boot
l Front Dual USB— On (default); Off
l Rear Dual USB— On (default); Off
l Rear Quad USB—On (default); Off
Sata Configuration
Allows you to configure the following:
l SATA Operation — IDE; RAID; AHCI (default)
l HDD Acoustic Mode — Performance; Suggested; Quiet; Bypass (default)
l SATA 0, SATA 1, SATA 2, and SATA 3 — Disable; Enable (default)
l External SATA — Disable; Enable (default)
l SMART Reporting — Disable; Enable (default)
BIOS Events
Provides the following options:
l View Event Log
l Mark all events as read
l Clear Event Log
l Event Log Statistics
System Management
Allows you to configure the following:
l DASH/ASF Configuration — Disable (default); Alert Only; DASH/ASF
l Text Console Redirection — Enabled; Disabled (default)
Computrace
Allows you to permanently activate or disable the Computrace®service from the computer.

Security
Unlock Setup Status
Indicates if the System Setup is locked or unlocked
Admin Password
Displays the status of the administrator password
System Password
Displaysthestatusofthesystempassword
Password Lock
Allows you to enable the system password to be changed with or without providing the admin password.
l Lock (default) — You must provide the admin password to change the system password
l Unlock — You can change the system password without providing the admin password.
Chassis Intrusion
Allows you to configure your computer's chassis intrusion switch:
l On(default) — Enable chassis intrusion detection and report intrusion at power-on self test (POST)
l Off— Disable chassis intrusion detection
l On-Silent— Enable chassis intrusion detection, do not display any detected intrusions.
No Execute
Enables or disables the No Execute Memory Protection Technology.
l On(default)