Service Manual

l Off
TPM Security
Enables or disables the TPM security feature.
l On
l Off (default)
TPM Activation
Activates or deactivates the TPM feature if it is enabled.
l Enable
l Disable
l Don't Change

Power
AC Recovery
Specifies the behavior of the system when AC power is restored after an AC power loss.
l Off (default)
l On
l Last
Auto Power On
Enables the Auto Power On feature
l Disabled (default);
l Enabled
Remote Wake Up
Specifies if your computer can be turned on.
l Disabled
l Enabled (default)
Low Power Mode
Allows the system to conserve power while in hibernate mode.
l On (default)
l Off
Suspend Type
Specifies the power state in suspend mode.
l S1(POS)
l S3(STR) (default)

Boot

NOTE: The items displayed are dynamically updated according to the devices detected
Fast Boot
Speeds up the boot process by bypassing some compatibility steps.
l Off
l On (default)
Numlock Key
Turns on or off the Numlock.
l Off
l On (default)
Wait for "F1" if error
Waits for the F1 key to be pressed when an error occurs.
l Enabled (default)
l Disabled
Post Hot Keys
Specifies the post hot key messages to be displayed.
l Setup and Boot Menu
l Setup
l Boot Menu
l None
1st Boot Device
Specifies the first boot device.
2nd Boot Device
Specifies the second boot device.
3rd Boot Device
Specified the third boot device.
4th Boot Device
Specifies the fourth boot device.

Exit