Dell OptiPlex 7070 Small Form Factor Service Manual Regulatory Model: D11S Regulatory Type: D11S004
Bemærk, forsigtig og advarsel BEMÆRK En NOTE angiver vigtige oplysninger, som hjælper dig med at bruge computeren bedre. FORSIGTIG FORSIGTIG angiver enten en mulig beskadigelse af hardware eller tab af data, og oplyser dig om, hvordan du kan undgå dette problem. ADVARSEL ADVARSEL angiver risiko for tingskade, legemsbeskadigelse eller død. © 2019 Dell Inc. eller dets associerede selskaber. Alle rettigheder forbeholdes. Dell, EMC, og andre varemærker er varemærker tilhørende Dell Inc.
Contents 1 Sådan arbejder du med computeren............................................................................................... 5 Sikkerhedsinstruktioner.........................................................................................................................................................5 Før du udfører arbejde på computerens indvendige dele........................................................................................... 5 Sikkerhedsforanstaltninger....................
Fjernelse af det optiske drev........................................................................................................................................ 33 Sådan installeres det optiske drev............................................................................................................................... 37 Hukommelsesmodul............................................................................................................................................................
1 Sådan arbejder du med computeren Sikkerhedsinstruktioner Følg sikkerhedsinstruktionerne med henblik på din egen sikkerhed og for at beskytte computeren og arbejdsmiljøet mod mulige skader. Hvis intet andet er angivet bygger hver fremgangsmåde i dette dokument på følgende forudsætninger: • • Du har læst sikkerhedsoplysningerne, som fulgte med computeren. En komponent kan genmonteres eller, hvis købt separat, installeres ved at udføre fjernelsesproceduren i omvendt rækkefølge.
Sikkerhedsforanstaltninger Kapitlet om sikkerhedsforanstaltninger giver oplysninger om de primære trin, der skal tages, før nogen instrukser til demontering udføres. Vær opmærksom på følgende sikkerhedsforanstaltninger, før du udfører nogen installationer eller reparationsprocedurer, der omfatter demontering og efterfølgende samling igen: • • • • • • Sluk for systemet og alle tilknyttede perifere enheder. Frakobl systemet og alle tilsluttede perifere enheder fra AC-strøm.
ESD-feltservicesæt Det uovervågede feltservicesæt er det mest almindeligt brugte servicesæt. Hvert feltservicesæt inkluderer tre hovedkomponenter: Antistatisk måtte, håndledsrem og ståltråd. Komponenter i et ESD-feltservicesæt Komponenterne i et ESD-feltservicesæt er: • • • • • • • Antistatisk måtte – Den anti-statiske måtte er dissipativ, og dele kan placeres på den under serviceprocedurer.
3. Løft med dine ben, ikke ryggen. 4. Hold belastningen tæt ind til kroppen. Jo tættere den er på din rygsøjle, jo mindre belaster den ryggen. 5. Hold ryggen ret, både når du løfter, og når du sænker belastningen. Læg ikke din egen kropsvægt til belastningen. Undgå at vride din krop og din ryg. 6. Følg de samme teknikker i omvendt rækkefølge, når du sætter belastningen ned.
2 Teknologi og komponenter Dette kapitel giver detaljerede oplysninger om teknologi og komponenter, der er tilgængelige i systemet. Emner: • • • • • • DDR4 USB-funktioner USB type-C Fordele ved DisplayPort over USB Type-C HDMI 2.0 Intel Optane-hukommelse DDR4 DDR4 (double data rate fourth generation) memory is a higher-speed successor to the DDR2 and DDR3 technologies and allows up to 512 GB in capacity, compared to the DDR3's maximum of 128 GB per DIMM.
Curved edge DDR4 modules feature a curved edge to help with insertion and alleviate stress on the PCB during memory installation. Figure 3. Curved edge Memory Errors Memory errors on the system display the new ON-FLASH-FLASH or ON-FLASH-ON failure code. If all memory fails, the LCD does not turn on. Troubleshoot for possible memory failure by trying known good memory modules in the memory connectors on the bottom of the system or under the keyboard, as in some portable systems.
Hastighed Aktuelt er der 3 hastighedstilstande defineret i de seneste USB 3.0/USB 3.1 Gen 1-specifikationer. Disse er Super-Speed (Superhastighed), Hi-Speed (Højhastighed) og Full-Speed (Fuld hastighed). Den nye SuperSpeed-funktion har en overførselshastighed på 4,8 Gbps. Mens specifikationerne beholder Hi-Speed og Full-Speed USB-tilstandene, almindeligvis kendt som henholdsvis USB 2.0 og 1.
Kompatibilitet Den gode nyhed er, at USB 3.0/USB 3.1 Gen 1 er omhyggeligt planlagt til, fra starten, at kunne sameksistere fredeligt med USB 2.0. Da USB 3.0 specificerer nye fysiske tilslutninger, kræver det således nye kabler, der kan klare de højere hastigheder i den nye protokol. Selve stikket er det samme rektangulære stik med fire USB 2.0 kontakter, på eksakt samme placering som før. Fem nye tilslutninger der kan bære modtage- og senderetning og transmittere data uafhængigt er til stede i USB 3.
kabelreduktion og indholdsbeskyttelse. HDMI understøtter standard, udvidet, eller high definition video, plus flerkanals digital audio over et enkelt kabel. HDMI 2.0-funktioner • • • • • • • • HDMI Ethernet Channel (HDMI Ethernet-kanal) – Tilføjer højhastighedsnetværk til en HDMI-link, hvilket giver brugeren fuld udnyttelse af deres IP-aktiverede enheder uden et separat Ethernet-kabel.
Aktivering af Intel Optane-hukommelse 1. På proceslinjen, klik på søgefeltet, og indtast "Intel Rapid Storage Technology". 2. Klik på Intel Rapid Storage Technology. 3. Klik på Enable i Status fanen for at aktivere Intel Optane-hukommelsen. 4. På advarselsskærmen vælges et kompatibelt hurtigdrev, og derefter klikkes på Yes for at fortsætte aktivering af Intel Optanehukommelse. 5. Klik på Intel Optane memory > Reboot for at aktivere Intel Optane-hukommelsen.
3 Større komponenter i dit system 15
Større komponenter i dit system 16 Større komponenter i dit system
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. Sidedæksel Udvidelseskort Kølelegememodul Harddisk Harddiskbeslag Harddiskramme Optisk diskdrev Strømafbryder Forreste I/O-beslag Frontfacet Højttaler Gummifod Systemkort Hukommelsesmodul Processor Strømforsyningsenhed BEMÆRK Dell stiller en liste over komponenter og deres delnumre til rådighed til den originale købte systemkonfiguration. Disse dele er tilgængelige i overensstemmelse med de garantidækninger, som kunden har købt.
4 Sådan fjernes og installeres komponenter Sidedæksel Fjernelse af sidecover 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. For at fjerne dækslet: a) Skub låsen på bagsiden af dit system, indtil den giver en kliklyd, for at låse sidecoveret [1] op. b) Skub og løft sidecoveret væk fra systemet [2]. Installation af sidedæksel 1. Anbring dækslet på systemet, og skub dækslet, indtil det klikker på plads [1]. 2. Håndtaget låser automatisk sidedækslet til systemet [2].
3. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Udvidelseskort Fjernelse af udvidelseskort 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern sidecoveret. 3. For at fjerne udvidelseskortet: a) Træk i metaltappen for at åbne udvidelseskortets lås [1]. b) Træk i holdertappen på bunden af udvidelseskortet [2]. BEMÆRK Gælder for x16-kortslot, x1-kort har ingen frigivelsestap. c) Afbryd og løft udvidelseskortet ud af stikket på bundkortet [3].
Sådan installeres udvidelseskortet 1. Indsæt udvidelseskortet i stikket og pres på udvidelseskortet indtil det kliker på plads [1]. 2. Luk udvidelseskortets lås og pres indtil det klikker på plads [2].
3. Sådan monteres Sidedækslet. 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Møntcellebatteri Fjernelse af knapcellebatteriet FORSIGTIG Fjernelse af møntcellebatteri kan forårsage nulstilling af bundkortet. 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) Sidedæksel b) Udvidelseskort 3. For at fjerne møntcellebatteriet: a) Ved hjælp af en plastikpen trykkes på udløserknappen, indtil knapcellebatteriet springer ud [1].
Sådan installeres møntcellebatteriet 1. Placer møntcellebatteriet med "+" mærket opad i åbningen på systemkortet [1]. 2. Tryk batteriet ind i holderen, indtil det låser fast [2].
3. Installer: a) Udvidelseskort b) Sidedæksel 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Harddisk-opsætning Afhængig af den konfiguration, du vælger, så vil du have en opsætning med enten en 3,5 tommer harddisk eller to 2,5 tommer harddiske. Sådan fjernes harddiskmodulet 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern sidecoveret. 3.
Sådan installeres harddiskmodulet 1. Juster tapperne på harddisken til hullerne på chassiset ved 30 graders vinkel [1]. 2. Tryk på harddiskholderen, så den bliver fastgjort til harddisken samt det beslaget til det optiske drev [2]. 3.
4. Monter Side cover. 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Harddisk Fjernelse harddisken BEMÆRK For konfigurationer, der leveres med 3,5-tommer HDD skal du følge den samme procedure for at montere HDD’en i sit beslag. 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) Sidedæksel b) harddiskmodul 3. Vrid harddiskens beslag [1], og løft derefter harddisken [2], og skub det derefter ud af harddiskbeslaget [3].
Sådan installeres harddisken BEMÆRK For konfigurationer, der leveres med 3,5-tommer HDD skal du følge den samme procedure for at montere HDD’en i sit beslag. 1. Indsæt hullerne på den ene side af harddisken i stikbenene på harddiskens beslaget [1], og placer derefter harddisken i beslaget, så benene på den anden side af beslaget er justeret ind med hullerne på harddisken [2]. BEMÆRK Følg samme procedure for at montere endnu en 2,5-tommer harddisk på den anden side af beslaget. 2. Installer: a) HDD-modul.
Montering af frontpanelet 1. Placer rammen og sæt rammens fastholdelsestapper ind i åbningerne på systemet. 2. Tryk på rammen, indtil tapperne klikker på plads. 3. Monter Side cover. 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele.
Hard drive and optical drive module Fjernelse af harddisk og optisk drev 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) Sidedæksel b) Frontfacet c) HDD montering 3. Frigørelse af harddisken og det optiske drev: a) Fjern de optiske drevkabler [1] og harddiskkablerne [2] med henholdsvis holdeklipsen og HDD-ODD holdetappen. b) Skub holdetappen på at låse harddisken og det optiske drev [1]. c) Løft harddisken og det optiske drev [2].
4. Fjernelse af harddisk og det optiske drev: a) Frakobl det optisk drevs data og strømkabel fra stikkene på det optiske drev [1, 2]. b) Skub og løft harddisken og det optiske drev ud af systemet [3].
Installation af harddisk og optisk drev 1. Juster tapperne på harddisken og det optiske drev til hullerne i systemet ved 30 graders vinkel [1]. 2. Tilslut det optiske drevs data og strømkabel til stikket på det optiske drev [2, 3].
3. Sænk harddisken og det optiske drev, så de er på plads i slidsen [1]. 4. Skub holdetappen for at låse modulet [2].
5. Før harddiskens data og strømkabler igennem tappen HDD-ODD [1]. 6. Før det optiske drevs data og strømkabler igennem klemmerne [2].
7. Installer: a) HDD montering b) Frontfacet c) Side cover 8. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Optisk drev Fjernelse af det optiske drev 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) Sidedæksel b) Frontfacet 3. For at fjerne det optiske drev: a) Frakoble harddiskens data og strømkabel fra stikkene på harddisken [1, 2].
b) Skub holdetappen på at låse harddisken og det optiske drev [1]. c) Løft harddisken og det optiske drev [2].
d) Afbryd det optiske drevs datakabel og det optiske drevs strømkabel fra stikket på det optiske drev [1, 2], og sænk harddisken og det optiske drev, indtil det sidder på plads.
e) Tryk på udløseren på det optiske drev [1], og træk det optiske drev ud af systemet [3].
Sådan installeres det optiske drev 1. Skub det optiske drev ind på dets plads i systemet [1]. 2. Skub holdetappen på at låse harddisken og det optiske drev [2].
3. Løft harddisken og det optiske drev [1], tilslut det optiske drevs data og strømkabel til stikket på det optiske drev [2, 3].
4. Tilslut harddiskens data samt strømkabel til stikkene på harddisken [1,2].
5. Skub holdetappen for at låse modulet [2]. 6. Installer: a) Frontfacet b) Side cover 7. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Hukommelsesmodul Fjernelse af hukommelsesmodul 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) Sidedæksel Frontfacet HDD montering Harddisk og optisk drev 3. For at fjerne hukommelsesmodulet: a) Lirk holdetapperne fra begge sider for at løfte hukommelsesmodulet ud af stikket [1].
Sådan installeres hukommelsesmodulet 1. Ret hukommelsesmodulets indhak ind efter tappen på hukommelsesmodulets stik. 2. Indsæt hukommelsesmodulet i hukommelsesmodulsoklen [1]. 3. Tryk på hukommelsesmodulet, indtil dets fastgørelsestapper klikker på plads [2].
4. Installer: a) b) c) d) Harddisk og optisk drev HDD montering Frontfacet Side cover 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Kølelegemeblæser Sådan fjernes kølelegemeblæseren 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) Sidedæksel Frontfacet HDD-modul. Harddisk og optisk drev-modul 3. Gør følgende for at fjerne kølelegemeblæseren: a) Frakobl kølelegemets blæserkabel fra stikket på systemkortet [1].
Sådan monteres kølelegemeblæseren 1. Juster kølelegemets blæser ind med kølelegememodulet[1]. 2. Genmonter de 3 skruer for at fastgøre kølelegemeblæseren til kølelegememodulet [2]. 3. Forbind kølelegemeblæserens kabel til stikket på systemkortet [3].
4. Installer: a) b) c) d) Harddisk og optisk drev-modul HDD-modul. Frontfacet Sidedæksel 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Heatsink assembly Sådan fjernes kølelegememodulet 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) Sidedæksel Frontfacet HDD-modul. Harddisk og optisk drev-modul 3. Gør følgende for at fjerne kølelegememodulet: a) Kobl kølelegememodulets blæserkabel fra stikket på systemkortet [1].
BEMÆRK Løsn skruerne i rækkefølge (1,2,3,4) som anvist på systemkortet. Sådan installeres kølelegememodulet 1. Placer kølelegememodulet på processoren [1]. 2. Spænd de 4 fastmonterede skruer for at fastgøre kølelegememodulet til systemkortet [2]. BEMÆRK Stram skruerne i rækkefølgen (1,2,3,4) som angivet på systemkortet. 3. Tilslut kølelegememodulets blæserkabel til stikket på systemkortet [3].
4. Installer: a) b) c) d) Harddisk og optisk drev-modul HDD-modul. Frontfacet Sidedæksel 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Indtrængningskontakt Fjernelse af indtrængningskontakten 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) Sidedæksel Frontfacet HDD montering Harddisk og optisk drev Kølelegememodul 3.
Sådan installeres indtrængningskontakten 1. Indsæt indtrængningskontakten i åbningen i chassiset [1]. 2. Tilslut indtrængningskontaktens kabel til bundkortet [2].
3. Installer: a) b) c) d) e) Kølelegememodul Harddisk og optisk drev HDD montering Frontfacet Side cover 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Strømafbryder Fjernelse af tænd/sluk-knap 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) Sidedæksel Frontfacet HDD montering Harddisk og optisk drev 3. For at fjerne strømafbryderen: a) Frakobl strømafbryderkablet fra systemkortet [1].
Sådan installeres strømafbryderen 1. Skub strømkontaktmodulet ind i dets slot på kabinettet, indtil det klikker på plads [1, 2]. 2. Forbind strømstikket til stikket på systemkortet [3].
3. Installer: a) b) c) d) Harddisk og optisk drev-modul HDD-modul. Frontfacet Sidedæksel 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Processor Fjernelse af processor 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) Sidedæksel Frontfacet HDD-modul. Harddisk og optisk drev-modul Kølelegememodul 3.
c) Løft processoren ud af soklen [3]. BEMÆRK Efter fjernelse af processoren, skal du placere den i en antistatisk kasse til genbrug, aflevering eller midlertidig opbevaring. Rør ikke ved bunden af processoren, for at undgå skader på processorens kontakter. Rør kun ved sidekanterne på processoren. Sådan installeres processoren 1. Placer processoren på soklen, således at spalterne på processoren passer med soklens huller [1].
4. Installer: a) b) c) d) e) Kølelegememodul Harddisk og optisk drev HDD montering Frontfacet Side cover 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. M.2 PCIe SSD Fjernelse af M.2 PCle SSD BEMÆRK Instruktionerne gælder også for M.2 SATA SSD. 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2.
3. For at fjerne M.2 PCle SSD a) Fjern den enkelte (M2x3.5) skrue, der fastgør M.2 PCIe SSD til bundkortet [1]. b) Løft og træk PCIe SSD'en ud af stikket på bundkortet [2]. c) Fjern SSD kølepladen [3]. Installation af M.2 PCIe SSD BEMÆRK Instruktionerne gælder også for M.2 SATA SSD. 1. Placer SSD-kølepladen i holderen på systemkortet [1]. 2. Monter M.2 PCIe SSD i stikket på systemkortet [2]. 3. Udskift den enkelte (M2x3.5) skrue, der fastgør M.2 PCIe SSD til systemkortet [3].
4. Installer: a) b) c) d) e) Kølelegememodul Harddisk og optisk drev HDD montering Frontfacet Side cover 5. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Strømforsyningsenhed Installation af strømforsyningen eller PSU 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) Sidedæksel Frontfacet HDD montering Harddisk og optisk drev Kølelegememodul 3.
a) Fjern CPU-strømkablet fra bundkortet [1]. b) Fjern strømkablerne fra fastholdelsesklemmerne på chassiset [2]. 4. For at fjern PSU'en: a) b) c) d) Fjern de 3 skruer, der fastgør PSU'en til systemet [1]. Afbryd systemets strømkabel fra stikket på bundkortet [2]. Løft kablerne ud af systemet [3]. Tryk på den blå fastgørelsestap [4] i bagenden af PSU'en, skub PSU'en og løft den ud af systemet [5].
Installation af strømforsyningen eller PSU 1. Sæt PSU'en i chassiset, og skub den mod bagsiden af systemet for at fastgøre den [1, 2]. 2. Før systemets strømkabler igennem fastgørelsesklemmerne [3]. 3. Tilslut strømkablet til stikket på systemkortet [4]. 4. Genmonter skruerne for at fastgøre PSU'en til systemets bagside [5].
5. Før PSU kablerne igennem fastgørelsesklemmerne [1]. 6. Tilslut PSU kablerne til stikket på systemkortet [2].
7. Installer: a) b) c) d) e) Kølelegememodul Harddisk og optisk drev HDD montering Frontfacet Sidecover 8. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Højttaler Fjernelse af højttaler 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) Sidedæksel Frontfacet HDD montering Harddisk og optisk drev 3. For at fjerne højttaleren: a) Frakobl højttalerkablet fra stikket på systemkortet [1].
Sådan installeres højttaleren 1. Indsæt højttaleren i holderen på systemets chassis, og tryk indtil den klikker på plads [1, 2]. 2. Tilslut højttalerkablet til stikket på bundkortet [3].
3. Installer: a) b) c) d) Harddisk og optisk drev HDD montering Frontfacet Sidecover 4. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele. Systemkort Fjernelse af systemkort 1. Følg proceduren i Før du udfører arbejde på computerens indvendige dele. 2. Fjern: a) b) c) d) e) f) g) h) i) Sidedæksel Møntcelle Frontfacet HDD-modul. Harddisk og optisk drev-modul Kølelegememodul Processor Hukommelsesmodul M.2 PCIe SSD 3.
a) Fjern den skrue, som holder I/O-panelet fast [1]. b) Drej I/O-panelet opad, og fjern det fra computeren [2]. c) Afbryd harddiskdatakablet [3], datakabel til optisk drev [4] og strømkabel [5] fra stikkene på systemkortet. 5. Frakobl følgende kabler fra stikkene på systemkortet. a) Knap til oplåsning af kabinettet [1] b) CPU-strømstik [2] c) Tænd/Sluk-knap [3] 6. Fjern PSU-kablerne fra fastholdelsesklemmerne [4].
7. Fjernelse af skruerne fra systemkortet: a) Fjern de 5 skruer , der fastgør bundkortet på kabinettet [1]. b) Fjern den ene skrue, der anvendes som monteringspunkt for M.2 SSD-drevet [2] og den ene afstandskrue (# 6-32) [3], der fastgør systemkortet til systemet [3].
8. For at fjerne systemkortet: a) Løft og skub sytemkortet ud af systemet [1, 2].
Sådan installeres systemkortet 1. Hold bundkortet i dets kanter, og før det mod systemets bagside. 2. Sænk bundkortet i systemets kabinet, indtil stikene bag på bundkortet passer med slidserne på kabinettet, og skruehullerne på bundkortet passer med omløbene i systemets kabinet [1,2]. 3. Genmonter den ene skrue, der er brugt som monteringspunkt for M.2 SSD-drevet, den ene afstandsskrue (#6-32) og de 5 skruer der fastgør systemkortet til systemet [1, 2, 3].
4. Før alle kablerne igennem holdeklipsene [1]. 5.
6. Tilslut strømkablet, datakablet til optisk drev og datakablet til harddisk [1, 2, 3]. 7. Sæt låsen til I/O panelet i hullet på kabinettet, og roter for at lukke I/O panelet [4]. 8. Genmonter skruen for at fastgøre I/O-panelet til kabinettet [5].
9. Tilslut følgende kabler: a) Indtrængningskontakt b) Strømafbryder 10. Installer: a) b) c) d) e) f) g) h) M.2 PCIe SSD Hukommelsesmodul Processor Kølelegememodul Harddisk og optisk drev HDD montering Frontfacet Side cover 11. Følg proceduren i Efter du har udført arbejde på computerens indvendige dele.
5 Fejlfinding Enhanced Pre-Boot System Assessment – ePSAdiagnosticering ePSA-diagnostik (også kendt som systemdiagnostik) udfører et fulstændigt tjek af din hardware. ePSA er indlejret med BIOS og er lanceret af BIOS internt. Den indlejrede systemdiagnostik leverer en række muligheder til særlige enheder eller enhedsgrupper, der tillader dig at: The ePSA diagnostics can be initiated by the FN+PWR buttons while powering on the computer.
Ravgul indikatortilstand Hvid indikatortilstand Systemtilstand Bemærkninger Off (Fra) Blinkende S1, S3 Systemet er i en lav strømtilstand, enten S1 eller S3. Dette indikerer ikke en fejltilstand. Forrige tilstand Forrige tilstand S3, ingen PWRGD_PS Denne indstilling giver mulighed for en forsinkelse fra SLP_S3 # aktiv til inaktiv PWRGD_PS. Blinkende Off (Fra) S0, ingen PWRGD_PS Opstarts-fejl - Computeren modtager strøm, og strømmen fra strømforsyningen er normal.
Ravgul indikatortilstand Hvid indikatortilstand Systemtilstand Bemærkninger 3 1 BIOS-tilstand 4 BIOS Post-kode (Gammelt LEDmønster 0100) Samlede PCIenhedsindstillinger eller fejl i video-subsystem-indstillingerne eller fejl. BIOS for at fjerne 0101 videokoden. 3 2 BIOS-tilstand 5 BIOS Post-kode (Gammelt LEDmønster 0110) Samlede lager og USB konfiguration eller defekt. BIOS for at fjerne 0111 USBkoden.
Fejlmeddelelser Beskrivelse ERROR READING PCMCIA CARD Computeren kan ikke identificere ExpressCard. Sæt kortet i igen eller prøv et andet kort. EXTENDED MEMORY SIZE HAS CHANGED Den hukommelsesmængde, der er registreret i NVRAM, svarer ikke til det hukommelsesmodul, der er installeret i computeren. Genstart computeren. Hvis fejlen opstår igen, skal du kontakte Dell.
Fejlmeddelelser Beskrivelse røre ved tastaturet eller tasterne under startrutinen. Kør testen Stuck Key (Låst tast) i Dell Diagnostics. LICENSED CONTENT IS NOT ACCESSIBLE IN MEDIADIRECT Dell MediaDirect kan ikke kontrollere filens DRM (Digital Rights Management )-restriktioner, og filen kan derfor ikke afspilles. MEMORY ADDRESS LINE FAILURE AT ADDRESS, READ VALUE EXPECTING VALUE Et hukommelsesmodul kan være ramt af fejl eller det kan være sat forkert i.
Fejlmeddelelser Beskrivelse TIME-OF-DAY NOT SET-PLEASE RUN THE SYSTEM SETUP Det klokkeslæt eller den dato, der er gemt i system PROGRAM installationsprogrammet, stemmer ikke overens med systemuret. Ret indstillingerne for funktionerne Dato og tid. TIMER CHIP COUNTER 2 FAILED En chip på systemkortet fungerer muligvis ikke korrekt. Kør testene System Set (Systemsæt) i Dell Diagnostics.
6 Sådan får du hjælp Emner: • Kontakt Dell Kontakt Dell BEMÆRK Hvis du ikke har en aktiv internetforbindelse, kan du finde kontaktoplysninger på købskvitteringen, pakkeslippen, fakturaen eller i Dells produktkatalog. Dell giver flere muligheder for online- og telefonbaseret support og service. Tilgængeligheden varierer for de enkelte lande og produkter, og nogle tjenester findes muligvis ikke i dit område. Sådan kontakter du Dell omkring salg, teknisk support eller kundeservice: 1. Gå til Dell.