Service Manual

4 Install the following components:

a System board shield

b Back cover

c Stand

5 Follow the procedure in After working inside your computer.

Pop-Up Camera

Removing the pop-up camera

1 Follow the procedure in Before working inside your computer.

2 Remove the following components:

a Stand

b Back cover

c System board shield

3 To remove the camera assembly:

a Remove the two screws (M3) that secure the camera assembly cover to the middle frame [1].

b Lift the camera assembly cover away from the middle frame [2].

c Disconnect the camera cable from the system board and unroute the camera cable from the routing channel [3].

d Remove the two screws (M3) that secure the pop-up camera assembly to the middle frame [4].

e Slide and remove the pop-up camera assembly o the middle frame [5].

Removing and Installing components