Service Manual

4 Install the following components:
a System board shield
b Back cover
c Cable cover
d Stand
5 Follow the procedure in After working inside your computer.
Power supply unit - PSU
Removing the power supply unit -PSU
1 Follow the procedure in Before working inside your computer.
2 Remove the following components:
a Stand
b Back cover
c System board shield
d Base cover
3 To release the PSU cable:
a Remove the single (M3x5) screw securing the power supply socket to the I/O bracket [1].
b Slide the power supply socket away to remove it from the system [2].
c Unroute the power supply cables from the retention clips in the chassis [3].
d Disconnect the power supply cable from the socket on the system board [4].
NOTE
: Press the clip downward to release the power supply cable from the system board.
Removing and Installing components 55