Service Manual

2 Install the following components:

a Base cover

b System board shield

c Back cover

d Stand

3 Follow the procedure in After working inside your computer.

Input and Output bracket

Removing the Input and Output bracket

1 Follow the procedure in Before working inside your computer.

2 Remove the following components:

a Stand

b Back cover

c System board shield

d Base cover

3 To release the PSU cable:

a Remove the single (M3x5) screw securing the power supply socket to the Input and Output (I/O) bracket [1].

b Slide the power supply socket away to remove it from the system [2].

c Unroute the power supply cables from the retention clips in the chassis [3].

Removing and Installing components