Service Manual

NOTE: Use the pull tab to disconnect the I/O board cable from the system board.

b Remove the I/O board cable, I/O-board power cable, and headset port cable from the routing guides on the display assembly

base [2].

c Remove the two screws (M3x5) securing the I/O board shield to the display assembly base [3].

d Lift the I/O board shield from the display assembly base [4].

4 To remove the I/O board:

a Remove the headset port cable from the routing guide on the I/O board [1].

b Remove the two screws (M3x5) that secure the I/O board to the display assembly base [2].

c Lift the I/O board with its cables from the display assembly base [3].

Removing and Installing components