Service Manual

g Hard drive

h WLAN card

i System board

j PSU

k PSU fan

l Camera

3 Remove the display backlight cable from the routing guides on the display assembly base [1].

4 Remove the 11 screws (M3x5) that secure the middle frame and display assembly base to the display panel [2].

5 Place the system in upright position, holding the display panel and display assembly base, carefully release the display panel from

middle frame and display assembly base [1].

6 Slide the display backlit cable through the slot on the display assembly base [2].

7 Lift the display panel o the middle frame and display assembly base [3].

Removing and Installing components