Setup Guide

Articulating stand for Dell OptiPlex 5260,7460,
and 7760 All-in-One
Topics:
• Installing the articulating stand
• Removing the Articulating Stand
• Articulating stand tilt transform
Installing the articulating stand
1 Follow the procedure in Before working inside your computer.
2 To install the articulating stand:
a Align the tabs on the articulating stand with the slots on the back cover [1].
b Snap the articulating stand into place on the back cover [2].
3 Follow the procedure in After working inside your computer.
Removing the Articulating Stand
1 Follow the procedure in Before working inside your computer.
2 To avoid damaging the display, place the system on a at, soft, and clean surface.
5
Articulating stand for Dell OptiPlex 5260,7460, and 7760 All-in-One 17