Dell OptiPlex 7460 All-in-One Setup and specifications guide Regulatory Model: W19C Regulatory Type: W19C001
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2017 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Set up your computer.....................................................................................................................................5 2 Chassis.........................................................................................................................................................10 Front chassis view............................................................................................................................................................
Virtualization support screen options............................................................................................................................ 37 Wireless screen options................................................................................................................................................... 37 Maintenance screen options...........................................................................................................................................
1 Set up your computer 1 Set up the stand.
Height Adjustable stand 6 Set up your computer
Articulating stand NOTE: The stand comes assembled in the box.
2 Set up the keyboard and mouse. NOTE: See the documentation that shipped with the keyboard and mouse. 3 Route the cable through the stand, then connect the power cable.
4 Press the power button.
2 Chassis Topics: • Front chassis view • Back chassis view • Left chassis view • Right chassis view • Bottom chassis view • Transform • Pop-Up Camera - optional Front chassis view 1 Full high-definition (FHD) camera (optional) 2 FHD infrared (IR) camera (optional) 3 IR emitters (optional) 4 Camera status light (optional) 5 FHD camera (optional) 6 Camera status light (optional) 7 Speakers 8 Power button/Power-status light 9 Array microphones 10 Chassis
Back chassis view 1 Back cover 2 Security lock slot 3 Base cover 4 Stand 1 HDMI-out port (with discrete graphics card) 2 HDMI-in port 3 HDMI-out port (with integrated graphics card) 4 DisplayPort 5 Network port 6 USB 3.1 Gen 1 ports with Power on/ Wake-up support 7 USB 3.
Left chassis view 1 SD card reader 2 USB 3.1 Gen 2 Type-C port 3 Headset/Universal audio port 4 USB 3.
Bottom chassis view 1 Service Tag label 2 Display Built-in Self Test button/Video input selection Transform Basic All-in-One stand Chassis 13
Height Adjustable stand 14 Chassis
Height adjustable stand with optical drive Articulating stand Chassis 15
Pop-Up Camera - optional NOTE: Extend the camera while using any camera function so that the camera is not blocked.
3 System specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information about the configuration of your computer, go to Help and Support in your Windows operating system and select the option to view information about your computer.
Type Intel Core i7 - 8700 (6 Cores/12MB/12T/up to 4.6GHz/65W) Memory Table 2.
Primary/Boot drive Form Factor 1 x 2.5 inch Drive NA 1 x 2.5 inch HDD with M.2 Optane NA NOTE: Supports RAID 0 and 1 with M.2 and 2.5" HDD. For optimal performance when configuring drives as a RAID volume, Dell recommends drive models that are identical.
3 Watt (average) / 4 Watt (peak) Internal Speaker Power Rating Video controller Table 6. Video Controller Type Graphics memory type Intel UHD Graphics 630 UMA Integrated NVIDIA GeForce GTX 1050, 4GB Discrete GDDR5 Table 7. Video port resolution matrix DisplayPort 1.2 HDMI 1.4 HDMI 2.
Communications - Integrated Table 9. Communications - Integrated Network adapter Integrated Intel i219-LM 10/100/1000 Mb/s Ethernet (RJ-45 ) with Intel Remote Wake UP and PXE External ports and connectors Table 10. External ports and connectors USB 3.1 Type A Gen1(Side/Rear/Internal) 1/4/0 • • • USB 3.1 Type C Gen 2 (Side/Rear/Internal) One USB 3.1 Gen 1 port with PowerShare (side) Two USB 3.1 Gen 1 ports with Power on/Wake-up support (rear) Two USB 3.1 Gen 1 ports (rear) 1/0/0 One USB 3.
Luminance • • FHD Touch - 200 cd/m FHD Non-touch - 250 cd/m Active area dimensions 527.04 mm x 296.46 mm Height 296.46 mm Width 527.04 mm Megapixels 2M Pixels Per Inch (PPI) 82 Pixel pitch 0.2745 mm x 0.2745 mm Color depth 16.7 M Contrast ratio (min) 600 Contrast ratio (typical) 1000 Response time (max) 25 min-sec Refresh rate 60 Hhz Horizontal viewing angle 178 degrees Vertical viewing angle 178 degrees Power Table 12.
Max combined 12.0 v power (note: only if more than one 12 v rail) N/A N/A BTUs/h (based on PSU max wattage) 819 BTU 529 BTU Power Supply Fan N/A N/A Erp Lot6 Tier 2 0.5watt requirement Yes Yes Climate Savers / 80Plus Compliant Yes Yes Energy Star 6.1 Qualified Yes Yes FEMP Standby Power Compliant Yes Yes Compliance Table 13. Thermal Dissipation Power Graphics Heat dissipation Voltage 155 W Integrated gfx 155 * 3.4125 = 529 BTU/hr 100 to 240 VAC , 50 to 60 Hz , 3 A/1.
3.0v CMOS battery (Type and estimated battery life) 0°C±2°C: 910Hrs or longer; 890Hrs or longer after 12 months. Physical system dimensions NOTE: System weight and shipping weight is based on a typical configuration and may vary based on PC configuration. A typical configuration includes: integrated graphics and one hard drive. Table 15. System dimensions Non-touch chassis weight without stand (pounds / kilograms) 13.32 / 6.04 Touch chassis weight without stand (pounds / kilograms) 13.34 / 6.
Width x Depth (inches / centimeters) 10.01 x 10.00 / 25.43 x 25.39 Weight (pounds / kilograms) 7.56 / 3.43 Packaging parameters with basic stand (includes packaging material) Height (inches / centimeters) 19.09 / 48.50 Width (inches / centimeters) 32.56 / 82.70 Depth (inches / centimeters) 7.76 / 19.70 Shipping weight (pounds / kilograms - includes packaging materials) 28.04 / 12.72 Packaging parameters with height adjustable stand Height (inches / centimeters) 19.09 / 48.
Vertical orientation packaging support Yes MultiPack packaging Select countries Energy Efficient Power Supply Yes 26 System specifications
4 System setup System setup enables you to manage your desktop hardware and specify BIOS level options.
Navigation keys NOTE: For most of the System Setup options, changes that you make are recorded but do not take effect until you restart the system. Keys Navigation Up arrow Moves to the previous field. Down arrow Moves to the next field. Enter Selects a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop-down list, if applicable. Tab Moves to the next focus area. NOTE: For the standard graphics browser only.
General screen options This section lists the primary hardware features of your computer. Option System Information Boot Sequence Description • System Information: Displays BIOS Version, Service Tag, Asset Tag, Ownership Tag, Ownership Date, Manufacture Date, and the Express Service Code. • Memory Information: Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory Technology, DIMM A Size, DIMM B Size.
Option Description • Advanced Boot Options Date/Time Never This option allows you the legacy option ROMs to load. By default, the Enable Legacy Option ROMs is disabled. • Restore Settings - Restores the default settings of the computer • Save Settings - Saves the settings of the computer • Apply - Enables you to apply the settings • Exit - Exits and starts the computer Allows you to change the date and time.
Option Description If USB port is enabled, device attached to this port is enabled and available for OS. If USB port is disabled, the OS cannot see any device attached to this port. The options are: • Enable USB Boot Support • Enable Rear USB Ports: Include options for 6 ports • Enable Side USB Ports: Include options for 2 ports All the options are enabled by default. NOTE: USB keyboard and mouse always work in the BIOS setup irrespective of these settings.
Option Description NOTE: Successful password changes take effect immediately. Default setting: Not set Internal HDD-0 Password Allows you to set, change or delete the system’s internal hard disk’s password. Default setting: Not set NOTE: Successful password changes take effect immediately. M.2 SATA SSD Password Allows you to set, change, or delete system's M.2 SATA solid state drive (SSD) password. Strong Password Allows you to enforce the option to always set strong passwords.
Option Description • Deactivate • Disable • Activate NOTE: The Activate and Disable options will permanently activate or disable the feature and no further changes will be allowed Default setting: Deactivate Chassis Intrusion This field controls the chassis intrusion feature. The options are: • Disabled • Enabled Default setting: Disabled OROM Keyboard Access Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot.
Option Description Expert Key Management Allows you to manipulate the security key databases only if the system is in Custom Mode. The Enable Custom Mode option is disabled by default. The options are: • PK • KEK • db • dbx If you enable the Custom Mode, the relevant options for PK, KEK, db, and dbx appear.
Option Description Default setting: The option is enabled. C-States Control Allows you to enable or disable the additional processor sleep states. • C states Default setting: The option is enabled. Intel TurboBoost Allows you to enable or disable the Intel TurboBoost mode of the processor. • Enable Intel TurboBoost Default setting: The option is enabled.
Option Description Wake on LAN/ WLAN Allows you to enable or disable the feature that powers on the computer from the Off state when triggered by a LAN signal. Block Sleep • Disabled: This option is enabled by default. • LAN Only • WLAN Only • LAN or WLAN • LAN with PXE Boot This option lets you block entering to sleep (S3 state) in operating system environment.
Option Description • MEBx Hotkey Enable USB Provision This option specifies whether the MEBx Hotkey function should be enabled when the system boots. Enable MEBx Hotkey - enabled by default. Virtualization support screen options Option Description Virtualization Allows you to enable or disable the Intel Virtualization Technology. Enable Intel Virtualization Technology (default).
Option Description First Power On Date This option lets you set Ownership date. This option is disabled by default. System Log screen options Option Description BIOS Events Allows you to view and clear the System Setup (BIOS) POST events. Advanced configuration options Option Description ASPM Allows you to set the ASPM level. • Auto (default) • Disabled • L1 Only System and setup password Table 17.
3 Type the system password that you entered earlier in the Confirm new password field and click OK. 4 Press Esc and a message prompts you to save the changes. 5 Press Y to save the changes. The computer reboots. Deleting or changing an existing system setup password Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and/or Setup password.
5 Software This chapter details the supported operating systems along with instructions on how to install the drivers. Topics: • Supported operating systems • Downloading drivers • Intel chipset drivers • Display adapter drivers • Audio drivers • Network drivers • Camera drivers • Storage drivers • Security drivers • Bluetooth drivers • USB drivers Supported operating systems Table 18.
Intel chipset drivers Verify if the Intel chipset drivers are already installed in the system. Display adapter drivers Verify if the drivers for the display adapter is already installed in the system. Audio drivers Verify if the audio drivers are already installed in the system. . Network drivers Verify if network drivers are already installed in the system.
Camera drivers Verify if the camera driver is already installed in the system. Storage drivers Verify if the storage controller drivers are already installed in the system. Verify if the storage drivers are already installed in the system. Security drivers Verify if the security drivers are already installed in the system. Bluetooth drivers Verify if the Bluetooth drivers are already installed in the system. USB drivers Verify if the USB drivers are already installed in the system.
6 Getting help Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog. Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues: 1 Go to Dell.com/support. 2 Select your support category.