Owners Manual

Table 1. OptiPlex 7480 All-in-One screw list (continued)
Component Screw type Quantity Screw image
Microphones M2x2.5 4
Side I/O-board shield M3x5 2
Side-I/O board M2.5x3.5 2
Antenna modules M2x2.5 2
Display panel M3x5 11
Middle frame M3x5 17
Audio board M3x5 1
Stand
Removing the fixed stand
Prerequisites
1. Follow the procedure in Before working inside your computer.
NOTE:
When servicing the system, place it on an elevated, clean, and flat surface. Dell recommends removing the stand to
avoid accidental damage to the system display during servicing.
About this task
The following image provides a visual representation of the fixed stand removal procedure.
12
Removing and installing components