Owners Manual

Steps

1. Align the screw holes on the system-board shield with the screw holes on the display-assembly base.

2. Replace the five screws (M3x5) to secure the system-board shield to the display-assembly base.

Next steps

1. Install the back cover.

2. Install the cable cover (optional).

3. Install the stand.

4. Follow the procedure in After working inside your computer.

Solid-state drive

Removing the M.2 2230 solid-state drive

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the stand.

3. Remove the cable cover (optional).

4. Remove the back cover.

5. Remove the system-board shield.

Removing and installing components