Owners Manual

Steps

1. Connect the antenna cables to the wireless card.

The following table provides the antenna-cable color scheme:

Table 2. Antenna-cable color scheme

Connectors on the wireless card Antenna-cable color

Main (white triangle) White

Auxiliary (black triangle) Black

2. Place the wireless-card bracket on the wireless card.

3. Align the notch on the wireless card with the tab on the wireless-card slot.

4. Slide the wireless card at an angle into the wireless-card slot.

5. Replace the screw (M2x2.5) to secure the wireless-card bracket to the wireless card.

6. Align and place the wireless-card shield on the system board and wireless card.

7. Replace the two screws (M2x2.5) to secure the wireless-card shield to the system board.

8. Route the antenna cables through the routing guides on the wireless-card shield.

Next steps

1. Install the system-board shield.

2. Install the back cover.

3. Install the cable cover (optional).

4. Install the stand.

5. Follow the procedure in After working inside your computer.

Removing and installing components