Owners Manual

Steps

1. Align the screw holes on the microphone modules with the screw holes on the middle frame.

2. Replace the four screws (M2X2.5) to secure the microphone modules to the middle frame.

3. Route the microphone cable through the routing guides on the display-assembly base and connect the microphone cable to

the system board.

Next steps

1. Install the speakers.

2. Install the rear-I/O bracket.

3. Install the bottom cover.

4. Install the system-board shield.

5. Install the back cover.

6. Install the cable cover (optional).

7. Install the stand.

8. Follow the procedure in After working inside your computer.

Side I/O-board

Removing the side-I/O board

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the stand.

3. Remove the cable cover (optional).

4. Remove the back cover.

Removing and installing components