Owners Manual
Removing and Installing components
Topics:
• Recommended tools
• Screw size list
• System board layout
• Rubber feet
• Cable cover - optional
• Stand
• Back cover
• Hard drive
• Solid State Drive -SSD
• Solid State Drive -2230
• Memory module
• System board shield
• Intel Optane
• WLAN card
• System fan
• Heat sink
• Pop-Up Camera
• Coin cell battery
• Processor
• Base cover
• Power supply unit - PSU
• Power supply unit fan - PSU fan
• Input and Output bracket
• System board
• Speakers
• Power button board
• Microphones
• Input and Output board
• Headset port
• Antennas
• Display panel
• Display cable
• Middle frame
Recommended tools
The procedures in this document require the following tools:
• Phillips #0 screwdriver
• Phillips #1 screwdriver
• Plastic scribe
NOTE:
The #0 screw driver is for screws 0-1 and the #1 screw driver is for screws 2-4
3
Removing and Installing components 13