Owners Manual

3. Install the Stand.

4. Follow the procedure in After working inside your computer

Stand

Removing the stand

The following procedure applies only to systems that are shipped with a Height adjustable stand (HAS) stand :

1. Follow the procedure in Before working inside your computer.

2. To avoid damaging the display, place the system on a flat, soft, and clean surface .

3. To remove the stand:

a) Press and slide the release tab forward on the cover [1].

b) Hold the tab in the release position and lift the stand upward [2].

c) Slide downward to lift the stand off the back cover [3].

Removing and Installing components