Owners Manual

4. Install the following components:

a) System board shield

b) Back cover

c) Stand

5. Follow the procedure in After working inside your computer.

Solid State Drive -2230

Removing the 2230 SSD card

1. Follow the procedure in Before working inside your computer.

2. Remove the following components:

a) Stand

b) Back cover

c) System board shield

3. Remove the screw (M2x2.5) that secures the SSD card to the system board [1].

4. Slide and remove the SSD card from the card slot on the system board [2].

5. Remove the thermal pad [3].

Removing and Installing components