Owners Manual

4. Install the following components:
a) System board shield
b) Back cover
c) Stand
5. Follow the procedure in After working inside your computer.
Memory module
Removing the memory module
1. Follow the procedure in Before working inside your computer.
2. Remove the following components:
a) Stand
b) Back cover
3. To locate the memory module on the system board, pry open the DIMM door on the system board shield [1].
4. Pry the retention clips at each end of the memory module slot until the memory module pops up [2].
5. Lift the memory module from the memory module slot [3].
NOTE:
Depending on the configuration ordered, your system may have up to two memory modules installed on the
system board.
Removing and Installing components 29