Owners Manual

4. Install the following components:

a) System board shield

b) Back cover

c) Stand

5. Follow the procedure in After working inside your computer.

WLAN card

Removing the WLAN card

1. Follow the procedure in Before working inside your computer.

2. Remove the following components:

a) Stand

b) Back cover

c) System board shield

3. To remove the WLAN card shield:

a) Unroute the antenna cable from the routing channel [1].

b) Remove the two screws (M2x2.5) that secure the WLAN card shield to the system board [2].

c) Remove the WLAN card shield from the system board [3].

Removing and Installing components