Owners Manual

3. To replace the camera bezel:
a) Replace the three screws (M3x5) that secure the pop-up camera bezel to the pop-up camera assembly [1].
b) To retract the pop-up camera, press the top of the pop-up camera assembly [2].
4. To replace the camera assembly:
a) Align and place the pop-up camera assembly on the display panel base and route the camera cable through to the routing channel
[1].
b) Replace the two screws (M3x5) that secure the pop-up camera assembly to the middle frame [2].
c) Connect the camera cable to the system board [3].
d) Align and place the pop-up camera assembly cover on the middle frame [4].
e) Replace the two screws (M3x5) that secure the camera assembly cover to the middle frame [5].
Removing and Installing components
47