Owners Manual

Installing the power supply unit -PSU

1. To install the PSU:

a) Align and slide the PSU, in to the slot on the display assembly base [1].

b) Replace the single screw (M3x5) that secures the PSU to the chassis [2].

2. To install the PSU cable:

a) Connect the power supply cable to the socket on the system board [1].

b) Route back the power supply cables through the retention clips in the I/O bracket [2].

c) Slide and replace the power supply socket on the chassis [3].

d) Replace the single (M3x5) screw securing the power supply socket to the I/O bracket [4].

Removing and Installing components