Owners Manual

a) Remove the antenna cables from the routing guides on the display assembly base [1].

b) Remove the two screws (M2x2.5) that secure the antenna modules (2) to the middle frame [2].

c) Carefully peel the tape that secures the antenna cables (2) to the middle frame [3].

d) Release the antenna modules (2) from the tabs and lift the antenna modules off the middle frame.

Installing the antennas

1. To replace the antenna modules:

a) Align the antenna modules (2) with the slots on the middle frame.

b) Adhere the tape that secures the antenna cables (2) to the middle frame [1].

c) Replace the two screws (M2x2.5) that secure the antenna modules (2) to the middle frame [2].

d) Route the antenna cables through the routing guides on the display assembly base [3].

Removing and Installing components