Owners Manual

Installing the display panel
1. Place the display assembly base in its upright position, and slide the display panel into the slot between the middle frame and the
display assembly base [1].
2. Route the touchscreen cable through the routing guide on the display assembly base.
3. Push the display backlight cable through the slots on the display assembly base [2].
4. Push the display panel towards the display assembly base, closing the gap between the display panel and the middle frame [3].
NOTE:
Ensure the display cable, touchscreen cable, and display backlight cable has been fully threaded through the
slots on the display assembly base before closing the gap between the display panel and the middle frame.
84 Removing and Installing components